• Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

Reloading Equipment Arizona Reloading Buy - Sell - Trade Thread

Status
Not open for further replies.
I was at the Apache Jct store this afternoon and they got a small shipment in of powder. They haven't even unboxed them so I don't know which kind. They were pretty much out of ammo and guns. I talked with the guy at the counter about primers and he said they were on a 14 week waitlist and then last week they got a call and are now on a 2 year waitlist, lol. He said all primers are going to gun manufactures and anything extra will go to the big box stores.
 
I've got 14k Winchester large pistol primers and 8# of 50 BMG powder (Thunderbird T-860) available. Also have some 9mm, .308 and other misc ammo in the connex.

I could use Retumbo or H-1000, Fed 215(M) and Fed 210(M), Accurate No. 5

I'm at Gunsite (Prescott), but will be passing along I-40 to Las Vegas and back next week
 
I have several hundred rounds of once-fired Hornaday 6.5CM brass and once-fired Federal .308 brass in North Scottsdale if anyone is interested.
It seems the going rate is $0.40 - 0.50 per round?

I also have a new size 46 right-hand Creedmoor leather shooting jacket if interested. Would really rather not ship that!
 
Anyone have some 130gn Berger AR Hybrids? Any AI AXMC barrels?

I have 16lbs of H1000 for trade.

Located near Ben Avery.
 
North Phoenix checking in. I'm getting out of 308. I have 1x fired Federal brass, 1 pound of 4064, 400 168gr Hornady match projectiles, RCBS dies, CTS trimmer, LE Wilson case gauge, and probably a few other items im forgetting. I'm also parting out a 308 AR and have a Criterion 16" rlgs barrel with about 350 rounds through it with a SLR adjustable gas block and gas tube. I'm looking for Hornady 6.5 Creedmoor brass, LR primers, and 6.5 projectiles. Send me a pm if interested.

Edit: the Criterion barrel is gone!
 
Last edited:
Phoenix--Have 4+ pounds of Rel.19 to trade for TWO pounds of Rel.17, which I would REALLY like to try in my 'new' 6XC rifle.. Will drive up to two hours (one way) to effect this trade.

...or...

1K of CCI 41 primers (small rifle, designed for 5.56X45 military ammo but works PERFECTLY in my 6Creed). That's $100 retail value of primers for two pounds of powder.. PM me if interested.


Also, more than 470 Sierra MatchKing 110s.. Replacement cost seems to be around $235 or around $220 for my 470+.. Still want some Rel. 17.
 
Last edited:
updated list of needs for my stuff will trade what i have or will outright buy as well
Have the following:
1# of superformance
1k LPP
2# H4350


Looking for:
Varget
IMR 4895
RE15
SPP
SRP
CFE Pistol
Win 231
VIHT N-350
 
Last edited:
Looking for 6.5prc unfired brass. Looking for 100. ADG would be preferred...also 300 prc brass. Once fired is fine.

have factory 6.5 prc ammo, h1000, h4350, and possibly cci450, for trade.
 
Last edited:
I found this on wholesale Hunters website, lol... What's this world coming to. GB is cheaper!
1612979786835.png
 

Attachments

  • 1612979737296.png
    1612979737296.png
    21.5 KB · Views: 69
Phoenix, but will drive for the right deal.

Added Feb. 12--1K of Federal GM205M small Rifle Match Primers. Bought the wrong thing and they're not returnable.

Still looking for Rel. 17.. Can always use CCI #41 SR primers.

Have to trade:
6mm Sierra 110g. MatchKing bullets, at least 310
6mm Nosler 105g. RDF 'Ultra-High Match Bullets, at least 190.
Vortex Strike Eagle Riflescope, 4-24X50 with EBR-5 MOA reticle, #SE-1627, a very good entry-level scope for LR shooting, in excellent condition
GONE/SOLD--6.5 Grendel dies: Lee 3-piece set (resize/decap/mouth expand, 'Easy-Adjust dead Length' bullet-seater, and Factory Crimp die) and Forster Ultra Micrometer Seater Die
6.5-284 dies, Forster Full-Length Sizing Dies and Ultra Micrometer Seater Die
6.5 Creedmoor dies: Forster Full-lenfth Sizing Die and Ultra Micrometer Seater Die, plus Lee Precision B7 collet-neck-sizer/decapper die

All in excellent condition.
 
Last edited:
If anybody wants to do a 1-for-1 trade, I'd like to trade 308 ammo, brass, dies, and CTS trimmer for the same in 300 Blackout. I have 180 rounds of gold medal match 175 SMK and 120 rounds of 185 Berger Juggernaut ammo and probably 300 or so pieces of once fired Federal brass from the same ammo. I also have a pound of IMR4064 I'd trade for a pound of something applicable to 300 Blackout. I'm in north Phoenix near Thunderbird High School.
 
In
I'm in Tucson, and could part with some stuff if needed. I don't really reload for 6.5 Creedmoor anymore so I have some components I could sell there (items in red are items that I have no problem selling/trading, they've been sitting for a long time):

- ~1,500 140 RDF's projectiles
- thousands of hornady brass (all different lots mixed together, shot from factory ammo)
- thousands of RUAG/Prime brass (all different lots most likely, shot from factory ammo)
- ~2,000 FGMM 210 large rifle primers

- Factory 140 AMAX, 140 ELD and 130 Prime 6.5 Creedmoor ammo
- I also have ~16 lbs of H4350, but not sure if I want to give that up yet...

Stuff I need/will accept for trades:

- H4895 powder
- Retumbo/VV N570
- FGMM 168 or 175 factory ammo
- Berger .30 cal 230 hybrids
- Berger 6mm 105 or 109 hybrids
- CCI BR4 primers
Interested in 6.5 creedmore brass, you willing to ship. Primers also but not sure on the mailing part of that
 
In
I'm in Tucson, and could part with some stuff if needed. I don't really reload for 6.5 Creedmoor anymore so I have some components I could sell there (items in red are items that I have no problem selling/trading, they've been sitting for a long time):

- ~1,500 140 RDF's projectiles
- thousands of hornady brass (all different lots mixed together, shot from factory ammo)
- thousands of RUAG/Prime brass (all different lots most likely, shot from factory ammo)
- ~2,000 FGMM 210 large rifle primers

- Factory 140 AMAX, 140 ELD and 130 Prime 6.5 Creedmoor ammo
- I also have ~16 lbs of H4350, but not sure if I want to give that up yet...

Stuff I need/will accept for trades:

- H4895 powder
- Retumbo/VV N570
- FGMM 168 or 175 factory ammo
- Berger .30 cal 230 hybrids
- Berger 6mm 105 or 109 hybrids
- CCI BR4 primers
Interested in 6.5 creedmore brass, you willing to ship. Prime
 
Hi guys-
In the Gold Canyon area until Tuesday night. I have (2) 8lb jugs of VV540 that I will trade for H4895 or Varget. Will sell for $325 each if you don’t have a trade. Also have 1K of cci 400srp to trade for cci BR2 lrp. Will not sell primers.
Cheers
 
Status
Not open for further replies.