It's been a while since I've been here, but I finally got a nice rifle (SSG 69) and am in process of putting together funds for a NF ATACR FFP and recall that there was a member here who did nice reviews of optical products, a gentleman of Eastern European origin, IIRC. Does this ring a bell for anyone - would like to read up on some of his stuff.

Custom 338 Cadex NF ATACR​

Custom built 338 sniper build. Cadex chassis, Stiller TAC338, Nightforce ATACR F1 7-35x56, Vortex premier rings, TT Diamond, Atlas bipod, QD brake. Close to $8000 invested. Build done at WAR Rifles in Manassas. 9 rounds down the tube to sight in. OSS HX-QD Magnum Ti suppressor available as well, 5 rounds through. 15 boxes of ammo also available for purchase. Purchase price for gun/scope setup only. Will consider partial trades for high end 2011 Staccato, Bul Armory, Watchtower, etc. Located in Northern Virginia for show. Will require all appropriate FFL transfers.
$7000 gun/scope
$1500 OSS Magnum suppressor
$1600 ammo
$9500 total package

Good condition. 5/8x24 thread pitch.

Tac Ops and Surgeon are doing a special on the 591 actions and DBM bottom medals with the Tac bolt handle. The normal price structure is around $1,830.00 for the complete set plus S&H. If you purchase from Tac Ops send a check for $1,390.00 plus S&H. and I’ll have Surgeon, drop ship to your FFL after your check clears…



Tactical Operations, Inc,

9701 Wilshire Blvd. Suite 1000

Beverly Hills, Ca. 90212



To order please call Glenn Minton at Surgeon his contact number is 979-326-1300 ext. 1202. Let him know you had seen this on Snipers Hide and he’ll get everything rolling for you…

I thank you in advance

Mike R,

Looking to sell a few things I likely won't get to use much the next year or so as I'm taking a new position at work that requires travel and I hope to start a family soon. I'm located in Iowa and happy to meet within a reasonable distance; can work on price a little if you want more than one item.

1. Minty CNVD LR (PVS24LR) with full kit and spec sheet. Took this in a trade but I don't shoot steel at night so sending this down the road. I took it from the original owner who bought it new back in May and it is in pristine condition (does not appear to be used hardly at all). 2556 FOM (72lp / 35.5 SNR), 0.5 EBI and 0.72 Halo. No spots on spec sheet, and very clean image from what I have seen (have had all of 2 nights behind it). If you keep things below 15x, I'd say this is 80% of the 3500 FOM PVS30 I sold but it weighs a pound less! Tube pic of a barn at 1400y at 18x through my MK5 (no illumination).

Recent L3 price increases put this at over $11.5k new (I know, some sites show them at $10.5k out of stock), I'm looking to get $9500 shipped and insured. Sold

2. Super Yoter C V1 (can be used as a clip on or scanner) with everything from the factory and then some. In great shape with 2 years left on warranty (doubt you'll need it). This thing is ole faithful and has worked flawlessly for me in the year or so I've had it. Great FOV, good up to 10x or so, and can tell you the difference between a dog and deer at 500y or more. Digital zoom on this thing is very powerful; easy to get to 16x or 20x net magnification between the day optic and 2x or 4x digital. Very light, great mount, good battery life and compact. $300 in add ons included (ADM mount and 16650 battery adapter + 4x batteries and charger). Shot a raccoon at ~290y the other night with it. Looking for $3750 $3000 shipped and insured.

3. Vortex Impact 4000 with everything from the factory + MKM ARD and a tint holder printed by Cory T. Works great and the ballistics have been spot on for me (furthest range I've gotten is 3725 on a tree line so guess you'll have to trust it goes to 4k haha). Comes with 2 rechargeable SureFire CR123 batteries that work great in the cold (have used it down to 0F on a few nights). Looking for $1250 shipped and insured. Sold




If by coincidence you want all of this bundled together, let's talk!

New Defiance AnTi X Right hand, Long Action, Magnum bolt .550”, Black Nitrided


$1525 + $20 shipping

For sale; Badger M2013 7/300 NM ELR Rifle. Will not part out. No trades.
Details;
Badger M2013 7/300 NM ELR rifle built by GA Prescion. Badger 2013 action
Bartlein 28” MTU barrel, 7” twist, silencerco 3 chamber brake.
Trigger Tech trigger
Accuracy International AT chassis with AX stock conversion by Mile High Shooting, non cip length.
Extras; 4 non cip length 338 magazines, RRS R-lock chassis rail, Atlas spigot mount. AI NV bridge and top rail. Custom SKB case. 106 rounds of 7/300 Norma Magnum Hornady 190 A-Tip Ammo. Custom loaded by Copper Creek Cartridge Co. About 180 pieces of single fired brass, in Berry boxes. 3050 fps.
$4000.00 shipped and insured.

Looking for a Manners LA Pro Hunter for a Remington 700 with a sendero barrel channel.

Brand new in the box LVPO 1-4X SFP red illuminated reticle BDC for 55 grain 556 I have this optic and used it for years great glass, the reticle is thin with good wind bars that you can see and can do precise holds. This is by far one of my favorite optics.

Firm $650 shipped, cheaper than any place on sale.

Hi,

Up for sale:

Nightforce Angle Degree Indicator (ADI) with two nicks on the side. The model number is A121. Never shot. $120

Nightforce Ring Cap Bubble Level with ADI Mount. The model number is A129. Never Shot. $50

Package price: $150

shipped & insured to lower 48, Paypal F&F, locally available in Greater Los Angeles/Orange County

PM me if you have any questions. Thanks!

Since Hoyt doesn’t offer replacement cams for their top of the line bows from 7 years ago, I’m wondering if anyone is aware of any copies being produced?
Also kinda curious how much demand there is for them. If there are a bunch of guys out there with $2000 bows they have to throw in the garbage because they can’t get cams, I bet a company could make some money producing replacements.

Anyone have some 2017 30” Carbon Defiant #1 cams they want to sell?

Hey y'all recently got a 22 creedmoor built. 18inch barrel 1-8 (supposed to 1-7 twist). Anyways already ordered some 90 a tips and I have a lot of varget powder laying around wonder if anyone has some load data with varget and heavier bullets? I'm thinking maybe it's too fast burning should go restock on some h4350. Yes scope is not even attached.

This guy got me for $475. for a Garmin Xero. ojs643 had been on the site for several years and had 5 positive references. He even sent me a PM after I paid saying he got delayed and would be shipping that day. Now the entire PM thread has disappeared and it appears ojs643 doesn't exist here anymore.

Miscellaneous AR parts:

Starting at the top, left to right:

1: Magpul MOE stock - spray painted - SOLD

2: Magpul STR stock - black - SOLD

3: Luth stock - black - $25 shipped

4: BA 16” .300 BLK barrel, 7 twist, fired 150 rounds at most. Shoots well, just reconfigured the build - $90 shipped

5: BA 10” .300 BLK barrel, 7 twist, fired 20-40 rounds. Only selling due to reconfiguring the build - SOLD

6: Battle Arms Workhorse 15” free float - spray painted - SOLD

7: Battle Arms Workhorse 15” free float - black - SOLD

Selling mh25. Bought it new used it on a few hunts maybe 4-5. helmet ready mh25. Priced at 2900. Comes with the pvs14 eyepiece and the mount for helmet and all original paperwork/bag.

Is anyone familiar with the cerakote colors used for the VA MULTICAM on the XLR chassis’s ?

S2 delta standard length chassis for model 700 short action and an ergo grip, magpul PRS gen 3 stock and it also comes with a magpul bipod. Would like to get $450 for everything but open to offers or possible trade towards a carbon fiber 6.5 prc barrel for a Zermatt Origin/Solus or TL3

I was buying a lot of steel from a local guy because I figured shipping was probably prohibitively expensive these days, and then I found these guys selling steel on Amazon with free prime shipping and they sell it on their website all with free shipping also.

They are cheaper than any other prices I can find on the Internet by 25 to 50% not even accounting for the free shipping. And they’re having an awesome black Friday sale going on during the next week.

I have no affiliation with them, but I figured I’d point them out. They also have a whole array of ingenious due dad’s for hanging targets

Hi All - If budget/money was not a constraint, what is the rifle you would build for PRS matches? What action, stock/chassis, barrel length, twist rate, caliber, total weight, trigger etc you would choose?

Also, if possible also please share a bit about your experience shooting PRS matches.

Looking to buy a KAC ECC/EMC or similar. Have cash or items for partial trade.

Got this new, shot 40 rounds through it. Love the 60 degree bolt throw but I’m just not shooting it enough.

$800 shipped to your FFL. PP FF, Venmo, cashier check, USPS MO.

Also have a 6.5 CM carbon 6 sendero for sale here and Curtis action wrench available. $550 for barrel and $50 for wrench.

Redding 3-Die Set:
Body Die
Type S Neck Sizing Die
Competition Seater

MidwayUSA has them on sale for $277, I'll let them go for $225 $200 $185 shipped.

Three instructors with massive military, police and competition backgrounds combining there experience to teach you positional shooting as applied to field or competition uses

I’m looking for suggestions about an adapter for an Anvil 30. I searched Mid-west off-road and he hasn’t been on here in a while, guess he’s out of the business. Does anybody know of another maker? This is going on an Artcise/innorel tripod if that matters.

Andy