K
Latest activity Postings Featured content Achievements About Feedback Stats
-
-
KKiba replied to the thread Accuracy International Picture Thread.About 2 months ago in another thread Greg said he had a couple left and after they are gone he's probably done with the 223 conversions...
-
KKiba replied to the thread Idle thought: 20br in an Accuracy International?.That sled from Sporting Services should work fine. You may want to email CNCSwerks and see if they have any spares sitting around the...
-
KKiba replied to the thread Idle thought: 20br in an Accuracy International?.OK, have some info. I loaded 10 22BRs with 50gr bullets and seated them deep (1.950 OAL) to simulate a 20BR with the 39/40gr bullets...
-
KKiba replied to the thread So what’s that white shit on AI butt pads? And how do I remove it?.What you're seeing in that residue is pure English pride and tradition. After molding but before shipping, every AI buttpad is lovingly...
-
KKiba replied to the thread Idle thought: 20br in an Accuracy International?.22br is a great round for varmints, can run everything from lightweights to heavies, lots more 22 bullets to choose from than 20s. Not a...
-
KKiba replied to the thread Accuracy International AT-XC.Be nice if they did honor it, but they'll just direct you to the terms and conditions on the website...
-
-
KKiba replied to the thread Idle thought: 20br in an Accuracy International?.22BR with longer 75gr bullets will feed somewhat OK in my AX when I tested it for function, but not as reliably as 6 Dasher which is...
-
KKiba replied to the thread Show off your Manners PRS-TCS Stocks.Had to do some digging to find it since I immediately replaced it with a 360 precision steel rail, but here's the latest version...
-
-
KKiba replied to the thread Best method / compound to permanently attach rail to scope ring ?.I'd hedge my bets and use retaining compound or epoxy along with the match drilling and pinning that we both suggested. I meant to add...
-
KKiba replied to the thread Rifle Scopes Vertical adjustment after zeroing.LHT has ~22 mils total elevation adjustment, but you can only dial up 11 mils max from zero if the zero stop is installed or up to the...
-
KKiba replied to the thread Best method / compound to permanently attach rail to scope ring ?.To be pedantic, their name specifically says zero compromise optics. It does not say zero compromise optics, scope mounts, and diving...
-
KKiba replied to the thread Best method / compound to permanently attach rail to scope ring ?.Diving board has the ZCO logo on it. While their scopes may have zero compromises, it appears you can't say the same thing for their...
-
KKiba replied to the thread Best method / compound to permanently attach rail to scope ring ?.I would match drill, ream, and pin the ring cap and diving board with 2 pins if I wanted to take the hard way, and if I wanted the easy...
-
KKiba replied to the thread Straight-pull bolt action.It could be the lug face to bolt face dimension isn't held to a tight enough tolerance between actions for shouldered prefits, hence the...
-
KKiba replied to the thread Rifle Scopes S&B 5-25 vs 3-20 US at 20x.I'm talking about the full length 3-20 because that's what I have several of. I've looked though a 3-20 US and found it gave up some...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
