Is it recommended or not to shoot your load develpment ladders/OCW with the can on if 90% of your shooting will be suppressed? Or is it better to find the load without the can and then tweak as necessary from there?

I’ve got a Trijicon MRO on a BCM mount with a Trijicon 3x magnifier for sale $600 shipped

Looking for a complete DBL bottom metal for a rem700 long action.

Very nice optic, mounted on rifle and kept in safe. No ring marks I can see, one small scuff on windage cap as shown. Will ship in factory box with all factory paperwork. Seekins mount is pristine and will ship in factory tube. Looking for 950$ for both shipped in USA

Lower from a Sig Spear LT. Has 3-400 rnds through it. Has the factory trigger, grip and safety lever. Would be a great match to the MCX regulator that you can get for a good deal right now.

$1000 shipped.

What’s for sale?​

Got two ONE ALL SOLD THANKS black MDT ACC Elite chassis for RH SA Remington 700 available. Both chassis minor usage from Arca accessories and general movement in/out of the safe. All original equipment included (e.g. metal spacer for buttstock, action screws, big ass t-handle to knock your buttstock around in shipping). Each chassis is equipped with a JKL bag rider. Available accessories include: night vision bridges, control bridges, buttstock weight.

How much?​

$1100 shipped per chassis with bag rider. Add $50 for buttstock weight. Add $80 per bridge. Payment via pretty much any electronic means, Zelle preferred. USPS money order, bank or personal checks, and wires also accepted.

Types of minor usage marks are highlighted, but not absolute. Minor rash on one buttstock, bright/wear spots in a few areas, etc.

WTS some NIB Lapua brass.
260 Rem and 6.5 Creedmoor SRP opened for inspection(will verfy count before shipping). All others still sealed. See pics for details.
$120 shipped(usps) per box.

Update:
2x 6CM SRP sold
3x 6.5x47 sold
1x 6.5 CM SRP sold
1x 260 Rem sold
2x 6.5 CM LRP sold
Will update as soon as payments are sent.

Kinda impulse bought a used 7 twist 25 Creedmoor barrel and have Lapua SRP brass coming with it. It's a shorter barrel and I'll be using it for hunting coyotes at night which means I'll be using 70-90 gr bullets but the 7 twist may spin cup and core bullets apart.

Anyone load the Cutting Edge Raptors in a 25 Creed yet that can share some load data? I have 4350 but I think that is better suited for the heavier bullets. I also have some Hornady Superformance powder which seems to work well with lighter bullets in the 6 Creed.

Would value opinions on bullets too; I would go with the 75 VMAX but this barrel will probably spin them apart if I get them much over 3000 fps (and I'd love to get them to 3200+)

Any input is appreciated!

2 titanium blue control bridges and 1 heckler grip for mdt elite chassis.
Asking $200 shipped pp ff, zelle, venmo.

Have 640 pieces once fired from bolt gun. Deprimed and cleaned. I can anneal with amp for a little extra if you want .40 per piece not splitting up. So $250 shipped.

No32Mk1 scope for Lee Enfield No4Mk1 T Sniper rifles.

Made by Kodak Limited .

Fitted with the sliding brass sunshade which functions smoothly.

Adjustments firm and work well, reticle moves as it is supposed to.

Glass is clear and reticle intact.

Has some surface finish oxidisation, from patchy surface rust. Would clean up but i'm not going to touch it.

Comes with repro scope covers

Scope is located in Australia, price includes postage, express tracked international .

Payment Paypal F&F

Watched the first two episodes of Rogue Heroes on EPIX. Based on an excellent book about the early days of the SAS and the 'Originals.'

Series is pretty good so far... I like the mix of Swing and AC/DC in the soundtrack. Some good cinematography paired with some driving '70s and '80's rock. And the collections of vehicles (and the Vimy? Biplane they flew... Wow!!!) They spent serious money on sets and historical stuff for this one.

The book doesn't seem to menton French Agents or cross-dressing. But everyone has to be woke these days I guess. Even the British military in Cairo. Apparently.

The book is really good. Along with the original book by Virginia Cowles... the Phantom Major. Along with The Quiet Soldier and Go Go Go and CQB... some good books on the SAS. If the series whet's your appetite.

Series, so far, is pretty fun! I am looking forward to the airfield attack scenes when they get their Jeeps running!

Sirhr

This is, per Politico via Newsmax. We shall see......

I sold mt TRG22 a few years back, together with the bipod. Now I find myself looking for that bipod again.There is something about that bipod, the simplicity and stability are unequalled by my experience.

I plan on hanging it on front of my manners LRH using the FinnAccuracy TRG adapter. Having said this, regardless of the TRG no long being available, for a few years now, the bipods I am finding for sale are still listed at +/- $500. Maybe I am not looking in the right places. Does anyone know where to find them for less? You'd think they should be discounted by now.

Are there any alternatives to the TRG bipod that you have experience with that might be better? I am referring to the Vison G4 (RPS) or others I might not know about.

Any thoughts? Thanks

What did Sitka do to piss off Euro optic? Seems like a bold move on Euro optic’s part.

Like new Leupold Mark 4 35mm High scope rings.
Leupold Part # 120180
Perfect condition, mounted then unmounted. MSRP is $130. I’ll do $100 $80 shipped in the US. You can also come pick them up in central CA.

This is my first post, but I guess everyone had to have a first post at some point. I am a real person who ordered the wrong height rings, lol, not a scammer. Thanks!

so far its not horrible using 42.5 gr varget .which was maybe a bit to hot . next loading of varget will be 5/10's lighter and i'll go from there ,down a bit more. not like its going to be my go-to bullet .first two in same hole

Over the past 2 years or so I acquired a couple of Garands from the CMP, all "expert grade". The one that I've been fooling around with is an IHC (depicted above) but I've been having some challenges getting it to feed properly.

I'm using newly manufactured enbloc clips that I purchased from ammogarand.com, and have used Garand specific factory ammunition to replicate the M2 ball ammunition from Federal, S&B, & Winchester and keep running into the same feeding problems.

The "expert grade" M1 Garand from the CMP is supposed to be pretty much gtg, new stock, new barrel, etc. but I've got to say this rifle is just giving me a world of issues to get it to feed properly and I don't think I've ever gotten a proper 'ping' from it yet after... 150-200 rounds by my estimate.

I've been trying to research this phenomenon and all of the suggestions seem to point to a weak ejector spring but as far as I can tell, the spring seems to be practically brand new and working properly.

The rifle is also properly greased (using Moblie 1 Synthetic in case anyone would care to ask) but I'm still not getting that desired ping/proper function from this particular rifle. So I'm reaching out to the experts here on how to get this warhorse back in the fight...

Could it be that all of the newly manufactured Enbloc clips are what's giving me fits or is there something incredibly basic/obvious that I'm just missing?

-LD

2 - RimX +5 mag extensions
They have some scratches from using them in matches but functional flawlessly.
$80 shipped for the pair
PpF&F or Venmo

Excellent condition brass Anarchy rail. RRS SOAR locks up real nice on it.

$175 shipped

Anyone running a 108eldm in a 16.5” barrel? I’m wondering what kind of velocity I could expect.

I’m getting 2930fps from a 103eldx in my 20” barrel but thinking about going shorter.

Have one new and one used Unity TAPS SYNC switches for sale.

SPF

Prices shipped in lower 48
PayPal friends and family

This is a new ATACR 4-20x50. Its open box and has one scuff on the objective housing from leaving it out of the box on my desk (looks worse in pic than in person - not noticeable just tried to highlight it here). Comes with box etc

$2500 shipped. No trades

Sold​

What’s for sale?​

A used TBAC SR brake threaded 5/8x24. Wear on the flats commensurate with use, but has been recently cleaned so no carbon junk. If I find an unused peel washer I will send it over with one.

How much?​

$115 shipped slow mail. Any other shipping service cost on you. Payment via pretty much any electronic means, Zelle preferred. USPS money order, back or personal checks, and wires also accepted.

Pic coming soon

The other thread got taken over by anti-medicine howler monkeys and I think many here could benefit from some additional information. I tested high for cholesterol and since I don't trust doctors, or most anyone, I've been researching this topic for several months to make an informed decision about course of action for myself. The topic seems to be extremely complex and far from settled science. Some of my takeaways are:

The disease is largely genetic.
Standard lipid panels tell little about your true risks.
Most treatment protocols are using very dated understandings.
"Good cholesterol", HDL, is largely irrelevant.
"Bad cholesterol", LDL, is a small measurement of risk.
Statins were a best treatment approach for a long time but lacked understanding.
Anti PCSK9 inhibitors seem to be a very promising breakthrough and an alternative to statins.
If you are genetically at high risk you better get on top of it at a young age long before symptoms.

Here is an article I came across today that does a good job at summarizing some of the latest understandings. https://www.msn.com/en-us/health/ot...1&cvid=b6eb6a7970a24495b61f92d71d4cd3ca&ei=35

Some of the most credible information I came across, (best I can tell), was from Dr. Peter Attia. https://peterattiamd.com/ He has a podcast on the subject of cholesterol that's like 7 hours long. For anyone that wants it explained in detail from the early history of Lipid research to some of the latest studies, I highly recommend it. It really educated me to the point I know my Doc doesn't have a good understanding on the subject and my health is in my own hands.