Recent content by 350 kid

  1. 3

    Gunsmithing 700 Ejection issue

    Re: 700 Ejection issue Any chance the case is hitting the scope turret?
  2. 3

    Gunsmithing PTG throat reamer

    Re: PTG throat reamer Thanks Keith
  3. 3

    Gunsmithing PTG throat reamer

    I am thinking of making my 260's throat longer.Is the PTG throat reamer a tool that a novice can use?Also wondering how much bullet jump will work with standard hunting bullets.My most accurate load with 120 nosler ballistic tip is at 2.780 oal with 2.83 oal seated into rifling.Also wondering if...
  4. 3

    SMK's for deer hunting?

    Re: SMK's for deer hunting? Nosler ballistic tips blow up.They are fine if there isn't any limbs or brush in the way.Accubonds are the best bullet made by nosler for hunting.I test them and see how they expand.Partitions lose the front end,Accubonds retain just as much weight and have a...
  5. 3

    175 Sierra Match King

    Re: 175 Sierra Match King Sierra bullets are accurate but they suck for hunting.Matchking or gamekings are accurate but they either blow up or pencil through.Barnes X bullets have no equal when it comes to a hunting bullet
  6. 3

    Why 30 cal?

    I don't understand why so many people pic a 30 cal for a long range rifle when they could have a 7mm.7mm will do anything a 30 cal will with less drop, less wind deflection and less recoil.300 win/weatherby/ultra mag?308? I'll take my 7 stw or a 7-08 anyday and shoot just as tiny of groups and...
  7. 3

    SMK's for deer hunting?

    Re: SMK's for deer hunting? Sierra bullets are a bad idea for hunting!All of them.They don't expand reliably.I lost a doe because a sierra 225 gr. 35 cal blew up.And that was a 225 grain 35 cal out or a 350rem mag.Barnes x bullets have no equal.I would shoot a 130 gr. ttsx at 3000 fps or...
  8. 3

    Range Report 260 123amax VS 140..

    Re: 260 123amax VS 140.. I'll take speed for a hunting rifle over high bc.123 Amax is high enough bc for me.Just my 2 cents
  9. 3

    260 Loads Only

    Re: 260 Loads Only Remington model 7 cdl 20 inch pencil thin barrel 48gr. Imr 4831,fed 210 match primer,95 gr. Hornady v-max 3 shots .620 outside to outside at 75 yards.About 80 degree's today.Didn't chrony yet.Minimal pressure signs.Slighty flattened primer.
  10. 3

    260 Remington or not

    Re: 260 Remington or not I have a model 7 cdl 260. 20 1nch pencil barrel.I got flyers with the pressure under barrel.Took off pressure and had it glass bedded.I have shot many groups under 1/2 inch with a 7 power scope at 75 yards.Some at 100.It doesn't ride the bags well.My gunsmith beds the...
  11. 3

    Want to start a New Build and need advice

    Re: Want to start a New Build and need advice 6mm remington Ackley improved,260,284 or 6.5/284.
  12. 3

    More Velocity out of .308 155s in 20' bbl?

    Re: More Velocity out of .308 155s in 20' bbl? h4895 gives me just under 3000 fps out of 2 different 20 inch barreled 308's with 150 grain nosler partition, hornady spitzer,nosler ballistic tip.
  13. 3

    7 STW loads

    Re: 7 STW loads Burned in less than 800 rounds?Did you get it hot? I don't even shoot mine if it's over 70 degree's.I shot 4 round when it was in the mid 80's and the barrel was hot for an hour or better.
  14. 3

    7 STW loads

    Re: 7 STW loads Rem 700 Sendero sf 26 inches. 80 grains Reloader 25 and Fed 215 mag primer with 160 gr. Accubond. 3/8" at 100 yards 3270 fps. 150 Nosler Ballistic Tip 83 gr. RL 25 Fed 215 mag 3500 fps.150 gr. Barnes X 82.5 gr. Rl Fed 215 mag 3500 fps.both these loads shoot 1/2 inch if i do my...
  15. 3

    Gunsmithing Remington model 7 magazine length

    Re: Remington model 7 magazine length Thank you Chad.Your work is awesome.I love your posts.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts