Rifle Scopes SWFA SS 5-20x50 rings

[0V3RC10CK3D]

I read the sticky and apparently I'm too retarded to figure it out still.

What rings / ring height are you all running for this scope? I have a Remington 700 5R SS with a 20moa badger ordnance base.

Also what brand should I be looking at? Seekins or Badger Ordnance?

 

[Rifle Barrel Blanks]

Re: SWFA SS 5-20x50 rings

You need to get a set of Seekins Mediums and you will be happy.

 

[billyburl2]

Re: SWFA SS 5-20x50 rings

My vote is for lows. Mine is on a Savage w/ McGowan barrel that is contoured the same as a Shilen #7. Base is a IOR 20 MOA, and I run Badger .823" standard rings. Scopes sits nice and low, but has room for Butler Creeks.

 

[0V3RC10CK3D]

Re: SWFA SS 5-20x50 rings

Will the low's fit? I'd prefer have it as low as possible. Anyone have pictures of their setup?

 

[billyburl2]

Re: SWFA SS 5-20x50 rings

The Seekins lows are only.003" lower, so I think they will work.

 

[elk addict]

Re: SWFA SS 5-20x50 rings

seekins lows worked for me on my savage

and my 10/22

 

[0V3RC10CK3D]

Re: SWFA SS 5-20x50 rings

Very helpful thank you! I've got the rings in my cart but just waiting to see if anyone with a Remington 700 posts just incase

Thanks!

 

[freeflight]

Re: SWFA SS 5-20x50 rings

Is that a Savage LRH in 338LM? I am also interested in one. What kind accuracy are you getting?

Thanks,
Kevin

 

[Josh Elam]

Re: SWFA SS 5-20x50 rings

swfa set me up with seekens lows for my AI.

 

[gopherslayer]

Re: SWFA SS 5-20x50 rings

Go with the lows. My savage has a full bull barrel with a 20moa EGW base and the scope clears no problem. The remmy contour is smaller so the lows will work fine.

 

[winxp_man]

Re: SWFA SS 5-20x50 rings

I run low TPS and they have been perfect for me. Low TPS steel rings and 20 MOA steel base.



Aron-

 

[fireEMT5]

Re: SWFA SS 5-20x50 rings

Low Aadland triple lugs will work too. They are .001" higher than Seekins lows.

 

[FALex]

Re: SWFA SS 5-20x50 rings

I have one in Burris XTR mediums (Rem 5R) and one in Warne Maxima low's (Savage fcp-k). On the Rem, the Burris low's were too low.

 

[wcb6092]

Re: SWFA SS 5-20x50 rings

I have Seekins low on an FN SPR with a 20 moa base. Left enough room for scope covers.

 

[sjbryan308]

Re: SWFA SS 5-20x50 rings

I would recommend American Rifle Company mediums, what I mounted mine with.

 

[JTso]

Re: SWFA SS 5-20x50 rings

It also depends if you are using the factory stock or other stocks with higher cheek rest. I have the same Rem700 5R and the Seekins low rings work fine. However, I needed the high rings when I dropped it into the AICS.

 

[0V3RC10CK3D]

Re: SWFA SS 5-20x50 rings

Thank you very much