Recent content by Wade

  1. W

    lets see your foundation stock

    Yours is the Impact specific cut. NiteQwill has the generic 700 clone cut.
  2. W

    lets see your foundation stock

    We have built and shot quite a few rifles on the Revelation, Gideon, and some on the newer Ezekiel. They all feel really good, but the Revelation is pretty heavy for a hunting rifle. Here's my 22 arc in the Ezekiel.
  3. W

    Gunsmithing The No-Go Gauge Went

    Edited: I'd try another set of gauges first if you can borrow them.
  4. W

    Steiner S432 Add-ons

    I have and use an S332. The Mlok attachments on mine aren't suitable for mounting anything that needs to hold zero. They are held on by a single tiny screw.
  5. W

    Shorty 223AI Issues - Help

    With multiple guns and multiole loads, that appears to be the only common denominator. I'd clean the barrels well and just shoot some known good factory 223 rem ammo in them to set some kind of baseline.
  6. W

    Shorty 223AI Issues - Help

    Are you running the same dies to load for both?
  7. W

    Why don't any 1.7 scope mounts have cant?

    I'd just grind some off the bottom of the cap.
  8. W

    SOLD Gideon/Revelation From Foundation

    I sent you a PM.
  9. W

    Continuous scope ring slippage

    Regardless of brand of scope or rings, the first thing I'd confirm is that the ring caps are not contacting the ring bottom halves when torqued.
  10. W

    Night Vision ? About adding a piece of pic rail to a Unity Tactical CMT mount

    I use a CTM for some setups with my Voodoo S and like it. The plate screw spacing is wide enough that you'd either need a picatinny with a wider than normal base if you wanted to use the existing holes to attach. Screw spacing is about .85ish wide for both the Voodoo and Skeet style. Optical...
  11. W

    Retical considerations

    Most of reticle selection is personal preference based upon experience. The truth is that it's the shooter way more than any reticle that matters. I'd recommend buying a used, high quality FFP scope here. You can then develop your own experience to choose to stay with what you have or move...
  12. W

    Razor G3 and Spuhr 4002

    Just shim between the housing and the wedge with something flat.
  13. W

    22arc versus 6 arc

    I've run an 18" 6 arc for a couple of years and added an 18" 22 arc this year. In my experience, the bullet choice makes about as much difference as the cartridge. Both have been very accurate and forgiving. I have mostly run 103 ELD-X in the 6 and 75 ELD-M in the .22. I like the .22 as a...
  14. W

    Euro Optics customer service,

    I'm not sure what happened about a month ago, but it must have caused over half the nation to worry a little less about sliding off into the financial abyss. I am sure they are just slammed.
  15. W

    Accessories Lots of SPUHR rings and mounts

    I'll take the 4000 rings.