One Piece Scope Mounts ..What do you use?

wooferocau · Jun 18, 2024

After some feedback on what people are using . Mounts has to have at least 20moa of cant available . Fixed or QD doesn't matter.

In all the years i have been using Sphur , primarily.... I also have Era -Tac and they have been fantastic but here in Aus obtaining them is very very difficult..

Any input and recommendations appreciated..

oldrifleman · Jun 18, 2024

I used Sphur until I started using ZCO scope then i switched to their mounts and they are excellent. never had an issue with Sphur though

Taylorbok · Jun 18, 2024

I really like the MDT with the stepped cap interface but then I tried a couple ARC mounts and the singe bolt makes that basically obsolete, currently the ARC M-Brace is my go to

Ichi · Jun 18, 2024

Moved to ARC M-Brace after a few cracked Spuhr clamps.

Mile High shooting will replace the Spuhr clamp free of charge. But I'd rather not deal with the hassle or find a cracked clamp when pulling a rifle out of the safe.

Received a Audere Adversus Gen 2 mount with the purchase of a Zeiss S3 from MK Machining. No issues with it. Audere is not a very well known brand out of San Marino. Or perhaps I should say that I had never heard of them. Several different heights, diameters, cants and colors are available.

Sagittarius · Jun 18, 2024

I went with the ARC M-Brace on my last two rifles.
They are super strong and precisely built; I like them a lot.

carbonbased · Jun 18, 2024

I use one Spuhr for looks and own two Arc Mbrace. Love the Mbrace. So easy.

But I have been thinking about buying a Near Manufacturing Alphamount with the Spuhr accessories compatible ring cap.

Reg ring caps

Richard, the owner, can make you whatever you want. He’s some genius machinist/designer. I own some of his Rem700 bases and they are amazing. He loves TRG’s.

One thing he’s not is a web designer or e-commerce wizard. He runs two sites (below). Call him, trust me, call and don’t email. He loves to chat and ships fast.

Alphamounts – TRG42.COM

Near Manufacturing - Rifle Scope Bases

Near Manufacturing - Precision scope bases and precision scope rings for SAKO M75, SAKO TRG-42, SAKO M995 TRG-S, Weatherby MKV and SVM, Remington 700, Winchester M70 - WSM, PRE 64, EXPRESS, TIKA-T3. The Ultimate Precision Long Range Scope Base. Superior Design, Materials and Craftsmanship -...

www.nearmfg.com

NiteQwill · Jun 18, 2024

Spuhr for years.

But the new hotness is GrayOps. Next Tangent will sit in a GrayOps.

LA260 · Jun 18, 2024

BO C1 max is the new one . always used BO mounts

4O6shootist · Jun 19, 2024

I have NF, M Brace, Audere, and an A419. All have been non-issue. Love the top single screw hinge on the mbrace, it'll never twist your scope off cant when torquing the rings.

Rob01 · Jun 19, 2024

I have used MDT, MPA, Warne, Spuhr and ARC mounts on my rifles over the years. The Spuhr is nice but more expensive than it needs to be. I really like the ARC after trying my first one and the ease of the single screw clamping system. Bottom line is all have worked and held the scope securely. I want to try a Seekins next as it looks interesting with the rail wedge.

OP don't get a QD.

LR1845 · Jun 19, 2024

ARC M-10 mounts are all I use anymore just make sure the hinge pins are centered before you clamp the ring screw down.

Islas82 · Jun 19, 2024

Hawkins, badger max, Area 419, gray ops all solid mounts.

TheOE800 · Jun 19, 2024

Current newness is A419, but I have Badger C1 MAX and Gray Ops. Each is good with its own pluses and minuses.

Taylorbok · Jun 19, 2024

Imo all mounts do the same job, hold your scope securely. I haven't had a need to add any accessories so that doesn't play a factor for me but might for some. It seems like most agree the easy mounting of the ARC just makes life that much easier. The MDT works well also but single screw is titties

MarinePMI · Jun 19, 2024

Ichi said:
Moved to ARC M-Brace after a few cracked Spuhr clamps.

Mile High shooting will replace the Spuhr clamp free of charge. But I'd rather not deal with the hassle or find a cracked clamp when pulling a rifle out of the safe.

Received a Audere Adversus Gen 2 mount with the purchase of a Zeiss S3 from MK Machining. No issues with it. Audere is not a very well known brand out of San Marino. Or perhaps I should say that I had never heard of them. Several different heights, diameters, cants and colors are available.

View attachment 8441737

Same here. I have several Spuhrs, and an Audere that was rebranded for "Hoplite" arms (now that was a train wreck), and have recently gotten an M-Brace. I'll be moving to M-Brace from here on out.

wooferocau · Jun 19, 2024

Hmmmm......... The ARC M-Brace looks very intriguing ....will have to see if these are available to Aus somehow..

MarinePMI · Jun 19, 2024

wooferocau said:
Hmmmm......... The ARC M-Brace looks very intriguing ....will have to see if these are available to Aus somehow..

The key discriminator is the ease of set up. With the single screw through the top of the rings, once the scope is leveled, it doesn't move as you tighten down the ring.

The Spurh's wedge thing helps, but it still nowhere as easy as the M-Brace. And the wedge doesn't work on scopes with wide turret knobs, unless you grind the point off. AMHIK

Kiba · Jun 19, 2024

I used spuhr exclusively for about 12 years, but after dealing with 5 cracked clamp bars between 11 Spuhr mounts over that time period I switched them all out to ARC M Brace on the guns that didn't need cantilever mounts and badger C1 on those that needed a cantilever mount. (Before the thread sidetracks about my 45% failure rate with spuhr, I was not adding lube to the hardware and my mountz torque drivers get checked 3-4 times a year in the NIST-traceable calibration lab at work, so it's not user error or a crappy out of spec torque driver overtightening the hardware.)

Happy with both the ARC and badger mounts, although I wish the badger C1 cantilever mounts had the clamp bar and low profile clamp hardware from the non-cantilever C1 max mounts instead of the smaller individual clamps and protruding nuts.

One negative to the ARC mounts is that if your scope has a very low profile elevation turret, the thicker top of the ARC rings can block your view of the turret and the alignment hash mark when behind the rifle. Some aren't happy that ARC doesn't offer any accessories for them yet (offset red dot mounts, etc) but for me that's not an issue. Also, their LRF mount is really stout and doesn't impart any additional load into the front ring cap or scope tube (unlike pretty much every other LRF mount out there.)

While I haven't used any yet, the gray ops, A419, MPA, Audere, Era Tac, Near, Tier 1, Hawkins, MDT, and the new Seekins mounts all look good as well.

Hennig · Jun 19, 2024

wooferocau said:
Hmmmm......... The ARC M-Brace looks very intriguing ....will have to see if these are available to Aus somehow..

I’m in Aus and have a pile of em - if there’s a will there’s a way!

Also I’m pretty sure ARC will send em direct as they’re under the ITAR limit etc.

rothgyr · Jun 19, 2024

I've been back and forth on mounts. Spuhr was good, but pricey. ARC M-BRACE was great, and the level was great, but the rings got in the way of my turrets. Not an issue for some, but my turrets are very low profile (USO). MPA BA mounts are very nice, and technically take Spuhr accessories on the side. I like that they mount with two Hex screws. They just work. Lately, I've been using Warne mounts. I like their heights, they're simple, they're cheap with a PRS discount, and they've got good mounting options for pic rails, etc.

Best I've ever been behind is Nightforce. Their top half of the rings just disappear and give an actual good view of the turret. I know a lot of companies claim to have a clear view of the turrets, but nothing comes close to beating Nightforce.

wooferocau · Jun 19, 2024

Hennig said:
I’m in Aus and have a pile of em - if there’s a will there’s a way!

Also I’m pretty sure ARC will send em direct as they’re under the ITAR limit etc.

Great to hear!!!

xxflyingturtlexx · Jun 19, 2024

I am in the “had it with spuhr” camp lately, would like to give Arc m-brace a shot but no red dot mount is a tough cookie for me

River44 · Jun 19, 2024

Tier One-USA

4O6shootist · Jun 20, 2024

xxflyingturtlexx said:
I am in the “had it with spuhr” camp lately, would like to give Arc m-brace a shot but no red dot mount is a tough cookie for me

But they do........

CSTactical · Jun 20, 2024

We carry Hawkins Precision, Zero Compromise Optic, American Rifle Company, Seekins, Leupold, Vortex and Nightforce one piece mounts which have all been consistently solid. I've also heard really good things from many about Gray Ops' mounts as well.

charnicus · Jun 20, 2024

Tier One and Badger.

roostercogburn98 · Jun 20, 2024

Picked up a Sphur one piece hunting mount for the 7-08. I think it’s the only Sphur mount that actually looks decent.
Other than that, I run Badger C1s and unimounts.

Toast · Jun 20, 2024

Is Aadmount toast?

carbonbased · Jun 20, 2024

Toast said:
Is Aadmount toast?

I do believe there is a joke here…Monsieur Toast…

And no, I don’t believe Aadmount is out of business. He usually makes things only after people order them, so much of his stuff appears out of stock.

He also takes a bit to ship. It’s a side hustle for him.

Toast · Jun 20, 2024

His mounts are amazing for a side hustle!

carbonbased · Jun 20, 2024

Toast said:
His mounts are amazing for a side hustle!

I have heard that. After just going to his site, I’m not sure he is still making the mounts, however. Seems to be still offering his levers, caps, etc.

Slides · Jun 21, 2024

The Athlon 20MOA mount that CR Kennedy bring in is hard to beat on price. Used several on different rifles.

I have also bought a 7MIL Porter Machine Works mount.

NLivingston · Jun 21, 2024

Bias warning.

Our one piece mounts here at Area 419 are honestly great. Unmatched scope grip, and diving board rigidity, as well as various accessory mount options and locations.

Anzac · Jun 21, 2024

Near Alphamount, in spades!
And RRS….

flyer1a · Jun 21, 2024

NLivingston said:
Bias warning.

Our one piece mounts here at Area 419 are honestly great. Unmatched scope grip, and diving board rigidity, as well as various accessory mount options and locations.

This MF spittin'

MO Fugga · Jun 21, 2024

Another vote for Near Mfg. Titanium awesomeness.

TheOE800 · Jun 21, 2024

MO Fugga said:
Another vote for Near Mfg. Titanium awesomeness.

Has he said they're Ti? I never got a straight answer from him. Regardless, great mounts. Available in your PX, today!

lizzardking308 · Jun 21, 2024

Badger C1.

carbonbased · Jun 21, 2024

TheOE800 said:
Has he said they're Ti? I never got a straight answer from him. Regardless, great mounts. Available in your PX, today!

I remember reading on his site that it’s some titanium alloy, but can’t find the citation anymore. Probably misremembered.

But here’s some info. Sounds proprietary.

Rifle Scopes - NEAR Alphamount

I received my NEAR Manufacturing Alphamount today, and wanted to post some pics. When I was reading up on them on here, JasonK had some nice pics, but I wanted to see some close ups as I kept hearing this mount referred to as machining art. Before I got my rifle all set up, I tried my best to...

www.snipershide.com

Rifle Scopes - NEAR Alphamount

I received my NEAR Manufacturing Alphamount today, and wanted to post some pics. When I was reading up on them on here, JasonK had some nice pics, but I wanted to see some close ups as I kept hearing this mount referred to as machining art. Before I got my rifle all set up, I tried my best to...

www.snipershide.com

Near Mfg. Alfa Mount for Weatherby

I have a Near Manufacturing Alpha mount for a Weatherby MK V. This mount fits the 9 lug long action only. It is a 1” mount the color is Matt black and it’s a 10 MOA. The screws and mounting instructions from Near will be included. I am going to a 30mm Scope so that’s why I’m selling this mount...

rokslide.com

These links are hardly proof, but there you have it.

Ha! He also owns the domain http://alphamount.ca/. Looks like it points to nearmfg.com.

Yslg77 · Jun 21, 2024

I have 3 spuhr mounts they are all fantastic. None of the zeros shift. I have a QD version on my 6-36 and I've swapped it from multiple rifles and it's always back on its exact zero.

oldrifleman · Jun 21, 2024

Yslg77 said:
I have 3 spuhr mounts they are all fantastic. None of the zeros shift. I have a QD version on my 6-36 and I've swapped it from multiple rifles and it's always back on its exact zero.

I have Spuhr mounts on all my NF ATCARS and never had an issue with the mounts, just switched scopes.

the_assman · Jun 21, 2024

NLivingston said:
Bias warning.

Our one piece mounts here at Area 419 are honestly great. Unmatched scope grip, and diving board rigidity, as well as various accessory mount options and locations.

i can vouch for the unmatched scope grip

i mocked up my scope to figure out placement and eye relief , and then took it shooting without torquing down the cap screws

with the ring cap screws just finger tight/snug the zero never wandered that whole afternoon

koshkin · Jun 21, 2024

Toast said:
Is Aadmount toast?

He has not been making mounts for a bit. Every once in a while I try to convince him to start again, but not luck so far.

On the higher end of things, I think I like the Area 419 mount the most for a non-cantilevered design. For a light cantilevered design, I have been very impressed with Reptilia AUS.

There are other good mounts there, obviously, and I have several, but if I had to just pick two, these would be it.

ILya

CK1.0 · Jun 21, 2024

I've had/run a few MPA BA mounts (a PRS staple for a long time) and have been happy with them for the most part, if one can't decide, don't overlook them just because they've been out for a while. They're a good no-nonsense mount that Phil has incrementally updated over the years. There are all kinds of accessories out there like diving boards and shit that work with them, and more recent ones will accept many of the Spuhr gadgets too.

That said, the next mount(s) I buy will be Gray Ops (like @NiteQwill said, new hotness).

Hennig · Jun 22, 2024

CK1.0 said:
I've had/run a few MPA BA mounts (a PRS staple for a long time) and have been happy with them for the most part, if one can't decide, don't overlook them just because they've been out for a while. They're a good no-nonsense mount that Phil has incrementally updated over the years. There are all kinds of accessories out there like diving boards and shit that work with them, and more recent ones will accept many of the Spuhr gadgets too.

That said, the next mount(s) I buy will be Gray Ops (like @NiteQwill said, new hotness).

The square washer on the Gen 2s, and the fact that the crossbolss hang out past them, annoyed me to no end.

stello1001 · Jun 22, 2024

No one running MPA now?

CK1.0 · Jun 22, 2024

Hennig said:
The square washer on the Gen 2s, and the fact that the crossbolss hang out past them, annoyed me to no end.

I don't care about that, I just mount them so the excess threads don't end up on the same side of the gun as the bolt. But, on second thought, yeah, skip the MPAs now that better options are available.

Because, what did annoy me (and what I'd forgotten about) is: I went through a bit of a phase where I was trying different height mounts a while back... I had bought 3 new MPA mounts at different heights, and found out the hard way that one of them was machined incorrectly/flawed when it slightly dented/crushed my scope tube! I emailed MPA about it telling them it fucked up my scope (figuring they might want the mount sent in to take a look at it, see if I was full of shit, maybe correct the problem) and nothing, crickets... they just completely blew me off! I ended up having to return the mount to EuroOptic (where I bought it) as defective due to MPA sticking their head in the sand. On my own with the (now worthless) scope.

I was lucky that it happened to be a Razor, it had been in excellent condition and I was planning to sell it when my newer version showed up until it went from being worth ~$1700 to $0, and if it wasn't for Vortex's kick-ass warranty and CS, I'd have been fucked! (Vortex fixed it, tested it, gave it a whole new scope body, at no charge.)

Milf Dots · Jun 22, 2024

It appears Global Defense is about to ship the new hotness to those of us doing the group buy, and they look as great as all their other products under their two companies GDI/Global Defense Initiatives Precision and ADM/American Defense Manufacturing.

https://gdiprecision.com/home

American Defense MFG, LLC AR15 Firearms, mounts and accessories

ADM is proud to supply high quality AR Style firearms, mounts and accessories to law enforcement, military, competition, hunting, and recreational enthusiasts across the country.

www.admmfg.com

Baron23 · Jun 22, 2024

This may be of mild interest. Now, we all know that in addition to pro shooters picking equipment that they think will enhance their ability to win, its also true that many of them use particular brands of gear because....well, they are sponsored. So, take some of this with a grain of salt.

Best Scope Mount – What The Pros Use

I’m currently publishing a series of posts that highlight the gear the 200 top-ranked shooters in t...

precisionrifleblog.com

wooferocau · Jun 23, 2024

Spuhr mounts.... I personally have never had an issue with their IMS mounts and i have had a lot of them over the years ..

Who has first hand experience with Spuhr "issues" and what were/are they ??

@koshkin is your dislike for Spuhr due to the tapered screws used on the ring caps? I can see how "If" there is an error in spacing/dimensions in regard to the holes it could result in the cap ends being "pinched" in causing them to indent on the scope tube ??

Having trouble using the site?

One Piece Scope Mounts ..What do you use?

Private

Sergeant

Private

Major Hide Member

Private

Attachments

💥💥💥💥

Best to jump high, and far!

Private

F. J. B.

Moderator

Gunny Sergeant

Old Salt

Argumentative

Private

Ban Cat Handler

Private

Ban Cat Handler

Supporter

Sergeant

Gunny Sergeant

Private

Meme smuggler!

Private

F. J. B.

Sniper's Hide Vendor

👻👻👻

Fudd gun collector extraordinaire

Sergeant

💥💥💥💥

Sergeant

💥💥💥💥

Sergeant of the Hide

Come shoot, losers.

Beyond the Wall

Craig, Area 419

Asshole

Argumentative

Sergeant

💥💥💥💥

Private

Sergeant

Sergeant of the Hide

Dark Lord Of Optics

\m/ SLAYER \m/

Sergeant

Professional Newb

\m/ SLAYER \m/

Poontificator

Check 6

Private

Similar threads