Suppressors 7mm mag through 7.62 suppressor?
- Thread starter VKC
- Start date
Re: 7mm mag through 7.62 suppressor?
Have you called AAC and asked to speak to a tech? Im fairly sure you would be fine but the Cyclone might be one of those rated for 308 and smaller, not allowing a magnum or WSM to be fired thru it.
Have you called AAC and asked to speak to a tech? Im fairly sure you would be fine but the Cyclone might be one of those rated for 308 and smaller, not allowing a magnum or WSM to be fired thru it.
Re: 7mm mag through 7.62 suppressor?
This was their response:
The Cyclone is not rated for anything other than .308. Using that silencer on a 7mm WSM, of any barrel length, is a potential hazard to the shooter and any bystanders. AAC does not recommend that the Cyclone be used for any magnum calibers. Thanks for the question and let me know if I can help you out with anything else.
Sincerely,
Cade Patterson | Customer Service Representative
Advanced Armament Corp.
This was their response:
The Cyclone is not rated for anything other than .308. Using that silencer on a 7mm WSM, of any barrel length, is a potential hazard to the shooter and any bystanders. AAC does not recommend that the Cyclone be used for any magnum calibers. Thanks for the question and let me know if I can help you out with anything else.
Sincerely,
Cade Patterson | Customer Service Representative
Advanced Armament Corp.
Re: 7mm mag through 7.62 suppressor?
I looked at all possible calibers my 308 can would be used on before i bought one. I went with an SAS thread on. Rated for 300wm ansd 7rm. The short mags fall in there as well. Was cheaper back the too....
I looked at all possible calibers my 308 can would be used on before i bought one. I went with an SAS thread on. Rated for 300wm ansd 7rm. The short mags fall in there as well. Was cheaper back the too....
Re: 7mm mag through 7.62 suppressor?
+1 When I was looking at cans for my 7WSM, I was told to go for a 300WM rated can, and it would work just fine.
Jeffvn
+1 When I was looking at cans for my 7WSM, I was told to go for a 300WM rated can, and it would work just fine.
Jeffvn
Re: 7mm mag through 7.62 suppressor?
Not just rated for, the 30P-1 & 30BA work awesome on .300 WM/WSM and 7mm RM/WSM. We will warranty these cans for .300 RUM but it won't suppress the RUM as well.
Not just rated for, the 30P-1 & 30BA work awesome on .300 WM/WSM and 7mm RM/WSM. We will warranty these cans for .300 RUM but it won't suppress the RUM as well.
Re: 7mm mag through 7.62 suppressor?
Zak, how about a 300 Norma Mag, are your 30P-1 okay with that, or would you suggest a 338 P-1? Thanks.
Zak, how about a 300 Norma Mag, are your 30P-1 okay with that, or would you suggest a 338 P-1? Thanks.
Re: 7mm mag through 7.62 suppressor?
We haven't tried the 300 NM. My general rule is if there's more than about 80-82 grains of powder, go with the 338P-1. If it's about 80gr or less (ie, heavy .300WM loads), the .30 cal size is fine.
We haven't tried the 300 NM. My general rule is if there's more than about 80-82 grains of powder, go with the 338P-1. If it's about 80gr or less (ie, heavy .300WM loads), the .30 cal size is fine.
Re: 7mm mag through 7.62 suppressor?
I know its not one of the higher end cans, but my Phantom .308 works very well at hushing my 300WSM, .308, ,223 and as soon as I get home I'll be trying my 7SAUM through it.
I know its not one of the higher end cans, but my Phantom .308 works very well at hushing my 300WSM, .308, ,223 and as soon as I get home I'll be trying my 7SAUM through it.
Similar threads
