Reloader 33 data for edge shooters: My 300gr sierra load consist of 101grs@ 2925 out of 32" bartlein barrel 5R 1in10. Bolt lift is smooth and easy with no primer flattening. The load also has an ES of 10.
338 edge load with reloader 33
- Thread starter alexm_mechanic
- Start date
nice... I am getting 2850 with 98.5 grains of rl33 with 30 inch benchmark barrel. extreme spread isn9 at 28 degrees. 1/4 moa at 200 with bergers.. almost 1 hole!!!
kasey
kasey
When i chronographed the load it was around 50 degrees. Havent really shot load while it was super cold. If looking for some reloader 33 check out precision reloading they had some 8lb jugs for 145 bucks.
I like 98gr.....no surprise. Did you let the cartridges cook in the chamber? I've had velocities increase throughout a string with temp sensitive powders of they sit in an increasingly hot chamber.
I was tempted to try some of these other powders but h-1000 is just too good. I stocked up.
Now If they come out with "nitro turbo xs +p inxs" powder that lets the gun guide itself to the moon....................... Na, I'm good. Just toooooooo good to mess with.
Now If they come out with "nitro turbo xs +p inxs" powder that lets the gun guide itself to the moon....................... Na, I'm good. Just toooooooo good to mess with.
Looks like this thread died off.
I have a 32" KP barrel chambered in 338 edge. It's chambered with a bore rider reamer for 300g Lazers. I have about 20lbs of RL33 I was looking at trying out.
After reading through the thread, what are yall seeing through temp stability, or whats a good starting load.
I have ADG brass, Fed 215M primers, 300g Lazers.
I have a 32" KP barrel chambered in 338 edge. It's chambered with a bore rider reamer for 300g Lazers. I have about 20lbs of RL33 I was looking at trying out.
After reading through the thread, what are yall seeing through temp stability, or whats a good starting load.
I have ADG brass, Fed 215M primers, 300g Lazers.
