Selling my right handed bolt guns due to an eye injury and needing to switch to shooting wrong handed.
Prefer money order or check (won't ship until check clears). Your FFL will need to accept transfers from individuals.
Action: GAP 7000 (Lawton) nitrided
Barrel: 22" Proof 1:8 (roughly 800 rounds through it)
Stock: Manners T3
Bottom Metal: Badger M5 DBM
Brake: Insite Arms Heathen Lite
Trigger: Timney
This rifle started life as a GAP build and was rebarreled, nitrided, restocked, and cerakoted by RW Snyder into a lighter more hunting oriented rig. Bare rifle weighs 8.7 lbs. I've only put the 195gr TMK browning and 175gr terminal ascent factory ammo through it and it will shoot both under a Minute for 10 shots. Rifle has been hunted with alot and has some scuff marks on the stock from rubbing while being carried and some safe rash.
Edit: I have had a few offers on the barreled action. The GAP 7000 action has 1/4" more tennon length than a remington 700 and pushed the recoil lug forward by that amount. It will not drop into a standard rem 700 inlet without modification, and the stock would not work on a different action.
Prefer money order or check (won't ship until check clears). Your FFL will need to accept transfers from individuals.
SOLD shipped (lower 48)Action: GAP 7000 (Lawton) nitrided
Barrel: 22" Proof 1:8 (roughly 800 rounds through it)
Stock: Manners T3
Bottom Metal: Badger M5 DBM
Brake: Insite Arms Heathen Lite
Trigger: Timney
This rifle started life as a GAP build and was rebarreled, nitrided, restocked, and cerakoted by RW Snyder into a lighter more hunting oriented rig. Bare rifle weighs 8.7 lbs. I've only put the 195gr TMK browning and 175gr terminal ascent factory ammo through it and it will shoot both under a Minute for 10 shots. Rifle has been hunted with alot and has some scuff marks on the stock from rubbing while being carried and some safe rash.
Edit: I have had a few offers on the barreled action. The GAP 7000 action has 1/4" more tennon length than a remington 700 and pushed the recoil lug forward by that amount. It will not drop into a standard rem 700 inlet without modification, and the stock would not work on a different action.
Last edited:
