Recent content by terrell35744

  1. T

    87 grain VMAX ideal velocity .243

    bang poof lol. I was working the 75 max up in a 26" 6 creed 1-7.5 and was losing 1/3 of the bullets on the way to the 100 targets. 3150 with the 6mm br they where just fine and worked good on coyotes.
  2. T

    87 grain VMAX ideal velocity .243

    I've ran the 87 max in couple 6 creeds but usually with shorter barrels so 3300 fps to 3150 fps with 1-7.5 twist barrels. Works great on coyotes from 50-300 yards. I have shot the 75v max out of 6mm br are they are great too but I did have bullet failure with those out of 6mm creeds 1-7.5 at...
  3. T

    Continuous scope ring slippage

    I have had rings slip before it can be caused by many factors but the easy way to fix it is to bed the rings I included an article from Jim See https://www.longrangehunting.com/articles/precision-scope-mounting-for-the-working-rifle.1227/
  4. T

    Gunsmithing McMillan Fiberglass Stock Repair Work Recommendations

    Think its a pretty easy fix order some pro bed 2000 from Score-high. Get your self back to a flat surface in the mounting area with epoxy. Buy some thread inserts and machine screws that fit the adjustable butt pad. Then drill new holes for the inserts and glue them in. The pro bed will come...
  5. T

    .19 caliber varmint rifles

    If i could get the old .17 cal 30gr woodchuck den gold bullets I would have a .17 rem / .17 tac/ etc in a heart beat. I shot those bullets in a .17 rem back in the day and they where a killing machine.
  6. T

    .19 caliber varmint rifles

    Crazy as it is I do. I have a .19 badger. Fun rifle built on a cz 527 that was a 22 hornet , James built for me. Right now I'm shooting R7 with the 32gr bullets. My daughter took over the rifled I cut the barrel to 17" put a suppressor on and she shoots prairie dogs with it. If you want a 22...
  7. T

    Kelby's Prometheus Action

    If you have an action that is running great I could defiantly use some help. What bottom metal/mag system are you using? If you have a phone/ camera that can shoot slow mo it would help a ton to see an working action so I can get mine running better. Thanks
  8. T

    Kelby's Prometheus Action

    Two piece base high rings nf nxs 3.5-15 x50 It s not the scope. The problem as I talked to the guy in your office is the rounds in the mag are negatively impacting ejection. On the bench you can get the gun to run ok. Best I have seen is like kicking brass 12-18" out of the rifle for sure not...
  9. T

    Kelby's Prometheus Action

    I have 2 nanook (lighter versions ) actions one short action std bolt in 260 and another long action mag in 7mm prc. The short action runs ok ,the ejection is pretty goofy but usually ejects fine. The long action is another story it usually drops the spent case back in the action most of the...
  10. T

    NXS 2.5-10 on a long action?

    So I was going to put one of the 2.5-10 x42 NF on my kelby nanook long action and it would not work with regular rings. https://spuhrwebshop.com/en/hunting/hpc30-25a.html spuhr makes these and I may end up using them. I don't think I would ever do an interrupted rail on a long action ever again...
  11. T

    suppressor cover questions

    I have tab, Armageddon, silencer co and Fehu covers and they all work well to cut mirage. I like the Fehu covers the best they are real light and trim but work just as good as some of the thicker covers. https://www.fehuoutdoors.com/product-page/nomex-heat-shield he's out of stock but when I get...
  12. T

    Official MDT 6BR Magazine Thread

    I have the 10rd new production 6mmbr mag and I trimmed the legs of the follower it helped some but it also seems like the new steel bodies bulge too. The 10th round of the 6br mag and the steel 223 mags both have problems with lips opening and body bulging to the point they are tight in the mag...
  13. T

    Want to rent a 223ai reamer

    I would just order one. Story goes like this I had a barrel put on by a gunsmith it worked great then I sent the rifle back for another one same cartage with the original paperwork and description from the last barrel. Get the new one and its not like at all what I wanted kind of got the tuff...
  14. T

    Hunting & Fishing Fly rod help

    4wt 8'6" is a good pick for the brushy creeks and high mountain valleys steams you are on the right track. Even though the different between 9'and 8'6" doesn't seem like much it way more maneuverable and the 4 wt will punch the wind that is always in the mountains way better then something like...
  15. T

    Hunting & Fishing Fly rod help

    the douglas dxf are good rods too I used a 6 wt for a weekend they work good enough lol... You could call yellowstone, Los Pinos here in Albuquerque, reds fly shop or any other good fly shop tell them that you were recommended a hardy shadow and see what the new hotness is for a rod like it. I...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts