Accessories MDT ACC Thumb Rest

WolfThorn · Apr 25, 2023

Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

J_D · Apr 25, 2023

I’ll try a right handed version. PM details.

EmanP · Apr 25, 2023

I got one this weekend from him at the ID hunter match and installed it last night. They look and feel great! I'll try it out this weekend at the RTC Karstetter match and see how well it holds up to 2 days of hiking in the hills with the double sided tape.

WolfThorn · Apr 25, 2023

EmanP said:
I got one this weekend from him at the ID hunter match and installed it last night. They look and feel great! I'll try it out this weekend at the RTC Karstetter match and see how well it holds up to 2 days of hiking in the hills with the double sided tape.

View attachment 8127948 View attachment 8127949 View attachment 8127950 View attachment 8127951 View attachment 8127952

Hope you like it! Thanks for adding the pictures, I always forget to take them. Lol

ultimatepredator · Apr 26, 2023

PM Sent
Payment sent

WolfThorn · Apr 27, 2023

There has been some confusion on installation methods. Tapping your chassis is not required, its an alternative method. The provided double sided tape does its job very well.

jeff.schulz12345 · Apr 27, 2023

Bump for a great product. I have one of the thumb shelves that we trimmed down and made work with a KRG W3 chassis, and it works great.

Bubba_crx · Apr 28, 2023

Love how mine feels, excited to test it out in match conditions.

WolfThorn · Apr 30, 2023

Wabowman · Apr 30, 2023

I have these on both my chassis. Love it!
I did tap my chassis.

Loe · Apr 30, 2023

The double sided tape holds up very well under any condition as long as you be sure to clean the surface areas and apply in a room temperature environment. Drilling and taping the chassis is very simple for those who have the means. 1/4” deep pilot hole then tap to 10/24 to accommodate the supplied screw. You can use the tape to line everything up then center punch the chassis through the hole in the thumbshelf.

Billy.the.kid · May 1, 2023

looks nice!

RALA · May 1, 2023

I'll take a right hand model. PM sent

WolfThorn · May 2, 2023

Schütze · May 11, 2023

I installed 3 off these (just glued for now) on my acc’s, great product!
Holding up fine on one range trip so far, plan is if one comes loose I drill / tap all.

J_D · May 11, 2023

I installed one on my match rifle. Works great

WolfThorn · May 11, 2023

Good to hear they are working out!

WolfThorn · May 11, 2023

Schütze said:
I installed 3 off these (just glued for now) on my acc’s, great product!
Holding up fine on one range trip so far, plan is if one comes loose I drill / tap all.

Did you use glue or the provided double sided tape?

Altoonabcm157 · May 11, 2023

Overall happy with mine, I will be drilling and tapping the chassis since the tape seems to work fine but kinda gives alittle bit if you put pressure on it. Doesn’t move around but for lack of better description makes it flex under pressure. The screw should resolve that fully

Schütze · May 11, 2023

WolfThorn said:
Did you use glue or the provided double sided tape?

The tape you supplied

Mike Casselton · May 11, 2023

Installed mine this morning with the supplied tape. I don't think it's going anywhere.

Me likey.

Familydude · May 11, 2023

PM’d for two lefties.

Bubba_crx · May 11, 2023

Shot a match with mine last weekend, and loved it. Feels much better. I used the supplied tape and it’s mounted on there solid.

Rocklong · May 11, 2023

Any chance you could make these for the xlr element 4.0?

WolfThorn · May 11, 2023

Rocklong said:
Any chance you could make these for the xlr element 4.0?

Absolutely! I will be in touch.

Electric B · May 11, 2023

Altoonabcm157 · May 16, 2023

Just to update I took the time to drill and tap my chassis today. Although it’s probably not necessary it did make the shelf rock solid and I prefer it like this. Great little product.

hancockbs · May 28, 2023

PM sent.

Ucsdryder · May 28, 2023

WolfThorn said:
Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

Can you make one for the xlr ?

WolfThorn · May 28, 2023

Ucsdryder said:
Can you make one for the xlr ?

Currently working on a version for the XLR. PM me and I can get back to you when I am done.

chelton1988 · May 30, 2023

Pm info on a rh and payment

Sil17sd · Jun 2, 2023

PM’d for payment details

DamonP · Jun 4, 2023

I Would like to purchase a thumb rest extension

wvlapua · Jun 4, 2023

Pm inbound

WolfThorn · Jul 4, 2023

New batch printed! Left and Rights available.

To those who were looking for an XLR version, I am getting close.

Familydude · Jul 5, 2023

Used my lh version in a match this weekend. Worked great. Went with the tape. I’ll drill and tap if needed, but good so far!

chelton1988 · Jul 5, 2023

Used my rh this weekend for first time I tore it off half way through the day. Will try taping again. It was in the pouring rain and very humid. Probably didn't get it clean enough. No negativity here I loved the fit and feel through the first 4-5 stages.

lai345 · Jul 5, 2023

WolfThorn · Jul 9, 2023

WolfThorn · Jul 12, 2023

srdowney · Jul 15, 2023

ohhowtheturntables · Jul 19, 2023

10/10 product and easy to instal

WolfThorn · Aug 13, 2023

Fresh batch off the printer, plenty to go around!

Rocklong · Aug 13, 2023

Xlr element?

WolfThorn · Aug 14, 2023

Rocklong said:
Xlr element?

I need to model one up really bad! Have not had a chance to get my hands on a chassis to do so. Soon though as I have ordered one.

rijndael · Sep 26, 2023

I gotta say, this was a great add-on. I'm used to rougher 3D printed parts, but this one was very well done. I should have ordered 2.

Eddie1990 · Oct 21, 2023

WolfThorn said:
Selling 3D printed thumb rests for the MDT ACC. Printed out of PETG, which has great chemical and impact resistant properties.

Attachment to Chassis:
- Option 1: Using the provided double sided tape (Preferred method)
- Option 2: Remove plug that provides accommodations for a 10-24 screw (Requires tapping your chassis and recommend using double sided tape as well)

Whats Included:
- Left hand, right hand or both versions of the thumb rest. (Please Specify when messaging me)
- x2 double sided tape
- x1 10-24 screw
- Alcohol prep pad

$25/shipped

Hi there

I really like your 3D print thumb rest.
I would like to order 3x left hand thumb rest unsure if you‘ll be able to ship to Australia

IamAxel · Oct 22, 2023

John_S · Dec 7, 2023

New to the forum and would love to buy a right handed thumb rest.

64E · Dec 30, 2023

I’ll take one please. Right handed version.

Having trouble using the site?

You Should Now Be Receiving Emails!

Accessories MDT ACC Thumb Rest

Supporter

Attachments

Supporter

Private

Supporter

Private

Supporter

Supporter

Attachments

Sergeant of the Hide

Supporter

Supporter

Attachments

Old but New

Attachments

Supporter

Private

Supporter

Major Hide Member

Supporter

Supporter

Supporter

Sergeant of the Hide

Major Hide Member

No, I just wear the T-shirt

Spending my kids’ paltry inheritance on hobbies

Sergeant of the Hide

Supporter

Supporter

Private

Sergeant of the Hide

Private

Private

Supporter

Helton ky

ROOKIE

Private

Sergeant

Supporter

Spending my kids’ paltry inheritance on hobbies

Helton ky

Private

Supporter

Supporter

Sergeant of the Hide

Private

Supporter

Supporter

Supporter

Major Hide Member

Private

Private

Private

Private

Similar threads