Fx120i not turning on, just ticking?

louu

louu

The only NON methhead in NJ
Full Member
Minuteman
Aug 4, 2020
728
1,206
#1
Just my luck, today is the only day I have time to load for an upcoming match and my scale won't turn on.

I got it brand new, it's never moved from its spot in the house. I have the autotrickler v3 on it. It's a always worked perfectly. I've used it about 20 times.

I went to use it today and the secreen isn't turning on. It's making a slight ticking sound when plugged in.

Anyone have any suggestions? I guess I'll have to call Cambridge Monday?
 
#2
I think it's a bad power supply plug that came with the autotrickler. I left it plugged in for a few minutes and the power supply was hot when I unplugged it. I just used the one that came with the scale and it worked like normal. The only thing is the one that came with the scale says 1A output and the one that came with the autotrickler says 2000ma output. Is that OK to use the scale one for now?
 
#5
louu said:
I think it's a bad power supply plug that came with the autotrickler. I left it plugged in for a few minutes and the power supply was hot when I unplugged it. I just used the one that came with the scale and it worked like normal. The only thing is the one that came with the scale says 1A output and the one that came with the autotrickler says 2000ma output. Is that OK to use the scale one for now?
Click to expand...
You can buy a replacement power supply on Amazon with reverse polarity connector. You will get up and running just fine.

Let me find the link for you and edit this post.

Edit, just make sure the polarity is correct:

DTECH 12V 2A Power Adapter Supply AC to DC 3.5mm x 1.35mm Plug Wall Charger 4 Feet Extra Long Cord (Input 100V - 240V, Output 12 Volt 2 Amp) https://a.co/d/2iNBjUY
 
  • Like
Reactions: louu
#6
louu said:
I think it's a bad power supply plug that came with the autotrickler. I left it plugged in for a few minutes and the power supply was hot when I unplugged it. I just used the one that came with the scale and it worked like normal. The only thing is the one that came with the scale says 1A output and the one that came with the autotrickler says 2000ma output. Is that OK to use the scale one for now?
Click to expand...
This was going to be my first suggestion.
 
  • Like
Reactions: louu
#7
Thanks guys, I spent some time in the internet yesterday learning about this stuff. If anyone else has this problem be careful like @NiteQwill says this thing has reverse polarity compared to almost every other electronic out there. This scale uses center negative, seems like 99 percent of the power supply's on the jungle website have center positive polarity.

I found this one, that should be here today https://www.amazon.com/dp/B08SQ8NZ21?psc=1&ref=ppx_yo2ov_dt_b_product_details

I don't want to get another one from autotrickler because it will take forever to get here and my luck it will just break again lol. No to mention it's overpriced and I gotta pay a ton for shipping probably. Lots of stuff for this game is outrageous. I was just looking to get an armboard for dopes, the ones that say shooting stuff in the title are like $45. I got a football one for $5 and it's actually better.
 
  • Like
Reactions: MattK1, ShtrRdy and NiteQwill
#8
I had my power adapter block die. Same thing you’re describing. Autotrickler warranteed it but mines a v4 and under 2 years old.

In the mean time I was able to use the factory a&d power block.

Fwiw I had it in like a week in the US.
 
  • Like
Reactions: louu
#9
louu said:
Thanks guys, I spent some time in the internet yesterday learning about this stuff. If anyone else has this problem be careful like @NiteQwill says this thing has reverse polarity compared to almost every other electronic out there. This scale uses center negative, seems like 99 percent of the power supply's on the jungle website have center positive polarity.

I found this one, that should be here today https://www.amazon.com/dp/B08SQ8NZ21?psc=1&ref=ppx_yo2ov_dt_b_product_details

I don't want to get another one from autotrickler because it will take forever to get here and my luck it will just break again lol. No to mention it's overpriced and I gotta pay a ton for shipping probably. Lots of stuff for this game is outrageous. I was just looking to get an armboard for dopes, the ones that say shooting stuff in the title are like $45. I got a football one for $5 and it's actually better.
Click to expand...
@NiteQwill is this the correct power supply? I am guessing yes because you gave the thumbs up...just double checking because I am going to order one to have as a spare.
 
#10
  • Like
Reactions: LR1845
#11
I just loaded 100 rounds of dasher using the new power supply in post #7. Worked perfectly and nothing got warm or smelling like electrical fire lol. I ordered it last night at like 9pm and it showed up around 2pm today
 
  • Like
Reactions: MattK1, ShtrRdy and LR1845
You must log in or register to reply here.

Similar threads

S
6mm Arc/Lee powder throw/Area 419/LEVERevolution
Replies
1
Views
195
Carl_Ross
C
K
WTB WTB Autotrickler V1 controller
Replies
5
Views
180
Kramer93
K
R
Autotrickler V4 "Lb" issue
Replies
9
Views
407
Redleg84
R
B
Once fired brass to measure or not, headspace questions
Replies
4
Views
485
Doom
Doom
P
SOLD V3 autotrickler w/fx120i
Replies
4
Views
817
Wapiti96
W
Top Bottom
Back
Home
Forums
Merch
Alerts