SureFire FA762-SS cloning?

KAZ1014 · Jun 4, 2024

Sorry to jump in. SF warden also can be modified to attach MB762SS. I have prototype and perfectly lock the MB.
Just need to find out how thick outer cans thickness should be.

Ccampff · Jun 12, 2024

No. Do not do this again.- The Management

golden11lead · Jul 16, 2024

KAZ1014 said:
Sorry to jump in. SF warden also can be modified to attach MB762SS. I have prototype and perfectly lock the MB.
Just need to find out how thick outer cans thickness should be.

do you have any pictures of this? planning on doing the same. Trying to work with a local gun shop in order to offer this conversion.

Skunk · Jul 16, 2024

My whole suppressor is based on a Warden.

Terry Cross · Jul 16, 2024

Is there any demand for the SureFire FA762-SS flash hider style adapters?

Any of the DARPA or M40 variants use that one?

Stevo86 · Jul 16, 2024

A5 uses the MB762ssal/re and DARPA xm3 CA762ssal/re

lizzardking308 · Jul 17, 2024

Terry Cross said:
Is there any demand for the SureFire FA762-SS flash hider style adapters?

Any of the DARPA or M40 variants use that one?

They sell for $400-$500+, so I would assume there’s at least a decent demand. KMW clone can??? I’m in for the group buy!

Terry Cross · Jul 17, 2024

lizzardking308 said:
They sell for $400-$500+, so I would assume there’s at least a decent demand. KMW clone can??? I’m in for the group buy!

LOL.
Definitely NOT considering making suppressors, clone or not.
Not going to make clone adapters either.

Until recently, I have been trashing any CA762ssal/re muzzle devices that were coming in on agency rebarrel jobs. Didn't know if it was worth saving a few, thus my question above.

shlouf · Jul 17, 2024

Terry Cross said:
LOL.
Definitely NOT considering making suppressors, clone or not.
Not going to make clone adapters either.

Until recently, I have been trashing any CA762ssal/re muzzle devices that were coming in on agency rebarrel jobs. Didn't know if it was worth saving a few, thus my question above.

Easily $3-400 a piece on the flash hider versions

Jdowns0415 · Jul 17, 2024

I have one of these brakes sitting around....I know ecco machine is backed up and not taking any more work to make conversions. is there another machinist around that can do the conversion with a tab to re-index the can on the mount the same way each time?

kft101 · Jul 17, 2024

Terry Cross said:
LOL.
Definitely NOT considering making suppressors, clone or not.
Not going to make clone adapters either.

Until recently, I have been trashing any CA762ssal/re muzzle devices that were coming in on agency rebarrel jobs. Didn't know if it was worth saving a few, thus my question above.

Coejro · Jul 17, 2024

@Terry Cross last CA762SSAL/RE that sold was north of $650 a few weeks ago. I’d say those of us who enjoy clones would appreciate a new supply should it appear…..

shlouf · Jul 17, 2024

Jdowns0415 said:
I have one of these brakes sitting around....I know ecco machine is backed up and not taking any more work to make conversions. is there another machinist around that can do the conversion with a tab to re-index the can on the mount the same way each time?

You’ll save considerable weight adding the tab to the baffle stack instead of having it hanging off the front of the adapter

Jdowns0415 · Jul 17, 2024

shlouf said:
You’ll save considerable weight adding the tab to the baffle stack instead of having it hanging off the front of the adapter

either way I just need to know who I should send it to in order to get machined.

shlouf · Jul 19, 2024

My xm-3 should be done in a month or so, so I made some time to finish my clone can.

Sounds great on a 12” 6.5G and a 24” 6.5c using a quell tech OTB adapter.
9” tube with a 3.25” shelf. Stack order against the shelf:
Alignment tab
Flat SS baffle
2 SS double angle cones
7 Ti double angle cones. All the cones single clipped and about evenly spaced.

For the alignment tab, I cut a 50 degree cone then dremeled all the cone away except for a little triangle tab that the muzzle device can only index on one way without touching. No baffle pics, but I’ll post pics of how the tab works when I get the rifle back.

Weighs in at a hair over 19oz, with 5 and change of that being the Surefire adapter.

Jdowns0415 · Jul 19, 2024

shlouf said:
My xm-3 should be done in a month or so, so I made some time to finish my clone can.

Sounds great on a 12” 6.5G and a 24” 6.5c using a quell tech OTB adapter.
9” tube with a 3.25” shelf. Stack order against the shelf:
Alignment tab
Flat SS baffle
2 SS double angle cones
7 Ti double angle cones. All the cones single clipped and about evenly spaced.

For the alignment tab, I cut a 50 degree cone then dremeled all the cone away except for a little triangle tab that the muzzle device can only index on one way without touching. No baffle pics, but I’ll post pics of how the tab works when I get the rifle back.

Weighs in at a hair over 19oz, with 5 and change of that being the Surefire adapter.

looking forward to seeing that. I'm waiting for ECCO to start taking work orders again.

Terry Cross · Jul 30, 2024

Accessories - FS: One lot of take-off SureFire CA762SSAL/RE suppressor adapters.

As work rifles come in for re-barrel/re-work, I have not been keeping the various muzzle devices. A few months ago, I decided to save a few of the SureFire CA762SSAL/RE adapters hoping they might find a home. I want to sell these as a group. I have some of the proper size timing shim sets I...

www.snipershide.com

shlouf · Jul 30, 2024

I’ll take that lot and distribute them amongst the clone community at non-retarded prices. I sent you an email Terry.

lizzardking308 · Aug 7, 2024

UPDATE - I have a guy that’s local to me that’s looking to replicate Skunk’s HUB mount. He is still working on it as he gets spare time here and there, but said he would likely be willing to do more once he gets mine done first. Best guess is another month or two of him tinkering with it until he finishes, but hopefully another option for everyone.

shlouf · Aug 13, 2024

Jdowns0415 said:
looking forward to seeing that. I'm waiting for ECCO to start taking work orders again.

Like so.

Jrb572 · Aug 13, 2024

Jdowns0415 said:
looking forward to seeing that. I'm waiting for ECCO to start taking work orders again.

What type of flash hider is it considered? I contacted them and they said they do not do anything for legacy SureFire brakes or flash hiders.

shlouf · Aug 13, 2024

They are legacy muzzle devices

Having trouble using the site?

SureFire FA762-SS cloning?

Private

Supporter

Private

Amongst the Enemy

Dingleberry

No one

Sergeant

Dingleberry

Gunny Sergeant

Sergeant of the Hide

Objective

Private

Gunny Sergeant

Sergeant of the Hide

Gunny Sergeant

Sergeant of the Hide

Dingleberry

Gunny Sergeant

Sergeant

Gunny Sergeant

Full Member

Gunny Sergeant

Similar threads