-
Having trouble using the site?
Post any issues in the thread below or reach out directly to support!
Contact support
Vudoo Magazine
- Thread starter Oodie
- Start date
A few others as well.......not sure why it's taking so long, since its been over 2 SHOT shows now.
What improvement is expected? Unless they work much better being pushed into a barricade, etc. I'll stick w/ my poly mags that work 99.9% when loaded correctly. I only have issues when pressure is placed forcing the mag to tilt back. And I've been told that the soft side of velcro, of all material, placed on the backside cures most of those issues.
That is an issue in almost every .22 mag has as you are shoving a small bullet into a small chamber and not much room for misalignment. Put a little pressure on the mag and misalignment happens. Add in the stocks/chassis made for centerfires and it can be an issue and why most use mag blockers so the bags don't touch the magazine at all.
They are supposed to be adding an adjustable mag height adjustment so people can get proper feeding in bottom metal or chassis without adjustable mag catches. Also higher mag capacity than 10.
They went the route of RimX mags to prevent rim lock. They also relieved the front of the mag to reduce the possibility of bags touching the mags. Last update stated the 10 rounder works well and the 15 rounder works well as a 12 round mag.
Haven't heard anything about a timeline. If they're dropping anytime soon, I'd imagine they'll be at the NRL finale
Talked with Greg Roman at the NRA show in Dallas...
He expects the new magazine to be available by late summer.
He expects the new magazine to be available by late summer.
With everything going on at Vudoo I wouldn’t hold your breath any more on those mags lol.
Just go L3i
Just go L3i
I'm sure they still working on it but there's others coming out as well. Last year when they were having issues they contacted an engineering company who was able to make the mag run great but couldn't come together on commercial terms.
The L3I Elite mag (Molded not printed) is being used by some serious top level shooters including some of the official team vudoo shooters.
I added Anarchy followers to my Vudoo mags that already had JKL extensions on them. Instant 15 round mag that feeds flawless.
https://jklprecision.com/product-category/vudoo/
https://jklprecision.com/product-category/vudoo/
I’ve been using one for a little over a year. I had to do some tuning to make it run reliably but once I did its been running good.
Leon’s L3i mags are legit. I had all kinds of issues feeding eley with my Vudoo mags, every magazine I have from Leon work flawlessly and everyone I have turned to them, have had similar success.
No Sponsor
No Sponsor products attempt to offer useful products for shooters at low prices. Shooting sports are getting more and more expensive, and we try to help shooters save money where possible, without sacrificing quality. [email protected] _______________________________ No Sponsor tente...
gongjoe.com
yessssss thank youNo Sponsor
No Sponsor products attempt to offer useful products for shooters at low prices. Shooting sports are getting more and more expensive, and we try to help shooters save money where possible, without sacrificing quality. [email protected] _______________________________ No Sponsor tente...
totally worth it. adjust feed height, solid, no rattle. can be a little tight in many mag wells..... one takes me pulling it out of the AICS chassis, but i dont care... im not a tactical 22lr operator "mags must drop free" guy.... so it doesnt matter.
they are awesome. worth every penny.
Last edited:
Stumbled across this last week
Never seen those before but they don't state how many round capacity and made in Canada and appears not able to ship to the states?
I just assumed it was a 10rd. Oh ya I am Canadian so not a problem for me, probably some ATF regulation that stops the import.
Like a dream! We had to change a bunch of small things but we've got it down now!
Coming this summer, in production now and we think it will take around 6 weeks to make the full batch.
It'll be in line with other 15rd billet mags/extensions or centerfire billet mags.
Well I sure hope it’s not “in line” with the main billet adjustable center fire magazine. Lol
A rimx mag with extension is 180. It'll be up to that level of quality but hopefully we can be a little more competitive since we have a pretty small overhead.
