AR-10 and Bushnell HDMR
- Thread starter match308
- Start date
Re: AR-10 and Bushnell HDMR
Would that height work with a continuous rail handguard and 20 MOA of cant? I also am interested in this scope and am considering the GAP unimount but wasn't sure if it would fit.
Thanks,
Brian
Would that height work with a continuous rail handguard and 20 MOA of cant? I also am interested in this scope and am considering the GAP unimount but wasn't sure if it would fit.
Thanks,
Brian
Re: AR-10 and Bushnell HDMR
I have a DPMS LR-308 with a bushnell 6-24x50. I am using a night force unimount. 20 moa cant. 1.125" height. There is at least 0.25" clearance between the bell and the hand guard. The rifle is the model with the elevated integral picatiny rail.
I have a DPMS LR-308 with a bushnell 6-24x50. I am using a night force unimount. 20 moa cant. 1.125" height. There is at least 0.25" clearance between the bell and the hand guard. The rifle is the model with the elevated integral picatiny rail.
Re: AR-10 and Bushnell HDMR
Larue has the LT120 which is 1.28 i believe.
Badger has some 2 piece rings that are 1.25, not sure if that will work or not.
Those are the 2 i am looking at right now.
Larue has the LT120 which is 1.28 i believe.
Badger has some 2 piece rings that are 1.25, not sure if that will work or not.
Those are the 2 i am looking at right now.
Re: AR-10 and Bushnell HDMR
On a flat top I had a loopy 50mm that worked in a 1.1" high 0 MOA. If you want 20 moa-which I recently have been switching a couple ARs to, you need to stick to 1.25 or higher especially if you want the sunshade to clear. That limits your options a bit, the NF 1.375 will work, the spuhr is 1.4+, the american defense is over 1.3, and the AADmount is 1.3something. I have the american defense mount and I don't care for the QD levers, so it sits while I decide on another mount. I also don't care for the multi color NF mount for my evil black rifles so I'm on the fence between the spuhr and the AADmount. I need 2 so maybe 1 of each?
On a flat top I had a loopy 50mm that worked in a 1.1" high 0 MOA. If you want 20 moa-which I recently have been switching a couple ARs to, you need to stick to 1.25 or higher especially if you want the sunshade to clear. That limits your options a bit, the NF 1.375 will work, the spuhr is 1.4+, the american defense is over 1.3, and the AADmount is 1.3something. I have the american defense mount and I don't care for the QD levers, so it sits while I decide on another mount. I also don't care for the multi color NF mount for my evil black rifles so I'm on the fence between the spuhr and the AADmount. I need 2 so maybe 1 of each?
Re: AR-10 and Bushnell HDMR
Look at the Spuhr Mounts as well. Milehigh Shooting has them at a good price and you get a discount.
Look at the Spuhr Mounts as well. Milehigh Shooting has them at a good price and you get a discount.
Similar threads
