Recent content by JSWM3

  1. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jetmd</div><div class="ubbcode-body">JSWM3, Forgive me for asking, but is your total round count on this rifle 79? Just wanted to know if this problem developed early...
  2. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C. Dixon</div><div class="ubbcode-body">I would strongly, STRONGLY discourage you from installing a Sako extractor in your Remington. Here's why: The Sako is meant for...
  3. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA Bingo Removed the extractor and the bolt now closes as it should. Going to go ahead and order a couple extra from brownells. Finally starting to see the value in the Sako kits now after pulling the factory piece firsthand... Appreciate the...
  4. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA Going to see if I can track down someone locally that would be willing to let me give their bolt a try. Other than that I'm out of ideas.
  5. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA Still no luck with the action removed. Anything else I could be missing here? My only other thoughts would be to have the headspace checked or give Remington a call. <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: my...
  6. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 2156SMK</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JSWM3</div><div class="ubbcode-body">Yes, closes and...
  7. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wilecoyote</div><div class="ubbcode-body">forgive me ,but you're really sure that you don't have some round portion of splitted neck,from some faulty brass,wedged inside...
  8. J

    Gunsmithing Issues chambering round with newer 700 SA

    Re: Issues chambering round with newer 700 SA Yes, closes and cycles freely without a round chambered.
  9. J

    Gunsmithing Issues chambering round with newer 700 SA

    Hey guys, long time lurker first time posting here. Have an issue with a new 700 AAC-SD I picked up last month. I'll try to provide as many specific details as I can about the problem in hopes to move the troubleshooting process along and to get any insight on what my next step might be here...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts