Recent content by danr

  1. D

    Hornady high speed 3 in 1 case trimmer

  2. D

    Hornady high speed 3 in 1 case trimmer

    Good trimmer and I thought the instructions were good also to get it set up. Issue with mine was that the chamfer cutter will not drop or fit all the way down inside the cutter housing slot. The deburring cutter does and just looked weird. Ideally, you would partially insert the pilot, press...
  3. D

    Hornady high speed 3 in 1 case trimmer

    If you ordered from Midway, you paid way too much. Not only did Graf & Sons have it cheaper at regular price, they had it on sale when I realized it became available. $470
  4. D

    6 ARC powder consensus for heavies in AR

    I need to try LeveRevolution. I was pushing Varget/CFE at max loads (105/107s) that were over pressure in my AR arcs. I had to back the loads off to almost where my Grendel was performing well.
  5. D

    6mm ARC sizing Woes

    🤦🏻‍♂️
  6. D

    6mm ARC sizing Woes

    Not ignoring anyone. This is a great site to help each other figure shit out. At times life decides when we get to chime in.
  7. D

    6mm ARC sizing Woes

    Just saw this. So the solution is to back off on the load and not chase the the published velocities. That’s what I did. Started loading at the higher end and did achieve 2670 fps out of my 22” AR with 105 bthp but accuracy wasn’t acceptable. I pushed pressure enough at that range to find a...
  8. D

    Thoughts on Piston System For Precision Upper...

    Not ideal for accuracy….. Love those SA piston kits. Here’s a pic of what my 20” 6 arc and 20” 556 (top and middle) will do compared to my DI 22” 6 arc. And the only reason the 22” doesn’t have one is SA doesn’t make a .875 piston kit. I know they’re only 3 rd groups but these are to check zero...
  9. D

    XLR folding adapter

    Solid lock up on the adapter I received. Others have commented earlier versions weren’t great but I can’t imagine what more I should expect as this unit has zero play when extended. And as per the instructions I was able to tune the lock up and the swing tension when folding/extending. There is...
  10. D

    XLR folding adapter

    The cheek piece is easily removed along with the butt stock and they do need to be removed as in my case before installing the folding adapter, the handle of my cleaning rod would not clear the cheek piece. My only concern was losing the adjusting wheel which will swing freely once the cheek...
  11. D

    XLR folding adapter

    Finally found one and installed. Pretty freaking nice. Locked in you don’t even know it’s there. And will fit into a 40” soft case now 👍
  12. D

    6mm ARC bolt gun for competition?

    Here’s some results from the first 100ish rounds down the Proof barrel. Very promising. All rounds were loaded on brass fired thru my AR ARCs so I did have a few rounds chamber tight but that was to be expected. Other than that every round fed well from the MDT magazine. This is my first chasis...
  13. D

    XLR folding adapter

    Yep I understand they lock up pretty well. I’m happy with the fixed setup just seems convenient to get the stock out of the way for cleaning. The handle on my cleaning rod won’t clear the cheek piece (adjusted all the way down). Just wanted to hear some thoughts from those who’ve used them. Thanks
  14. D

    XLR folding adapter

    Opinions from users of the xlr push button folding adapter. Thinking of installing one on my envy pro/C6 butt stock to fold it out of the way for cleaning. I did a search but didn’t really find “reviews”. Thanks
  15. D

    6mm ARC bolt gun for competition?

    👍
See more
Top Bottom
Back
Home
Forums
Merch
Alerts