Nosler SR-30 Alti Suppressor opinions

X

XLR308

Supporter
Supporter
Full Member
Minuteman
    • Mar 22, 2018
    5,063
    5,951
    Grand Junction, Colorado
    #1
    Since there are so many of you heathens on here with enough suppressors to require a separate safe to house them all I am curious.
    I handled and looked at a few of the Nosler suppressors today while out and about and have to say was intrigued with the Nosler SR-30 Anti.
    Very light for the size is what first caught my attention and the ability to disassemble for cleaning if needed and replace parts in the unfortunate event of a baffle strike over a full welded design.
    The aesthetics were not perfect I'm sure for some but I liked it so long as it performs.
    I was originally inquiring about an Omega 300 but ended up looking at these since they were available and could lay hands on them.
    Anyone had a chance to run them and make a comparison ?
    I mainly like the weight, serviceability and availability but curios what others have experienced using them.
     
    Last edited:
    • Like
    Reactions: NEC012
    #2
    They are fairly new to the market and there doesn’t seem to be much out on them. Nosler isn’t a suppressor company, and they haven’t been marketing them very hard it seems. Personally, I’d go with something like the DDC Enticer S Ti.

     
    • Like
    Reactions: XLR308
    #3
    I will check into the DDC can for sure and thanks for the reply was mainly curious about the Nosler suppressors as I honestly didn't even know they were making them.
    It was an impulse type of thing since I was looking for an Omega 30 and stumbled upon a Wyoming Arms 22lr can I had never heard of and really like the design features for a light 10/22 rifle and 22/45 pistols host.
    The Nosler 30 seemed like a great can for the price and weight savings since it would mostly be used for hunting and some 300bo SBR use as I'm not the mag dump type of abuser.
     
    #4
    I’m not sure that replaceable baffles should be considered a big selling point. My understanding is that only the manufacturer, or at least an SOT manufacturer, can legally repair a supressor. And, even if you- as the end customer- could buy replacement baffles, they are regulated by the ATF as supressors themselves. So, you would be on the hook for that $200 fee and ATF bullshit, just for the replacement part.
     
    • Like
    Reactions: XLR308 and Bluedog82
    #5
    hlee said:
    I’m not sure that replaceable baffles should be considered a big selling point. My understanding is that only the manufacturer, or at least an SOT manufacturer, can legally repair a supressor. And, even if you- as the end customer- could buy replacement baffles, they are regulated by the ATF as supressors themselves. So, you would be on the hook for that $200 fee and ATF bullshit, just for the replacement part.
    Click to expand...
    Good point, I may have misinterpreted the text.
    By looking at the design and the way its manufactured I understood that only the rear section is the serialized part and subject to the NFA but obviously could be wrong on that.
     
    #6
    I have a feeling alot of those retarded/dumb atf rules will be ruled invalid in light of the overturning of chevron deference. It may take years but there is hope.

    Stick with known brands that have a long history of making cans. Ones that will be around in 10 years and won't discontinue their whole line becuase no one buys their shit.
     
    • Like
    Reactions: FuhQ
    #7
    DeathBeforeDismount said:
    I have a feeling alot of those retarded/dumb atf rules will be ruled invalid in light of the overturning of chevron deference. It may take years but there is hope.

    Stick with known brands that have a long history of making cans. Ones that will be around in 10 years and won't discontinue their whole line becuase no one buys their shit.
    Click to expand...
    Public hangings for subverting the constitution could fast track the process and boost popcorn sales.
    Just saying 🤔
     
    • Like
    Reactions: dpw4x4
    #8
    XLR308 said:
    Since there are so many of you heathens on here with enough suppressors to require a separate safe to house them all I am curious.
    I handled and looked at a few of the Nosler suppressors today while out and about and have to say was intrigued with the Nosler SR-30 Anti.
    Very light for the size is what first caught my attention and the ability to disassemble for cleaning if needed and replace parts in the unfortunate event of a baffle strike over a full welded design.
    The aesthetics were not perfect I'm sure for some but I liked it so long as it performs.
    I was originally inquiring about an Omega 300 but ended up looking at these since they were available and could lay hands on them.
    Anyone had a chance to run them and make a comparison ?
    I mainly like the weight, serviceability and availability but curios what others have experienced using them.
    Click to expand...


    These are either licensed or rebranded Stingerworx suppressors. But I'm pretty sure the tech is licensed and slightly modified.

    I do know someone that tried one and said it wasn't bad, but wasn't great.

    For centerfire rifle imo disassembly for cleaning likely isn't necessary unless you're an extremely high volume shooter. There are also ultrasonic products and stand alone suppressor cleaner products that can easily fix that anyway.

    As far as strikes companies cut and reweld stuff all the time if that unfortunately happens.

    I would suggest looking at these over the omega or nosler personally if you want something great for under 1k

    Otter creek Labs Hydrogen S
    Diligent defense Enticer ti S
    Liberty precision machine Mach S
    Resilient Jolene S
     
    • Like
    Reactions: FuhQ and XLR308
    #9
    NEC012 said:
    I like their bullets, I’d never buy anything else of theirs though. Maybe their prepped bras but a rifle or silencer? No way.
    Click to expand...
    I quit buying Nosler bullets some time ago when they went full retard on pricing.
    Still have and use a bunch of thier brass but it's been pretty much replaced with lapua so still have some new collecting dust but it's definitely high quality.
    I might give the 30cal can a try if I can't get the omega 30 in a reasonable time frame.
     
    #11
    1000002236.jpg


    On my kimber 22". It's long but I don't even notice the extra 9oz
     
    • Like
    Reactions: XLR308
    #12
    joe777 said:
    I'm running an SR-30 Alti right now on my 243 day gun and my 5.56 AR night gun. I like it and it seems to suppress well
    Click to expand...
    The only real negatives I have seen from reviews is the coating blistering and burning off with moderate rate of fire.
    Sounds mostly like an improper cerakote job.
    Other than that haven't really seen any real negatives.
     
    #13
    Hasn't happened to mine yet but i fully accept it's for hunting and not fire rate. Yesterday was about 90 degrees and I fired it a good bit in the sun. Coating is still fine but I wouldn't care anyway. Probably gonna paint it flat black.
     
    • Like
    Reactions: XLR308
    #14
    joe777 said:
    Hasn't happened to mine yet but i fully accept it's for hunting and not fire rate. Yesterday was about 90 degrees and I fired it a good bit in the sun. Coating is still fine but I wouldn't care anyway. Probably gonna paint it flat black.
    Click to expand...
    If it was a wide spread problem it would be all over the forums with people bitching about it.
     
    You must log in or register to reply here.

    Similar threads

    hafejd30
    Suppressors TBAC Ultra 338 Gen 2 SR vs Ultra 9??
    Replies
    22
    Views
    899
    Bacarrat
    Bacarrat
    GRIFFIN_ARMAMENT
    Suppressors Introducing the Recce 5K™ Suppressor From GRIFFIN ARMAMENT
    Replies
    9
    Views
    2K
    thedude824
    T
    Lowlight
    Nosler New Suppressors
    Replies
    25
    Views
    6K
    SilencedShooter11B
    SilencedShooter11B
    Supersubes
    Suppressors SiCo Scythe review
    Replies
    27
    Views
    5K
    5RWill
    5RWill
    Bakwa
    Casual KAC SR-15 Comparison [a study in performance]
    Replies
    74
    Views
    4K
    SigSauerM7
    S
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts