Rifle Scopes Spuhr AI mount question

#4
Re: Spuhr AI mount question

As others have said it's for the "older" AI's with a dovetail scope mount rail, not picatinny.

The picture on the page you linked is not accurate, it's showing the picatinny version and not the actual product listed.
 
#7
Re: Spuhr AI mount question

As Lowlight has posted before, please do not quote the spammers. Makes it harder to clean a thread.

Notify the Mods using the Notify button at the bottom of the post and that will take care of it. Please edit your own posts to delete the quotes.
 
#8
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sales@MileHigh</div><div class="ubbcode-body">For a 30mm scope on an AE with a Picatinny rail you'll want the SP-3601 for a Spuhr mount.

-Sean </div></div>

Are you sure that mount fits anywhere on the pic rail, AE pic rail being odd and all ?
 
#10
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TJ.</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sales@MileHigh</div><div class="ubbcode-body">For a 30mm scope on an AE with a Picatinny rail you'll want the SP-3601 for a Spuhr mount.

-Sean </div></div>

Are you sure that mount fits anywhere on the pic rail, AE pic rail being odd and all ?</div></div>

There is only a spot or two but it works. We just sent an AE to an LE event in California with a NF and Spuhr on it. If you have a very narrow mounting length, it may not be the best but for the most part it does work.

-Sean
 
#12
Re: Spuhr AI mount question

Jason is right.
The lower series of our mounts are a problem on AE rifles as their picatinny not is picatinny.
In the spec for picatinny its clearly stated that there should be 10mm (.400") betwen each crossslot.
Our low series of picatinny mounts have the screws halfway down into the picatinny and that is requirng that all the crossslots is there.
293758_10150923428434408_1373417553_n.jpg


On our higher mounts there is only the recoillug visiable from underneat and there is no problems, but of course wants as low mount as possible.
Easyest is likely to buy the US optics picatinny rail as it have all it's crossslots.

384404_10150623926009408_965265567_n.jpg



Best Regards Håkan
 
#15
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Spuhr</div><div class="ubbcode-body">Nope,you must most likely change the picatinny rail.

Håkan
</div></div>

Dang, Have to change the order now--
frown.gif


Is there a 30mm mount available in high?
 
#17
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TJ.</div><div class="ubbcode-body">Is the AE MKIII pic rail the same as the MKII or did they sort that issue out ?</div></div>

Same I believe.
 
#18
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mark5pt56</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Spuhr</div><div class="ubbcode-body">Nope,you must most likely change the picatinny rail.

Håkan
</div></div>

Dang, Have to change the order now--
frown.gif


Is there a 30mm mount available in high? </div></div>

Only cantilevers and that is not what you want.
Getting a proper picatinny rail will be the easyest.....

Håkan
 
#19
Re: Spuhr AI mount question

Hakan, I don't think the rail can be removed and replaced, they are epoxied and pinned.

Mark, as much as I like my Spuhr mounts, I think for the AE you'll be best off with the AI mount. They work very well on the MkII's and as simple as they seem to look it does the job intended perfectly.
 
#20
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">Hakan, I don't think the rail can be removed and replaced, they are epoxied and pinned.

Mark, as much as I like my Spuhr mounts, I think for the AE you'll be best off with the AI mount. They work very well on the MkII's and as simple as they seem to look it does the job intended perfectly. </div></div>

Not on the AE. USOptics sells a 20moa picatinny rail for the AE that will allow you to use the low Spuhr mount.

 
#23
Re: Spuhr AI mount question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body">

Mark, as much as I like my Spuhr mounts, I think for the AE you'll be best off with the AI mount. They work very well on the MkII's and as simple as they seem to look it does the job intended perfectly. </div></div>

Think that's the better option.
 
#24
Re: Spuhr AI mount question

Seems like a great mount. Not sure if this got covered but I shoot lefty due to left eye dominance. (righty by all other account) Is there an option with the level on the right side for us lefty shooters?
 
You must log in or register to reply here.

Similar threads

DrToboggan
Accessories WTS Spuhr SP-3601
Replies
4
Views
229
DrToboggan
DrToboggan
car16smg
Accessories Spuhr 3601
Replies
3
Views
322
car16smg
car16smg
JohnDeereGuy1996
Rifle Scopes Ai elr scope mount
Replies
1
Views
148
ReturnFire
ReturnFire
I
Red dot and mount combo for Spuhr 4002
Replies
6
Views
259
its_sean
I
M
Rifle Scopes Broken Spuhr Mount
Replies
49
Views
2K
roostercogburn98
roostercogburn98
Top Bottom
Back
Home
Forums
Merch
Alerts