Trigger selection questions.

dcmdon

Private
Full Member
Minuteman
Jul 13, 2013
84
35
Hi all. I'm ready to purchase a trigger for my PRS Rimfire rifle. It's a 700 clone so I have a lot of choices.

The first question is single vs 2 stage. I've got a lot of experience shooting both kinds and appreciate the benefits of each.
On my service rifle platform with a minimum weight of 4.5 lbs a 2 stage definitely helps.

I like 2 stage triggers, especially when they have to be heavy for the sake of safety or because of the rules of a particular game.

But they are definitely slower. With a 2 stage trigger you are essentially breaking the shot twice. First, you gently take up the first stage until you are at the wall, then you press through to fire. Two separate actions that each take time.

My thought is that in PRS, where there is a time factor, a single stage will be faster because you are only going through that cycle once.

That's my logic.

With that said, I have always felt that it is good to start by mimicking the set up of those who are experts in the field. More times than not if something doesn't seem to make sense the sense becomes apparent as I get familiarity.

So . . what are "The Pros Using". I can't seem to find anything on this within the last 2 or 3 years.

Also, is the TriggerTech still what people want? The Timney with the adjustable shoe looks interesting. Thoughts?

Thank you all.
 
There are several threads already covering most of what you’re asking, but a few quick answers:

1) Most top shooters run light single-stages.
2) TriggerTech Diamond and Bix‘n Andy Tac Sport Pro are the two most popular models, to my knowledge. Opinions vary on which is best. Timney, Jewell, and Geissele have all taken a back seat in PRS.
 
There are several threads already covering most of what you’re asking, but a few quick answers:

1) Most top shooters run light single-stages.
2) TriggerTech Diamond and Bix‘n Andy Tac Sport Pro are the two most popular models, to my knowledge. Opinions vary on which is best. Timney, Jewell, and Geissele have all taken a back seat in PRS.
This is the answer.

I personally like the TriggerTech Diamond Pro. I have 5 and they have all survived the KS/Oklahoma moon dust.
 
  • Like
Reactions: KnowNothing256
Do you have a maintenance routine on them?

I've got 5 TT Diamonds and don't do any maintenance on them despite them seeing a lot of adverse conditions. The only issue I've ever had was when I pierced a primer some of the metal primer flakes got down into the trigger and I had to flush it out with lighter fluid. Seems to be working fine since then, but I'm keeping an eye on it.
 
I changed the first one firstly because I use Bix on my Tikka's and Barnard PL action ( no other tier one options) and really like them.

Secondly I was hearing / reading really go report about them.

Thirdly while training with my new gun ( Lone Peak Fuzion) I started having incidental fires on bolt closure.
I increased the pull weight every time I had an incident ( thinking I was too light) and went from 250gr to 350gr in 2 steps. But I was not 100% sure having sorted the problem. Problem I never experienced before with my previous action a Zermatt Origin.

At first I really didn't like the Bix and even went back to the TT for a while.

But from the bullet central video ( must watch if you buy a Bix), I realized I didn't set it up properly.


Once set up properly, I fell in love! It is set at 280gr (10oz), but it "feels" lighter. I like the wide gator shoe. It is a bit like the pro curve but even wider. And the texture helps feeling the pressure increase. No over travel, very crisp break like the TT. But once you break the shot, you don't hit an immediate stop like on the TT. This has helps me improve my shots quite a bit I believe. You can let the shot breaking surprise you without having to control your finger travel to the perfection. A little bit of overtravel of it won't disturb the shot. It is more natural, in my opinion.

I'm not the best shooter in the world, and it may be just my trigger pulls that are not good enough for the TT....

But honestly I don't care, I like how the Bix make me shoot better.

Now all my TTs are for sell.
 
So . . what are "The Pros Using". I can't seem to find anything on this within the last 2 or 3 years.
They're using TT or BnA almost exclusively. Primarily single stages set between 8-12oz.


But from the bullet central video ( must watch if you buy a Bix), I realized I didn't set it up properly.
What had you set up improperly that you had to correct, bottom sear? I have a BnA Tacsport Pro-X two-stage sitting here but I'm waiting on my LP Fuzion barreled action to come in. I definitely want to get the setup right because I'm sure I'll love the trigger.
 
Last edited:
What had you set up improperly that you had to correct, bottom sear? I have a BnA Tacsport Pro-X two-stage sitting here but I'm waiting on my LP Fuzion barreled action to come in. I definitely want to get the setup right because I'm sure I'll love the trigger.
indeed it was the bottom sear setting that had to be done right.

Other triggers, I have always pin them on the action, and then just adjusted the pull force.

With the Bix Tac sport Pro , you should first " guess" your pull force setting adjusting it.

Then set the sear so it is not engaging when you close the bolt.

Then slowly increase it until it engage and then increase it just a tad plus for safety.



But with yours being a 2 stages there may be a specific video for it