Zermatt Arms is pleased to announce the newest addition to our product line, the Matterhorn rifle chassis!
The MatterhornTM is Zermatt Arms’ vision of a modern-day rifle chassis mixed with elements of a traditional rifle stock. It features an all-aluminum frame dampened with a high-density phenolic material that absorbs unwanted vibration while providing the timeless look and elegance that only high-quality hardwoods can provide. The MatterhornTM also offers a tremendous amount of adjustability to suit the needs of a wide variety of shooters using products with the Remington 700 footprint.
The MatterhornTM will be available for purchase HERE Wednesday, May 22nd for $2150 in a short action, Remington 700 inlet. It will be offered for both right- and left-handed shooters and carries the following features:
As previously mentioned, the MatterhornTM will be available for purchase HERE on Wednesday, May 22nd for $2150. We have a limited number of complete chassis ready to ship and will begin that process the week after Memorial Day.
www.zermattarms.com
The MatterhornTM is Zermatt Arms’ vision of a modern-day rifle chassis mixed with elements of a traditional rifle stock. It features an all-aluminum frame dampened with a high-density phenolic material that absorbs unwanted vibration while providing the timeless look and elegance that only high-quality hardwoods can provide. The MatterhornTM also offers a tremendous amount of adjustability to suit the needs of a wide variety of shooters using products with the Remington 700 footprint.
The MatterhornTM will be available for purchase HERE Wednesday, May 22nd for $2150 in a short action, Remington 700 inlet. It will be offered for both right- and left-handed shooters and carries the following features:
- Full length Arca fore end
- M-LOK accessory rails
- Adjustable magazine catch
- QD cups on fore end and buttstock
- Vertical and swept grip options
- (4) sizes of grip base plates (swept grips only, vertical grip uses flush base plate)
- Adjustable length of pull
- Height adjustable cheek comb
- Laterally adjustable cheek comb
- 100% captive action screws
- All stainless-steel fasteners (with exception of action screws, nitride carbon steel)
- Troughs around action screws and a recoil lug dam for bedding compound
- Base chassis: 6061 Aluminum
- Anodized chassis base (grey and black options)
- Wooden composite fore end dampening panels, cheek piece, grips and accents (options for colors available)
- Base weight: 6.75 lbs
- Fully kitted (maximum possible) weight: 12.25 lbs
- Additional weight options:
- Fore end: up to 22 ounces in 2.8 ounce increments (fasteners included)
- Butt stock: 28 ounces (fasteners included)
- External: 3 options available
- Standard: 4.05 ounces each (fasteners included), up to 8 per chassis. Best paired with two small external weights OR one flush cup external weight and one small exterior weight OR two flush cup external weights.
- Small: 2.66 ounces each (fasteners included), up to 14 per chassis
- Flush cup: 2.75 ounces each (fasteners included), 1 or 2 pcs per chassis, same size as “small” external weight
- External combination weight:
- 8 standard and 2 small: 37.7 ounces (2.4 pounds)
- 8 standard and 2 flush cup: 37.9 ounces (2.4 pounds)
- 8 standard, 1 small and 1 flush cup: 37.8 ounces (2.4 pounds)
- 14 small: 37.2 ounces (2.3 pounds)
- Fore end width (without weights): 2.345”
- Overall length (as sold with two LOP spacers): 34.750”
- Minimum LOP: 13.25” – 13.375” (dependent on trigger shoe)
- Length of pull spacers available in ¼” increments
- Fore end length (from end of chassis to back of recoil lug): 14.125”
- Maximum barrel diameter: 1.250”
- Fore end depth from centerline: 1.500”
As previously mentioned, the MatterhornTM will be available for purchase HERE on Wednesday, May 22nd for $2150. We have a limited number of complete chassis ready to ship and will begin that process the week after Memorial Day.
www.zermattarms.com
