Rifle Scopes Ring height for a AI AE
- Thread starter Ga-10
- Start date
Re: Ring height for a AI AE
High or x-High.
However if you actually have an AE (not a MkII or MkIII) you will want to be more discriminating since you can't adjust the comb.
High or x-High.
However if you actually have an AE (not a MkII or MkIII) you will want to be more discriminating since you can't adjust the comb.
Re: Ring height for a AI AE
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ga-10</div><div class="ubbcode-body">I place an order for a Us Optics 5-25 and want to know what US Optics rings I should use </div></div>What is the outside objective diameter of the new scope and the width of the scope tube?
And do you need rings that adjust for windage?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Ga-10</div><div class="ubbcode-body">I place an order for a Us Optics 5-25 and want to know what US Optics rings I should use </div></div>What is the outside objective diameter of the new scope and the width of the scope tube?
And do you need rings that adjust for windage?
Re: Ring height for a AI AE
The Cadex UNS mount is going to be an issue.
This is a photo of a 44mm objective (Falcon 4-14x44) mounted in an ADM RECON-S mount.
There is a good possibility you are going to have some clearance issues with a USO 5-25. I would be checking what the overall length of that scope is. The RECON-S is a pretty tall mount and about the correct height for a PVS-22.
I threw this combo together because the Razor was too low/long in it's normal rings to work with the Cadex rail.
The Cadex UNS mount is going to be an issue.
This is a photo of a 44mm objective (Falcon 4-14x44) mounted in an ADM RECON-S mount.
There is a good possibility you are going to have some clearance issues with a USO 5-25. I would be checking what the overall length of that scope is. The RECON-S is a pretty tall mount and about the correct height for a PVS-22.
I threw this combo together because the Razor was too low/long in it's normal rings to work with the Cadex rail.
Re: Ring height for a AI AE
Thanks again for the response the scope is 18 inches, I read that article before receiving the Cadex rail. The side view picture of your gun, the eye box is at the hinge on the folding stock. I measured from there and 18 inches will work. I am running the same night vision.
Thanks again for the response the scope is 18 inches, I read that article before receiving the Cadex rail. The side view picture of your gun, the eye box is at the hinge on the folding stock. I measured from there and 18 inches will work. I am running the same night vision.
Similar threads
