Ultrasonic solution for brass

adaptive · Aug 9, 2024

Hi there, today is my first time using an ultrasonic cleaner for my brass. The specs on mine are 10L 600W heater and 240W OSC power. I did 100 cases of brass using heat distilled water and a squirt of dawn. I degassed for 5 mins then run two cycles of 20mins. Cases feel squeaky clean but I still see black carbon on the inside and primer pocket (see pics). Is this the expectation or does that mean they are still not clean?

Is there an alternative solution that you recommend?

DHDeal · Aug 9, 2024

Lemishine added to the mix tends to remove more of the darker streaks from the brass for me. I rarely use ultra sonic anymore though.

marchboom · Aug 11, 2024

Add Lemishine at the rate of 1/2 teaspoon per quart of water. Dawn adds to the cleaning or, what I use, Armor All Wash & Wax. Leave in solution no longer than 45-60 mins. Otherwise your brass will turn pink.

The Lemishine helps get a lot of the carbon out.

adaptive · Aug 11, 2024

Thanks for the responses, I will try lemishine. Pink brass lol that would be cool

marchboom · Aug 11, 2024

adaptive said:
Thanks for the responses, I will try lemishine. Pink brass lol that would be cool

Too much Lemishine OR leaving brass in the solution too long will cause this discoloration.

adaptive · Aug 11, 2024

marchboom said:
Too much Lemishine OR leaving brass in the solution too long will cause this discoloration.

At what rate do you use the Armor All Wash & Wax?

marchboom · Aug 11, 2024

Maybe 1/2 teaspoon to 1 gallon. It's not critical.

adaptive · Aug 11, 2024

marchboom said:
Maybe 1/2 teaspoon to 1 gallon. It's not critical.

Thanks, for Limeshine, do you use this:
Lemi Shine Dishwasher Detergent Powder Booster
or
Lemi Shine Liquid Rinse Aid

marchboom · Aug 11, 2024

Use the power booster. You'll find it in the dishwasher detergent (Cascade, etc) section of a grocery store.

Broncovan · Aug 11, 2024

I use the powder booster and dawn. It won't get the inside and primer pockets "squeaky clean" unless you use the stainless pins. I don't feel that the juice is worth the squeeze dealing with the pins though.

marchboom · Aug 11, 2024

Broncovan said:
I use the powder booster and dawn. It won't get the inside and primer pockets "squeaky clean" unless you use the stainless pins. I don't feel that the juice is worth the squeeze dealing with the pins though.

I agree. I like very clean brass but it is just too much trouble to use the pins. Not to mention the damage pins do to the brass and some may get stuck in the brass...IMO. Lemishine in an ultrasonic cleaner, then into walnut media will make the brass as clean as I would want. If I want it to be more shiny I'll break out the Brasso (that will never happen).

adaptive · Aug 11, 2024

Damn this stuff really works lol cases are shiny inside, outside and even primer pockets. No signs for copper. I used Dawn and 1/2 teaspoon of Lemishine per 1L of water. I ran it for 45mins then placed the cases in another bucket with some baking soda to counter any acidic reaction. Awesome and super easy! Thanks for the help guys

marchboom · Aug 11, 2024

Now put those cases in a tumbler with walnut or corncob media for an hour or so and they will really shine. The Lemishine alone doesn't make them shine but they are really clean.

ma smith · Aug 11, 2024

Looks great. Just make sure you lube those necks if they are bright with no carbon residual.

Search

Search

Download Gravity Ballistics

Having trouble using the site?

Ultrasonic solution for brass

adaptive

Private

Attachments

DHDeal

Sergeant

marchboom

Private

adaptive

Private

marchboom

Private

adaptive

Private

marchboom

Private

adaptive

Private

marchboom

Private

Broncovan

FHEC

marchboom

Private

adaptive

Private

Attachments

marchboom

Private

ma smith

Old Salt

Similar threads