-
Having trouble using the site?
Post any issues in the thread below or reach out directly to support!
Contact support
Foundation Weight Installation
- Thread starter 12qwas
- Start date
I used blue painters tape and wrapped around the weights a couple times to make a press fit. Of course if you don’t have a center hole tapped and threaded on them then it’ll be tough to pull out
I was hoping to not need interior weights at all, and I bought one of the heaviest arca rails I could find to try to make it happen:
360precision.com
I ended up learning what I think several people already know, that the Foundation stocks are very tail heavy. So even with a somewhat beefy barrel profile and that extra heavy rail, I still needed internal weights to get the balance where I wanted it. At the end of the day I went with these weights for a variety of reasons (could be purchased individually, hex shape, o-ring, tapped).
l3idesignsolutions.com
Steel M-Lok ARCA Rail
Full-length ARCA mount that works with any RRS style attachments including bipods, tripods, and plate adaptors.
360precision.com
I ended up learning what I think several people already know, that the Foundation stocks are very tail heavy. So even with a somewhat beefy barrel profile and that extra heavy rail, I still needed internal weights to get the balance where I wanted it. At the end of the day I went with these weights for a variety of reasons (could be purchased individually, hex shape, o-ring, tapped).
Foundation Stock Weight – L3I Design Solutions
l3idesignsolutions.com
I needed full tungsten weights to get mine to ballance out. Silicone glue works.
Once they are in there, there is no reason to take them out.
Once they are in there, there is no reason to take them out.
I was hoping to not need interior weights at all, and I bought one of the heaviest arca rails I could find to try to make it happen:
Steel M-Lok ARCA Rail
Full-length ARCA mount that works with any RRS style attachments including bipods, tripods, and plate adaptors.
I ended up learning what I think several people already know, that the Foundation stocks are very tail heavy. So even with a somewhat beefy barrel profile and that extra heavy rail, I still needed internal weights to get the balance where I wanted it. At the end of the day I went with these weights for a variety of reasons (could be purchased individually, hex shape, o-ring, tapped).
Foundation Stock Weight – L3I Design Solutions
I thought the O-Ring was supposed to be enough to hold them in so that you don't need any extra adhesive
Tungsten Weight Kit - 0.6650" x 0.75" - 22 Pieces
Shop Tungsten (W) metal products - from cubes, spheres, sheets/plate metal to the highest quality TIG welding electrodes, bucking bars & more.
shop.tungsten.com
Similar threads
