Recent content by 68hoyt

  1. 6

    Vudoo closed the doors…

    It did / does , but some ingenious guys removed the savage magazine guide , installed Remington aic bottom metal ( these actions have 700 footprint ) then they took plastic Aic mags and glued in the savage magazines , it really needs a straight magazine found to function and fitted in the...
  2. 6

    Vudoo closed the doors…

    He already did , before all of this rimfire stuff took off
  3. 6

    Vudoo closed the doors…

    Some people prefers to be treated different / better than they treat other people ,,,,,,,,, especially if they think highly of themselves
  4. 6

    Vudoo Gun Works V-22 Rimfire Bolt Action

    FYI , on a other forum they pulled the ffl list , no vudoo or Herman ? So the consensus is it’s sketchy,,,,,, it does not look like they are moving to OK , as one person put it that would be a way to stall people to keep them off their backs for a bit Now , people are people , and we are...
  5. 6

    L3i New "Stinger" Barreled action

    Maybe tolerances have changed , it has been almost 3 years ago , please read their experiences before saying anything to me https://www.snipershide.com/shooting/threads/ptg-40x-repeater-action.7108092/
  6. 6

    KI Precision Pre Fit B-14R barrels

    Following
  7. 6

    L3i New "Stinger" Barreled action

    A year or two ago one guy had built a few/several of the PTG repeaters , he stated that the timing was good enough that he thought the barrels could be swapped or that he had swapped them successfully , he also mentioned that he thought it would not be a problem to do a prefit on them ...
  8. 6

    Springfield 2020 barrel

    They are a screw in barrel IIRC , so would probably need to be machined to fit , it would be nice if they were all timed the same and prefit could be made for them , ,,,,,,,,they do use a modified cone breech so a barrel nut but could be used 🤔,
  9. 6

    New .22 actions still coming?

    Yeah ,,,,,Kauger told me two and a half years ago they were about to release it , then last fall they told me it got out on the back burner but they were going to work on it again , we will see The new owners of Stiller promised one , advertised one , told people about one , then sold off the...
  10. 6

    Springfield 2020 .22LR

    I read where it’s threaded , also read a couple of post like above where people have had luck with experimenting with action screw torque
  11. 6

    Springfield 2020 .22LR

    Welcome aboard and thanks for sharing your info
  12. 6

    New Winchester 52D

    I need to order one of those mounts , how much clearance do you have between the bolt handle and scope bell ? Nice shooter by the way !!! 👍🏻
  13. 6

    Shout out about your builds

    I’m with RTH , early 1900’s they shot out to 200 yards with 22 in match’s iirc , I believe 3 position , are the new rifles that much better than the “Best “ old rifles ? I agree we can get new components to build rifles of extreme quality and accuracy easier than in the past , and the...
  14. 6

    New Bolt Action from Springfield Armory (700 footprint, 10/22 mags)

    From what I’ve read , you can look down the bore , muzzle end and “SEE” a ring of sorts where the threading ends / shoulders on the barrel on a lot of these rifles I have one but have not spent much time with it ( health issues ) One person , I can’t remember if it was a YouTube video or on a...
  15. 6

    Is there a # of rounds needed for a new 22 to possibily tighten up?

    Might try some eley club , if it prefers eley
See more
Top Bottom
Back
Home
Forums
Merch
Alerts