ZA206
Private
Latest activity Postings Featured content About Feedback Stats
-
-
ZA206 replied to the thread What's the Go-To 223 Brass Now?.IME, with good match prep and annealing, LC, PMC & Winchester are all GTG. LC and PMC are basically interchangable. Winchester does... -
LC is always solid and plentiful i also sell it, full processed, ready to roll if you want a bunch
-
ZA206 replied to the thread Opinions on VV N540 powder for 223/5.56 hand loads?.I'm sending 77 TMK's out of a 20" Bartlein AR at 2830 fps with N540 and SD's around 9 (LC brass) with almost no pressure signs... N540...
-
ZA206 replied to the thread Powder IN-STOCK thread.XBR8208 was $399 at Midsouth yesterday....
-
ZA206 replied to the thread Opinions on VV N540 powder for 223/5.56 hand loads?.LOL.... so I wound up getting 3 jugs (24 lbs) of N540 over the winter and spring (great sales) because I was sure it was going to...
-
ZA206 reacted to straightshooter1's post in the thread Neck Tension Inconsistencies on Lapua 6.5CM Brass with
Like.
Maybe ditch that expander ball and get a ball with a better design? Or better yet, ditch the expander ball all together and expand the... -
ZA206 posted the thread Preffered optics vendors/sponsors here on the forum? in Observation & Sighting Devices.Looking to get a nice spotting scope and new tripod setup. Who are the trusted "go to" guys here on the forum or other websites to get...
-
ZA206 replied to the thread Rifle Competition Events Geissele Gas Gun Series Questions.That looks like so much fun. I just did a 2 day long range class at Coleman’s Creek, this seems right up my alley. Must resist…
-
ZA206 reacted to 3rdfocal's post in the thread Rifle Scopes New for 2025, the Kahles K540i with Like.
I could care less about that last 5% of the image edge. I've used most of the top scopes, spotters, and binos and if I look hard enough...
-
ZA206 replied to the thread Opinions on VV N540 powder for 223/5.56 hand loads?.I wound up finding a pretty hot load with N540, LC brass and Rem 7.5 primers that shoots pretty well. I've got to shoot it a couple more...
-
ZA206 replied to the thread Hornady seating stem for 73 Gr ELDM.I use a Redding seating die with their VLD seating plug for the 73 ELD, never left a mark on one. It WOULD leave seating rings on 77...
-
ZA206 replied to the thread How Relevant is the Nightforce NX8 4-32?.I have four NX8 scopes, one 1-8, one 2.5-20 and two 4-32's all are FFP, FDE and have the Mil-XT reticles and were purchased in the last...
-
ZA206 reacted to 71firebird400's post in the thread How Relevant is the Nightforce NX8 4-32? with Like.
I find the glass in my NX8 4-32 to equal if not beat the glass in my ATACR 7-35. Could be a really good NX8 against a mediocre ATACR, I...
-
ZA206 replied to the thread Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25).Thanks for the info! The only "hot" loads I've found for mine are XBR and the 77 TMK (2750 fps). I'm also close on one using N540 and...
-
ZA206 reacted to Bigjake83's post in the thread Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25) with Like.
Well the SPR barrel is 18" so I'd say you could safely add 48fps, but keep in mind that you have a CLE Chamber. None of mine liked the...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
