• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Rifle Scopes us optics wont hold zero, help

S

sch2046

Sergeant
Full Member
Minuteman
Jan 19, 2011
426
11
54
Sunbury, OH
#1
I have the sn3, it is brand new. this has happened twice now. I zeroed the scope, shot a match, the next day checked zero and it was .3 high and.1 right, I rezeroed, shot another match last weekend, it was .3 low and .1 right.

second, I have the zero lined up on the erek knob, and the hash marks seem to be off when I get out to about 1.5 mils. I am not sure if i am at 1.6 or 1.7 without counting. I called us optics and they said to mail it back and it would take 4 weeks minimum turn around. I have another match in 3 weeks........I am slowly becoming less of a fan of my new scope. I either have to miss my match or shoot it with a scope that wont track.........Has anyone else had this issue with the sn3?
 
#3
Re: us optics wont hold zero, help

Do you have an EREK? If so have you been setting zero the correct way? To have a shift that goes exactly in and out like you said doesn't sound like a scope issue. Are you keeping the same scope picture?

Are you cleaning between when the shift happens?
 
#4
Re: us optics wont hold zero, help

Yeah, base and rings are tight. It is the scope. I have checked everything, I am a little disappointed with the customer service. My buddy had a problem with his vortex, they truned it around in 5 days.
 
#6
Re: us optics wont hold zero, help

We are talking US Optics right? have you tried to call them? They are usually very responsive, if they are not I would be very surprised.

-K
 
#7
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KNIGHT11B4</div><div class="ubbcode-body">Do you have an EREK? If so have you been setting zero the correct way? To have a shift that goes exactly in and out like you said doesn't sound like a scope issue. Are you keeping the same scope picture?

Are you cleaning between when the shift happens? </div></div>
I set it to the factory settings, like the video showed, then fine tuned with the erek and then lifted the erek and aligned the zero with the zero hash mark then tightened the two allen screws, not sure how to set the zero stop either. I didnt clean between the first match and having to rezero, The second time, i was zeroed and it was after the match that I rechecked and noticed it was off .3 low. I wanted to get it fixed before your match. If I am doing something wrong, I dont know, when I called USO the girl was less than helpful.
 
#8
Re: us optics wont hold zero, help

on lining up the marks, try turning it about 5 mils. Then center the marks on the Erek and crank it back to zero. That always worked for me.
 
#10
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mtscott</div><div class="ubbcode-body">I run two USO SN3s. Never had any tracking or other scope related accuracy problems. </div></div>

It could be me, but if it is, I am at a loss. I will try running it up to 5 mils.
 
#11
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lazy21</div><div class="ubbcode-body">on lining up the marks, try turning it about 5 mils. Then center the marks on the Erek and crank it back to zero. That always worked for me. </div></div>

I will try this. I appreciate the help. It could very well be that I am a moron. Wouldnt be the first time, I just have to figure out what I am doing wrong.
 
#12
Re: us optics wont hold zero, help

if you want to call me, I'll see if I can help(you can call now if you like) I've own a few USO's
wink.gif


(832)519-5041

Julio
 
#14
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 11B-B4</div><div class="ubbcode-body">why not let them know that you have a match in 3 weeks... They might be able to lend you a demo scope while yours is in for work. Worth a shot. I know guys that have had to do that before.

-Evan </div></div>
I did tell her. Julio gave me some help. I am going to try it and see how it does this weekend. I apprecaite everyones help.
Sean
 
#15
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lazy21</div><div class="ubbcode-body"> I've own a few USO's
wink.gif

</div></div>

We don't want to know how many. It might be depressing
laugh.gif
 
#16
Re: us optics wont hold zero, help

i have had this issue before with my old uso. the delrin inside that locks the center erector screw was faulty and when you run the elevation up and brought it back the center screw would move on its own. put your cap on that lets you see the center screw. take a marker and mark the screw and erector with a line. run it up to its full adjustment and bring it back down a few times. look to see if the marks have moved. this will tell you if you have that problem. it was an easy fix at uso to replace it. never had an issue after that.
 
#17
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Killswitch engage</div><div class="ubbcode-body">i have had this issue before with my old uso. the delrin inside that locks the center erector screw was faulty and when you run the elevation up and brought it back the center screw would move on its own. put your cap on that lets you see the center screw. take a marker and mark the screw and erector with a line. run it up to its full adjustment and bring it back down a few times. look to see if the marks have moved. this will tell you if you have that problem. it was an easy fix at uso to replace it. never had an issue after that. </div></div>
I will try this when I get home, thank you very much for this info.
 
#18
Re: us optics wont hold zero, help

sch2046,

Returning to zero is a very uncommon problem we have with our scopes. Lets do this... Try doing what Julio said as he's very knowledgeable with our products. If you still have a problem with your scope give me a call Monday and I will get your scope taken care of.

Jason
 
#19
Re: us optics wont hold zero, help

I had the exact same problem you are experiencing. I checked everything, re-torqued everything and had some of my friends shoot groups to make sure it wasn't me.

Just when I was thinking I broke the scope it turns out my rifle didn't like my newly tweeked load. I tested some of my friend Bill's rounds which were the "team load" and the problem was fixed.

Have you been shooting rounds from the same lot of ammo or are you loading 50, shooting them then loading 50 more and heading to the range?
 
#20
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JFComfort</div><div class="ubbcode-body">I had the exact same problem you are experiencing. I checked everything, re-torqued everything and had some of my friends shoot groups to make sure it wasn't me.

Just when I was thinking I broke the scope it turns out my rifle didn't like my newly tweeked load. I tested some of my friend Bill's rounds which were the "team load" and the problem was fixed.

Have you been shooting rounds from the same lot of ammo or are you loading 50, shooting them then loading 50 more and heading to the range?

</div></div>
same lot. I thought about that. I didnt get a chance to shoot this weekend, due to family issues but I will this coming weekend.
 
#21
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sch2046</div><div class="ubbcode-body">Yeah, I am a little disappointed with the customer service. My buddy had a problem with his vortex, they truned it around in 5 days. </div></div>


that makes it easy just get a RAZOR
 
#23
Re: us optics wont hold zero, help

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Cortney Beard</div><div class="ubbcode-body">That's like saying "That's why I'm getting this Chevy, the Ferrari dealer's turn around time is too long".

Come on, really? </div></div>

A little late to the punch but with the analogy, but yes. +1 These guys are top notch in my book. Whether it’s a simple t shirt order or a decked out sn3, customer service is awesome.
 
You must log in or register to reply here.

Similar threads

bd05320
Night Vision Pulsar Thermion 2 XG50 losing zero
Replies
8
Views
339
kirsch
kirsch
R
Typical windage adjustments needed when zeroing rifle?
Replies
10
Views
399
db2000
db2000
T
Rifle Scopes LPVO Comparison: March Shorty 1-10x vs Kahles K18i-2 1-8x
Replies
34
Views
1K
Denys
Denys
R
Spotters US Optics Warranty
Replies
3
Views
348
Charger442
Charger442
M
Night Vision Basic Thermal Clip ON Q's.
Replies
11
Views
509
Bravo6niner
Bravo6niner
Top Bottom
Back
Home
Forums
Merch
Alerts