-
Having trouble using the site?
Contact support
It's a Christensen Arms MPR rifle. The MPR rifle comes in that chassis from the factory. But you can also buy just the chassis from Brownells if you have a Remington 700 or a rifle that uses a Remington 700 footprint.
CHRISTENSEN ARMS Modern Precision Short Action 14" CF Handguard Chassis Black SKU: 430102918 | Brownells
Check out the CHRISTENSEN ARMS Modern Precision Short Action 14" CF Handguard Chassis Black SKU: 430102918 available Online at Brownells Today and many more Rifle Stocks & Parts products are available in our Gun Parts Department.
www.brownells.com
CHRISTENSEN ARMS Modern Precision Long Action 17" CF Handguard Chassis Black SKU: 430102924 | Brownells
Check out the CHRISTENSEN ARMS Modern Precision Long Action 17" CF Handguard Chassis Black SKU: 430102924 available Online at Brownells Today and many more Rifle Stocks & Parts products are available in our Gun Parts Department.
www.brownells.com
Something special
DSR-1 and Hensoldt ZF 3.5-26
DSR-1 and Hensoldt ZF 3.5-26
Nice rig. How does it shoot? It looks like the solas chassis too?
It is indeed the 17" Solus chassis. I haven't made it out to the range yet, hopefully soon.
Impact 737r in 6GT
26" Proof Comp
ZCO 5x27 Impact 2
ARC M-brace
XLR Envy Pro
TT Special two stage flat
ACE Brake
Send It Level
Ckye Pod Standard lenght
-Ultimatum Deadline² .308
-TriggerTech Special Two-Stage Trigger
-IBI Barrel & Three Gill Brake
-MDT ACC Elite Chassis
-Burris XTR III 3.5-18x
-TriggerTech Special Two-Stage Trigger
-IBI Barrel & Three Gill Brake
-MDT ACC Elite Chassis
-Burris XTR III 3.5-18x
Last edited:
BAT Bumblebee action
Manners LRH stock
Krieger 20” REM Varmint
Hawkins bottom metal and rings
Triggertech Diamond
Zeiss LRP S5 3x18
Also a switch barrel with 28” 6BR
built by Joe Walls of Wall’s Rifles
Manners LRH stock
Krieger 20” REM Varmint
Hawkins bottom metal and rings
Triggertech Diamond
Zeiss LRP S5 3x18
Also a switch barrel with 28” 6BR
built by Joe Walls of Wall’s Rifles
Last edited:
Hello!
I’m brand new to long range shooting.
I just picked this up nearly new from a friend and will be going down the rabbit hole a bit.
Tikka T3x CTR action and 20” barrel in 6.5 Creedmoor.
MDT XRS chassis
MDT Elite muzzle brake
Arken SH-4 6-24x50 (came with rifle) and rings
Accu-tac BR-4 G2 ARCA bipod
Cheap Amazon arca rail. Waiting for the backordered MDT enclosed rail for the XRS.
I’m brand new to long range shooting.
I just picked this up nearly new from a friend and will be going down the rabbit hole a bit.
Tikka T3x CTR action and 20” barrel in 6.5 Creedmoor.
MDT XRS chassis
MDT Elite muzzle brake
Arken SH-4 6-24x50 (came with rifle) and rings
Accu-tac BR-4 G2 ARCA bipod
Cheap Amazon arca rail. Waiting for the backordered MDT enclosed rail for the XRS.
Attachments
Last edited:
Nothing too crazy here, a pretty budget build as far as these things go I guess, except that I did something different with the brake. I wanted the option of a big fat brake on this one, but also wanted the ability to use a suppressor with the same QD mount I make for all my other rifles. So I did both; the brake is two pieces with a removable outer shell, all machined from 17-4 PH and salt bath heat treated to H900 which gives it the bronze color. The felt recoil is what you'd expect - significantly less than a common 223 Rem.
Rifle is a Ruger American action (started as a budget rifle for my son in 243 Win)
1:7 twist 26" Schneider MTU profile barrel from the classifieds that I chambered in 6 GT, shouldered instead of barrel nut due to the diameter
MDT XRS stock
Burris XTR II which I'm not real fond of
Shooting 112gr MB @ 2920
Still working on a more solid bipod setup, machining a spigot mount built into the forend.
Rifle is a Ruger American action (started as a budget rifle for my son in 243 Win)
1:7 twist 26" Schneider MTU profile barrel from the classifieds that I chambered in 6 GT, shouldered instead of barrel nut due to the diameter
MDT XRS stock
Burris XTR II which I'm not real fond of
Shooting 112gr MB @ 2920
Still working on a more solid bipod setup, machining a spigot mount built into the forend.
First 22arc to leave the shop.
Mac Bros Evo II action
Proof Carbon 16.5" barrel
MDT HNT26 Chassis
Hornady 88eldm factory ammo
Weight (not including suppressor)
No optic: sub 6lbs
W/ZCO 420: 8lbs
W/MK 5 3-18: 7lbs
Mac Bros Evo II action
Proof Carbon 16.5" barrel
MDT HNT26 Chassis
Hornady 88eldm factory ammo
Weight (not including suppressor)
No optic: sub 6lbs
W/ZCO 420: 8lbs
W/MK 5 3-18: 7lbs
I spy an OCL Polonium-K on there...Shoots pretty damn good, too.
Good eye. I believe this is the first OCL we have tried. The target was without the can proofing rifle before customer pickup. The can turned it into a mere mortal .5 rifle.
I got to know the owner of OCL through IG (he's on here, his username is @AndrewKing ), and I helped do some pre-production T&R for them when they were getting ready to release the Hydrogen series. I've currently got a Hydro-S 7.62, Hydro-S 6.5mm, Hydro-L 7.62, and a full-size Polo. After thousands of rounds through them, I can highly recommend their cans. They are precision cans, as well, and did not affect group sizes on anything I've put them on. I highly recommend them.
My .223 trainer. All metalwork was done by Matt Stewart of Stewart Rifles.
-Trued 700 SA, opened to 8-40, Gre-Tan F/P assy.
- Krieger 1:7 HV, 26", chambered in .223 Wylde.
- Hawkins M5 DBM
- TT Primary at 2.5lbs
- Bedded into a McM A4
- Seekins rings and base
- Trijicon Tenmile 4.5-30x56
Only factory ammo I tried was Sierra with the 77gr SMK during break-in...it averaged ~half-MOA. I put (20) random 5 round groups downrange just playing with bullets and powder and 19 of them were sub-minute with a few that I'll be exploring further.
Bergara B14 Premier Elite
Was told to expect 10-12 Weeks for delivery as i placed my order.
4 Weeks later on the exact same day, i got a mail which said, your Rifle will be here next week.
Bergara B14 Premier Action
Bergara Barrel Contour No 7 ( Should be a MTU or very close) 26" long, 1:8 Twist in 6.5 Creed
MDT ACC Elite Chassis
Trigger Tech Diamond
Comes like that from the Factory
Already added a Area 419 Brake, Green Jellys and the Mlok Bag Rider
Not sure yet, which scope i will add
Thinkin something like Element Theos, Zeiss LRP S3 6-36, --- ?
A perfect scope would be the 6-36 S&B with 0.05 MIl Clicks, but damn, that scope is expensive
Was told to expect 10-12 Weeks for delivery as i placed my order.
4 Weeks later on the exact same day, i got a mail which said, your Rifle will be here next week.
Bergara B14 Premier Action
Bergara Barrel Contour No 7 ( Should be a MTU or very close) 26" long, 1:8 Twist in 6.5 Creed
MDT ACC Elite Chassis
Trigger Tech Diamond
Comes like that from the Factory
Already added a Area 419 Brake, Green Jellys and the Mlok Bag Rider
Not sure yet, which scope i will add
Thinkin something like Element Theos, Zeiss LRP S3 6-36, --- ?
A perfect scope would be the 6-36 S&B with 0.05 MIl Clicks, but damn, that scope is expensive
Last edited:
That is one heck of a handsome rifle for a trainer! McWoody, If I'm not mistaken?
Close enough...McWalnut.
*Edited...I guess they call it "molded in timber, walnut" now.
Just picked up my new hunting rifle and by far the nicest rifle I own from a fellow hide member. Hoping all of you guys had as great of a Christmas as my boy and I had shooting today!
- He's 9 and just got a Savage Rascal and scope setup today!
- He's 9 and just got a Savage Rascal and scope setup today!
Attachments
That's really cool.
Do you have any other pics of this? How does the larger brake index? Is it retained with an allen screw or are those threads on the minor brake?
installed a titanium fluted bolt shroud, Timney 2 stage trigger, magazine release extender, and a bolt handle and knob. All from Anarchy Outdoors. Waiting on new barrel from Southeastern Rifle.
How that CDG working out on the Lapua? Smooth cycling?
I’m about to pull the trigger on a .300 Norma CDG I’m just apprehensive about the whole feeding/conical breech…blah blah blah.
Tell me she’s solid.
No allen screws or other fasteners; it uses the QD mount system I came up with for my own rifles and suppressors. Basically just an interrupted thread system, so it tightens down like a normal threaded attachment but can be removed by turning 1/6 turn (one wrench flat) and sliding it off. My suppressors mount on the rifle the same way. It's fast to install or remove, and doesn't loosen while firing; downside is the system doesn't lend itself well to mass production but is good for a one-off approach like small shop work often is.
Semi embarrassed to say not even shot yet-- combo of busy holidays, weather, & non-ease of decent ammo aquisition here in Mass. Still gathering reloading equipment, let alone finding mag primers.
I was actually initially considering the 338NM but after a talk w StraightJacket I decided to go w LM due to the standardization and likely equal or better performance. The conical breech is borderline for 300. SJA put a slight dome on mine, and I have no worries. I can say the CDG is machined extrememly well and feels great; even the gun shop commented on it.
Ill post results as soon as I run it a little.
Howdy guys,
I finally got my rifle finished, setup, painted the way I like it; it shoots like a dream and is a hammer.
Rifle Build:
ARC Nucleus Gen 2
LRI / K&P Barrel - 18” .308 M24 Profile Threaded 5/8x24
KRG Whiskey-3 Gen 6 - Folding Chassis
TriggerTech Special Two-Stage Trigger
Thunder Beast Bipod with Claw Feet and RRS ARCA Adapter
Area419 Hellfire Adapter
SilencerCo Scythe TI Suppressor with Area419 Titanium Suppressor Hellfire Adapter
Liberty’s Defense Suppressor Cover - Tan
Optics & Mounted Accessories:
Kahles K525i - Left Side Windage - SKMR 4 Reticle
Spuhr SP-4003b - 34mm 1.5” 0MOA & Spuhr A-0029 Diving Board (See notes below)
Vortex Impact 4000 WMLRF
MDT Send It Level with Spuhr Mount (See notes below)
*The Spuhr SP-4003b is important in this instance when your goal is to mount a WMLRF on a diving board atop the front ring. A parallax spinner is almost mandatory with the Kahles optics and will strike the rings/diving board if there’s not enough space between the rings. I also tried the Spuhr A-0019d low-profile diving board and while it barely cleared the objective bell of my Kahles optic, the Vortex Impact 4000 WMLRF sat too low and was slightly obstructed by my elevation turret when behind the rifle; I liked the position of the WMLRF when mounted to the Spuhr A-0029 Diving Board.
*The MDT Send It had to be inverted to prevent obscuring my left-side windage turret.
I finally got my rifle finished, setup, painted the way I like it; it shoots like a dream and is a hammer.
Rifle Build:
ARC Nucleus Gen 2
LRI / K&P Barrel - 18” .308 M24 Profile Threaded 5/8x24
KRG Whiskey-3 Gen 6 - Folding Chassis
TriggerTech Special Two-Stage Trigger
Thunder Beast Bipod with Claw Feet and RRS ARCA Adapter
Area419 Hellfire Adapter
SilencerCo Scythe TI Suppressor with Area419 Titanium Suppressor Hellfire Adapter
Liberty’s Defense Suppressor Cover - Tan
Optics & Mounted Accessories:
Kahles K525i - Left Side Windage - SKMR 4 Reticle
Spuhr SP-4003b - 34mm 1.5” 0MOA & Spuhr A-0029 Diving Board (See notes below)
Vortex Impact 4000 WMLRF
MDT Send It Level with Spuhr Mount (See notes below)
*The Spuhr SP-4003b is important in this instance when your goal is to mount a WMLRF on a diving board atop the front ring. A parallax spinner is almost mandatory with the Kahles optics and will strike the rings/diving board if there’s not enough space between the rings. I also tried the Spuhr A-0019d low-profile diving board and while it barely cleared the objective bell of my Kahles optic, the Vortex Impact 4000 WMLRF sat too low and was slightly obstructed by my elevation turret when behind the rifle; I liked the position of the WMLRF when mounted to the Spuhr A-0029 Diving Board.
*The MDT Send It had to be inverted to prevent obscuring my left-side windage turret.
It isn’t specifically designed for the KRG Chassis, it just fits nicely. It’s a Battle Board Tactical Armband; I keep my range card and such in there.
It’s very nice and extremely lightweight, to the point I question how it could handle the rounds it is rated for with no barrel restrictions. The single-port brake does a nice job, but I may try putting the Omega 300 3-port brake on there and see how it does for fun. Since it is all titanium, it does heat up very quickly; it absolutely needs a suppressor cover for mirage control for PRS/NRL Hunter type of stuff where there will be strings of fire. For hunting where you only need one or two shots, it would be great without it. It has a nice tone and really does a nice job for its size.
Excellent, I have one on order at my local shop and am looking forward to it. I appreciate your response and advice on the mirage cover.
Cheers!
MDT ACC Elite Chassis w/ Internal Weights & Rubber Dampeners
Ultimatum Deadline SA
International Barrels 6.5CM 26“ Heavy Profile
TriggerTech Diamond 2 Stage
MDT Elite Muzzel Break
Minox 5-25 LR
Spuhr SP-4601
Ultimatum Deadline SA
International Barrels 6.5CM 26“ Heavy Profile
TriggerTech Diamond 2 Stage
MDT Elite Muzzel Break
Minox 5-25 LR
Spuhr SP-4601
Last edited:
My precision hunters top .308 bottom .300 PRC.
PRC is
defiance
Proof Sendero 1:8 chambered by WAR
20moa rail
Arc 35 rings
Hs Stock I got bored and painted
Hs bottom metal
KRG C-4 with factory 24" SS Tikka T3 Varmint .260 Remigton.
Handloaded 139gr Lapua Scenar & Vihtavuori N444 44gr.
4-shot 0.15 MOA, the fifth i was not able to hold my nervs
I saw the 4 went in to a same hole, i was so stoked, so the last was pull or something.
5-shot´s at 100-meters.
Handloaded 139gr Lapua Scenar & Vihtavuori N444 44gr.
4-shot 0.15 MOA, the fifth i was not able to hold my nervs
I saw the 4 went in to a same hole, i was so stoked, so the last was pull or something.
5-shot´s at 100-meters.
Yes there is.. it’s a strain out of Chitre Panama… wait that’s a different kinda powder
Last edited:
This one was an MPA hybrid hunter in 6.5
Traded the original chassis here on the hide for the Mesa on above post with the .308.. put it in a Christensen MPR chassis.. hated the handgaurd so ran it through the table saw and miter saw.. like how it turned out and is a pretty practical hunting rig.
Rebarreled to 20 inches
- Terminus Zeus Long Action
- 20", 1:8t, AW2 Chamber 300 PRC by Short Action Customs running 205 grain Badlands SBD2's in ADG Brass
- Manners PH mini chassis stock, all hardware swapped for Titanium
- Triggertech Special
- Hawkins Bottom Metal with Wyatts 300 PRC internal box
- Schmidt & Bender PMII US 3-20
- Spuhr Rings with all Titanium hardware I cut on my lathe
- Rugged Ridge Outdoor Bipod
- Liberty Precision Machine Anthem S mounted on a TBAC 2 port brake
- Terminus Zeus Long Action
- 20", 1:8t, AW2 Chamber 300 PRC by Short Action Customs running 205 grain Badlands SBD2's in ADG Brass
- Manners PH mini chassis stock, all hardware swapped for Titanium
- Triggertech Special
- Hawkins Bottom Metal with Wyatts 300 PRC internal box
- Schmidt & Bender PMII US 3-20
- Spuhr Rings with all Titanium hardware I cut on my lathe
- Rugged Ridge Outdoor Bipod
- Liberty Precision Machine Anthem S mounted on a TBAC 2 port brake
Last edited:
