ShtrRdy's latest activity

  • ShtrRdy
    ShtrRdy replied to the thread Target interpretation help..
    I agree with your thoughts. Also, 43.6 to 44.2 seem to have a similar point of impact. It this a 308 Win?
  • ShtrRdy
    ShtrRdy reacted to spife7980's post in the thread Target interpretation help. with Like Like.
    Based on the evidence presented the 44.2-44.8 is where I would look into more like you said
  • ShtrRdy
    ShtrRdy reacted to kaskin's post in the thread Target interpretation help. with Like Like.
    I figured somewhere in the 2600 fps range. Not married to a velocity really. I would like for them group tight and consistent and let...
  • ShtrRdy
    ShtrRdy reacted to Paulyester's post in the thread Reloading Help Needed with Like Like.
    5 shots make up the ES and SD numbers. Since all rounds were essentially the same charge, I'll pull the numbers from my Garmin and give...
  • ShtrRdy
    ShtrRdy replied to the thread ES of 97?.
    I sometimes put cartridges in my pants pocket to keep them warm. Maybe I'll try your suggestion next time. Should get some looks from...
  • ShtrRdy
    ShtrRdy reacted to spife7980's post in the thread ES of 97? with Haha Haha.
    Dirty barrel and a wild powder are my suspicions. How different was you average velocity compared to mays 2919? What if you throw out...
  • ShtrRdy
    ShtrRdy replied to the thread Reloading Help Needed.
    How many rounds fired make up each SD and ES?
  • ShtrRdy
    ShtrRdy replied to the thread ES of 97?.
    Virgin brass could be the problem in a couple different ways. The dimensions on new brass typically do not match your chamber and...
  • ShtrRdy
    ShtrRdy replied to the thread SOLD MPA Matrix Pro. @AN260rem.
    PM sent. Thanks for the nice pictures.
  • ShtrRdy
    ShtrRdy reacted to BigDaddy0381's post in the thread SOLD MPA Matrix Pro. @AN260rem with Love Love.
    I have a matrix pro with very little use. Has 2 alumni grey ops weights, factory mag block swept 3 grip. It's for a Rem 700 footprint...
  • ShtrRdy
    ShtrRdy reacted to Cseib838's post in the thread SOLD Atlas Cal Bipod with Love Love.
    Atlas Cal Gen2 Bipod with Area 419 arca clamp. Bipods in like new condition. $SOLD
  • ShtrRdy
    ShtrRdy reacted to UndFrm's post in the thread Rounds not chambering with Like Like.
    Forster Ultra seating and FL sizing die ( no bushing) I think at this point I'll start from scratch with the sizing of brass. I'll get...
  • ShtrRdy
    ShtrRdy replied to the thread Rounds not chambering.
    How do you measure neck circumference?
  • ShtrRdy
    ShtrRdy reacted to UndFrm's post in the thread Rounds not chambering with Like Like.
    Imperial die wax, the one that comes in a little flat tub. Brass length is 1.541 average. Some brass are +/- 0.001 Haven't trimmed at...
  • ShtrRdy
    ShtrRdy replied to the thread Remington 700 Failure to Fire.
    I have an experiment idea to try. Seat a bullet long in an empty case so that the bolt does the final seating. Then try the trigger...
Show older items
Top Bottom
Back
Home
Forums
Merch
Alerts