Latest activity Postings Featured content Achievements About Feedback Stats
-
-
John Glidewell replied to the thread Fouling past the case neck.What velocities are you seeing? Are you shooting suppressed? I doubt it is annealing. More likely as stated previously: 3-Light... -
Yes, seating primers to the "exact same depth beyond flush" you get variations in they amount of anvil crush and distance from the...
-
John Glidewell replied to the thread Fouling past the case neck.Powder, charge, bullet?
-
John Glidewell replied to the thread 7 prc load help.17 pages of 7 prc https://www.snipershide.com/shooting/threads/7mm-prc.7121760/
-
^ this Can't emphasize this enough. It's all well and good to go down the rabbit hole chasing the last nth degree of perfection...
-
I seat all mine with a rcbs hand priming tool. Never seen a reason to chase primer depth I’d make sure you have all other items in...
-
Here's a rough estimate from QL
-
See post #6 (those are 5-shot groups). I'd personally start around 33.0 and work my way up to about 35. I only went up to 34gr, and...
-
Scheels has 10% off bullets, powder & primers until Sunday
-
John Glidewell reacted to CCISERTDAWG's post in the thread Maggie’s Motivational Pic Thread v2.0 - - New Rules - See Post #1 with
Haha.
-
John Glidewell reacted to Edsel's post in the thread New reloading procedure, "How Bullets are Made" with Haha.
I suppose the procedure would have a similar level of precision to a Lee Dipper (?). They're both volumetric...
-
John Glidewell replied to the thread Vihtavuori in a 6 gt.No. I could not find 109s that did not cost an arm and a leg. I got a few k of 115s. If 109s ever come back at reasonable prices with...
-
Yea the Line-R AVR ive been using for years had 3 lights in the front. Green orange and red.. green was incoming 120V and when it went...
-
I finally retired my APC Line-R that has served me well for so many years providing stable power to my A&D/AT/IP setups over the years...
-
John Glidewell replied to the thread Ingenuity Powder System.Do you ground your scales too? Along with what you mention above, I have found that grounding the scale also helps and is recommended...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
