Hot

Landon · Jun 20, 2024

I have 2 BNIB ZC 527 5-27×56 (MPCT-3X) 10 Mil NLE + 2 Tenebrex ARD + 2 6 MIL 1.5" Block Mounts

SKU 400-0474

Price incl shipping and insurance … PayPal/venmo/check

I would like to sell each of these as a "package"

Asking

$3800 for the scope
$100 for the ARD
$350 for the block mount
$4,250 each package

I have never touched or handled scopes and they have been in the box since I received them 5-6 months ago.

I bought 4 of these and then I sold 2 of these scopes on the Hide a couple of months ago. I still have not had any time to do anything with the last two scopes, so looking to sell.

Here is the link for the last two I sold. These are the same exact everything but adding in the Mount and ARD.

SOLD - FS 2 ZCO 527 5-27×56 (MPCT-3X) 10 Mil NLE

I have 2 BNIB ZC 527 5-27×56 (MPCT-3X) 10 Mil NLE SKU 400-0474 Price incl shipping and insurance … PayPal/venmo/check Asking $3800 each I have never touched or handled scopes and they have been in the box since I received them a month or two ago. I bough 4 of these then realized I’m way...

www.snipershide.com

Thanks
Landon

HIGHENDARMS · Jun 20, 2024

Up for sale is a factory Remington M24 with "RR" prefix serial number as you can see in the photo's. The rifle has a Leupold mark 4 3.5-10x40mm scope. This M24 comes with a list of items from the factory to include its factory accessory pelican case with assorted parts, tools and fasteners. It also has the factory flash hider that is shown in the photo of the rifle in the case. It also has a set of the factory Redfield Precision peep sights with interchangeable front sight which have almost always been lost or misplaced as they are seldomly used, but this one has them. It also has a spare firing assembly and to many other little fasteners to list here but if but rest assured that if you have a screw go missing on the rifle you have a spare. This is a Rare rifle and will make a great display piece in your collection or shooter on the range. Don't let this great M24 get away from you. Below are the photo's of what's included.

Price: $8000.00

To purchase this gun, you must message me though the board here or contact me through our web site email:

[email protected]

We must talk via voice to make any arrangement. Do not wire or send any funds without calling the number you receive by contacting me through this site or via the above email. Pay close attention to that email address as scammers make emails that look similar. Our business is in Tulsa Oklahoma, I am in Tulsa Oklahoma, and our bank is a locally owned bank in Tulsa Oklahoma.

Im2bent · Jun 20, 2024

Login to view embedded media

ma smith · Jun 20, 2024

https://www.washingtonpost.com/style/2024/06/20/alec-baldwin-rust-shooting-video-gun-handling/

The footage allegedly shows Baldwin pointing a prop revolver and firing a blank round at a crew member, using a gun as a pointer to direct crew members on set, and FaceTiming with his family during firearms training, among other “erratic and aggressive behavior.”

Dead Eye Dick · Jun 20, 2024

Watching national news, on the networks….

All they talk about is the Blazing blazing, blistering HEAT. I checked the national weather. Some cities are actually having temperatures in the low 90’s but many are below 90 and some in the 70’s.

Its in the south, its in the north, its in the west…..It’s fucking summer. And frankly, it’s just not That Warm. (According to the National Weather Service which obviously has not gotten the memo ordering to report that we’re suffering global warming, democracy destroying heat)

Sounds way too much like climate propaganda. Listening to the news caster (Opinion caster??) say it, temps more than a 110 are being experienced in every city south of Fairbanks, Alaska and if we (implied) don’t start eating bugs and all of us only drive electric cars and everyone turn off their air condition, each and every one of us will be dead by 10:00 PM this evening. (That would be 10:00 PM, June 20, 2024).

Oh a little add on, they are all going absolutly crazy about Louisiana posting the 10 basic rules of justice used around the world, into our classrooms. OMG this is going to destroy our democracy. (Hope it does so we can go back to being a Constitutional Republic).

Hardpan · Jun 20, 2024

New, unused, and still waxed

$125 shipped conus. PayPal F&F only

lycokayaker · Jun 20, 2024

Hey Gang

I have a Vudoo V22 Gen 3 360 custom with a 1.2 straight taper 22 inch Bartlein barrel with EC tuner screwed direct to the barrel. Barrel job was done at vudoo with the action there. barrel has less than 500 rounds on it. Comes with a Trigger tech diamond pro curve. Barreled action/Trigger can be purchased for 1900 and skip the wait! Comes with 3 mags!!! I ship FFL to FFL

I have these items listed on the forum that can be added

MDT ACC Elite in black with internal weights 2 in total 1400
Baker wings 160

Atomic_Lobster · Jun 20, 2024

Login to view embedded media

Frank Green · Jun 20, 2024

So on top of inflation which we all know is real but you have sleepy Joe saying it isn't so and jobs being created and people are making more money etc...

Then why is Mercury Marine laying off nearly 400 people from the first go around in April to another almost 300 thru this July?

Costs on everything are up and not everyone is running out buying boats and boat motors right now.

I just see more of this coming down the road in other areas of manufacturing. Not just boats.

Former Mercury Marine employees describe anxiety, confusion after hundreds of layoffs

Former employees at Mercury Marine describe anxiety, confusion after hundreds of layoffs at the company's Fond du Lac headquarters.

www.nbc26.com

lycokayaker · Jun 20, 2024

Up for sale is a Primal Rights Competition Primer Seater. In like new condition. Comes with 1 small and 1 large primer tube and conversion. as well as the lee shell holder kit. 600 Shipped to your door

oneshot86 · Jun 20, 2024

StuartV · Jun 19, 2024

I asked this a couple of months ago and got zero responses. But, I probably muddied the waters before by also asking about another can in the same post. So, trying again only simpler this time.

I just got my first 4 cans, ever, so I'm a newb and my questions may make that obvious.

I have now received my new TBAC 338 Ultra BA Gen 2 from ATF jail. A 338BA muzzle brake came with it.

I intend to build or acquire an 8.6BO, so I guess I'll hold onto the 338BA to put on that.

I also have a 308 and a couple of 223s that I would like to be able to use the 338 can on (my other suppressors all being for pistol or 22LR). None of them have muzzle devices yet.

I'm trying to understand what the best approach is.

I *think* the most straightforward is to get:

30BA brake for my 308 (which is not threaded yet)
30BA brake in 1/2-28 (so, 223 aperture) for my 223s

With the 338BA that I already have, mounted to an 8.6BO, I could move the 338 can freely between them all, correct?

But here's the rub. Numerous people have already told me "you're going to want a dedicated 223 can..."

So, I could see myself getting, maybe, a TBAC Ultra 5 or 7 6.5/223 can at some point to use on my 223s.

If I understand things correctly, the Ultra 5 or 7 can would be a CB mount and could not be used on a BA muzzle device. (correct?)

So, another option seems to be:

30CB brake for my 308
223CB brakes for my 223s
CB2BA adapter to let me use the 338 can on those until such time as I get an Ultra 7 can.

My question about that is that the TBAC website describes the CB2BA adapter as "SEMI-PERMANENTLY CONVERTS A BA SERIES SUPPRESSOR TO ACCEPT THE CB SERIES OF MUZZLE DEVICES."

So, what does that "semi-permanently" mean? Am I going to be able to easily move my 338 can around between all 3 calibers if I try to use a CB2BA adapter for the 223 and 308?

Is there more to the use of the CB2BA adapter than just screwing it into the 338 can and tightening it with a wrench?

More to removing the CB2BA adapter than just putting a wrench on to take it out of the 338 can?

I feel like I'm probably over-thinking this and I should be fine to go with the CB muzzle brakes and a CB2BA adapter that I just put in/take out of the can as needed.

ALSO-------------------------------------------------------------------------------

As I have no real investment in muzzle devices yet, I am completely open to a non-TBAC approach.

Is there some other brand of muzzle devices I should be looking at, with some kind of adapter to let me run BA and CB cans on it?

I keep reading about Ecco and Rearden. I looked them both up.

I see on the Ecco site where I can get an adapter to let me use a HUB can on a TBAC CB muzzle device. But, I don't see anything to let me use a TBAC BA or CB can on a non-TBAC brake.

More or less the same for the Rearden site. I don't see anything to help me with a BA can.

OR--------------------------------------------------------

Should I be considering sending my brand new can back to TBAC to get it changed to a HUB mount? I know they are offering HUB on the Ultra 5/7/9, but for some reason I have the idea that they don't even offer it for the 338 Ultra and/or they cannot change it to HUB after it's built with BA.

Thank you for any wisdom you can share on this.

101st · Jun 19, 2024

Login to view embedded media

Joshf303 · Jun 20, 2024

Selling the last of my Bighorn stuff, there will be some accessories and a 22 CM barrel posted that we can make package deals on if interested.

250ish rounds
Mag and .308 BF available (won’t split unless buyer of action doesn’t want one or the other)
Trigger IS NOT included

$1175 shipped to your FFL from an individual. Insurance and any additional fees is on buyer.

Looking for a LP Fuzion LA mag or SA standard bolt face actions, a NF NX8 2–20 as trade bait.

Defiance6x47 · Jun 19, 2024

Selling my Area 419 Hellfire match muzzle brake. Light wear from competition

Specs:
- 5/8 x 24"
- 6.5mm Caliber

Price$100.00 OBO plus shipping

Text or message me with questions 4408659884

Gunfighter14e2 · Jun 20, 2024

in the right direction.

https://www.breitbart.com/politics/2024/06/19/louisiana-becomes-first-state-to-require-ten-commandments-to-be-displayed-in-public-school-classrooms/

Maser · Jun 20, 2024

Login to view embedded media

FJBPrecision · Jun 19, 2024

Both NF are around the same condition. They have been used a good bit and have cosmetic marks. They are NFs and are bullet proof everyone knows that. If you want a new condition then I’m sure there’s plenty of vendors here that can help you. Bells have been wrapped with like a protective tape that can be removed for more photos of your serious about buying. Have boxes for each of them, sun shades, and the other little stuff that comes with them, scope caps are in there too.

Both are 7-35 ATACR F1s with mil-xt reticle

Asking $2425 each for them. Glass is good and I’ll say 98% just because I’m sure someone can find something to complaint about I don’t see any marks on the lens

NO TRADES unless you have a TANGENT THETA available then let’s talk

CasperTheFriendlyGhost · Jun 19, 2024

Hello!

I had a primer shortage, I normally use Federal, but I was worried I was going to run out so I ended up with some CCI that I significantly overpaid for. I have since gotten more Federal so I'm selling what is left of the CCI. I'm sorry the price is high, I'm literally listing them for what I (over)paid for them in an attempt to break even.

1000 CCI Small Rifle Primers #400 - $80
700 CCI Small Rifle Magnum Primers #450 - $60
1000 CCI Large Rifle Magnum Primers #250 - $220
1000 CCI Large Rifle Magnum Primers #250 - $220

The primers are in MN right now, West of Minneapolis, if you want to pick them up. I would be willing to ship them if you want to pay the shipping, I can take them down and send them out, but that is up to you to decide if it's worth it.

I can't accept Paypal, so Zelle, Money Order, or Cash only please. Feel free to message with any questions! Thanks!!

firefighter1178 · Jun 19, 2024

ACC Elite Cert $450

7.62willdo · Jun 19, 2024

Login to view embedded media

AlwineArcher · Jun 19, 2024

AXMCdriver · Jun 19, 2024

Factory 700 Tactical 20” .223 b/a —- no trigger. Approx 700 rounds on it. Not threaded, nice crown. Extremely clean and nice condition. Badger 20 moa base can be included if you want it.

$880 shipped with base
$760 shipped without base

Cadex Defence · Jun 19, 2024

Our good friend Mr. Riggs sent us some pictures of his Rimfire set up in our Strike Pro chassis.

This is an all Canadian built rifle ready for plinking and winning!

traite-Joel Riggs - 20240606_154351[1].jpg

traite-Joel Riggs - 20240606_154355[1].jpg

traite-Joel Riggs - 20240606_154409[1].jpg

traite-Joel Riggs - 20240606_154431[1].jpg

ZCOklahoma · Jun 19, 2024

I know that I will regret this later, but here is my Vudoo 360 22” threaded Bartlein MTU, TT Diamond single stage, 30 MOA Rail, approximately 600 rounds on it, sits in a bedded XLR Envy Pro with 3 internal weights, 6 external weight, thumb rest, MDT Elite grip and a badass custom cerakote paint job. Also comes with 3 mags.

Not looking to separate or trade at this time. I’m posting for 48 hours and will keep it if it doesn’t sell. Shoots SKLRM and RWS50 light out.

$2850 shipped to your FFL. PayPal F&F, Venmo, or Zelle

10 shots @ 100 yards with SKLRM below

Having trouble using the site?

Hot

Hot

Filter

Optics 2 ZCO 527 5-27×56 (MPCT-3X) 10 Mil NLE

SOLD WTS-FACTORY REMINGTON M24 with LEUPOLD MK4 3.5-10X40mm LR/T w/ ACCESSORIES.

Attachments

SOLD WTS Armageddon gear shmedium +1 +1

SOLD Vudoo V22 Gen 3 360 22 inch 1.2 Straight Taper Bartlein barreled action

Attachments

SOLD Primal Right Competition Primer Seater

Attachments

Suppressors Muzzle device options for TBAC 338 Ultra?

SOLD Bighorn TL3 SA…

Attachments

SOLD Hellfire Match Muzzle Brake

SOLD sold

Reloading Equipment CCI Primers, Small Rifle, Small Rifle Magnum, Large Rifle Magnum (headed to TN)

Attachments

SOLD MDT ACC Elite Cert

Attachments

SOLD Sold

Firearms Remington 700 Tactical 223 20” barreled action

Attachments

SOLD Awesome Vudoo 360 in XLR Envy Pro Custom Cerakote