• RIX Storm S3 Thermal Imaging Scope WINNER!

    Thank you to everyone who particpated!

    See the winner

Recent content by Bigjake83

  1. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Well the SPR barrel is 18" so I'd say you could safely add 48fps, but keep in mind that you have a CLE Chamber. None of mine liked the Hot loads, my go to load for my CLE load is 77 SMK 23.5gr TAC, LC Brass and BR4 Primers. I would start your load development at 23gr of TAC and work up 24gr it...
  2. Bigjake83

    New Purchase?

    I hear the Jacksonville FL Sheriff's Office love them.
  3. Bigjake83

    New Purchase?

    That's the same design as my Broadsword Builds that I'm using with the Geissele barrels as far as how the Upper and Handguard mate to each other, very solid.
  4. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Hard pass.
  5. Bigjake83

    Gunsmith to make AR barrel

    Craddock does great work as well, but the OP will be waiting for months. Paul Ross is pretty open at the moment.
  6. Bigjake83

    Gunsmith to make AR barrel

    Give Paul Ross a call or text, just tell him I sent you and he'll do you a solid deal. If you're not familiar with Paul Ross he was the Head Barrel Smith at Compass Lake, he worked there for over 20 years. If you've ever read any of my Reviews or Range Reports, Paul has made just about every...
  7. Bigjake83

    Dedicated can for seekins dmr 223?

    I've been very happy with my Dead Air Lazarus 6.
  8. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Load development results are up. 1st Handload Range Trip.
  9. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    Part 4: Load Development and Factory Ammo Testing I've got my first round of Handloads to shoot today along with a good assortment of factory ammo. HANDLOAD COMPONENTS: 77gr SMK RAMSHOT TAC STARLINE BRASS CCI BR4 PRIMERS Good Ejection pattern. 23.6gr TAC 24.2 TAC Didn't realize I...
  10. Bigjake83

    Noveske DDF Barrels

    I'm not going to bomb the OP's thread with my range session so please go to this link to see results. https://www.snipershide.com/shooting/threads/geissele-cut-rifled-spr-build-and-barrel-evaluation-part-3-updated-15mar25.7250369/
  11. Bigjake83

    Noveske DDF Barrels

    🤣... No worries, very fair questions. Yes absolutely Sir, In fact I'm leaving soon to hit the range and I'll be happy to post all the dog shit groups as it happens. I'll give it all to you (No Homo)..the good, the bad and the really ugly.
  12. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    No Sir, no down side at all. I started off with the Keymo Hub and Dead Air Muzzle break Set up and initially I really enjoyed it although it did add on a good amount of weight. As time went on I started noticing that the CAN would come loose off of that last click creating just enough play...
  13. Bigjake83

    I want to build (or maybe buy, if I must) a precision .308 gas gun

    Honestly brother, I'd just pick up a Seekins SP10 and be done with it. They're super easy to swap barrels if you're not happy with or shoot it out.
  14. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    It was the AAC 77gr TMKs, but I'll shoot if again just for you😉 I put the 1/2" red dots I shoot at 100rds on the boxes of ammo that don't work out, it also hated the 69gr AAC SMK's When I take the 18" SPR out for load development I'll shoot every type of factory 5.56/.223 ammo I have on hand...
  15. Bigjake83

    Geissele Cut Rifled SPR Build and Barrel Evaluation. (Part 4 (Load Development 21MAR25)

    I tried some factory 77gr TMKs, it wasn't pretty close to 2 MOA IIRC
See more
Top Bottom
Back
Home
Forums
Merch
Alerts