• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Questions on 25GT

NCSWATSNIPER

Private
Minuteman
Aug 2, 2020
21
10
I currently shoot 6gt in PRS and want to try the 25gt but have a few questions. I have the SAC modular sizing die and will be using Alpha brass. What bushing and mandrel for the SAC die would be the go to for the 25 cal ? Also what are you using to seat the bullet ? I’ll be using a 26” barrel, alpha brass and I have both Varget and H4350. I’ll be using the Berger 135g or the Hornady 134 g bullets. What is the “sweet spot” in velocity to run the 25 GT ? What initial charge weights should I start with on the low end ? Thanks
 
I’m using a 282 bushing on alpha 25 creed brass I’m assuming you would be in that neighborhood for the gt. I’m using the seater die by sac, should work for the 25 gt as well
 
My GRT reloading app shows 58k psi at 2780-2800 with 135s and 36.5-36.8 H4350, and with varget at 2740-2760fps, 34.2-34.5gr. There is a 25gt Facebook group as well. I have brass and barrel is at smith getting cut soon. 28" finished 7.5tw brux heavy varmint.
 
  • Like
Reactions: NCSWATSNIPER
UPDATE:
I went with one of Austin Orgains CRB 28” barrels with 1:7.5 twist. Using Alpha 25gt brass with 135 bergers and 36.6 g of H4350. Gets me around 2726 fps. I’m using the SAC modular sizing die with a 281 bushing and 255 mandrel (which is recommended by Alpha). Picture attached is from working on setting up data out to 1275 yards on my kestrel. 56 shots total with sd of 5 and es of 23. Can’t ask for much more than that. I shot my 1st PRS match a couple of weeks ago and was really able to see my hits and misses a lot better running the heavier bullet and slower speed than I was able to see shooting my 6gt. The small amount of increased recoil is not really noticeable during shooting stages. So far I’m loving the 25gt and plan to stick with this caliber for a while.
 

Attachments

  • IMG_1891.jpeg
    IMG_1891.jpeg
    424.4 KB · Views: 73
UPDATE:
I went with one of Austin Orgains CRB 28” barrels with 1:7.5 twist. Using Alpha 25gt brass with 135 bergers and 36.6 g of H4350. Gets me around 2726 fps. I’m using the SAC modular sizing die with a 281 bushing and 255 mandrel (which is recommended by Alpha). Picture attached is from working on setting up data out to 1275 yards on my kestrel. 56 shots total with sd of 5 and es of 23. Can’t ask for much more than that. I shot my 1st PRS match a couple of weeks ago and was really able to see my hits and misses a lot better running the heavier bullet and slower speed than I was able to see shooting my 6gt. The small amount of increased recoil is not really noticeable during shooting stages. So far I’m loving the 25gt and plan to stick with this caliber for a while.
How many rounds are on your barrel?
 
Someone else would be better suited to answer this question. For me, I was already shooting 6gt so at the time I switched I already had a lot of brass, running the SAC modular die so only had to buy a new bushing and mandrel for it. Seating with SAC Infinity die so no new dies to buy. I have plenty of H4350 and Varget. I wanted to run a heavier bullet than what I could in 6gt and run it slower so I could see more during PRS matches. So for me it was limited expense to switch and I knew it would do all the things I wanted it to do for PRS. Im sure the 25x47 could do all those things too but I don’t know if there is an advantage with one or the other for what my purpose is.
 
Last edited:
  • Like
Reactions: 4O6shootist
What would be the advantage of running the 25 GT over the 25 x 47 case?
Whats the advantage of X47 over 25cm? Same question......lil slower, lil less powder and recoil, lil more barrel life. Lots guys are running 6mm slower with high bc bullets all the time. A 25gt with a 135 going 2750 has as good or better wind than all the highest bc 6mm bullets running 2900fps.
 
What freebore has been working with the 135s? I see alpha offers 150 or 180 only. My 25 CM has a short freebore and works well but the bullet is stuffed in there to the NeckScreenshot_20240411_140824_Photos.jpg shoulder junction.
 
What freebore has been working with the 135s? I see alpha offers 150 or 180 only. My 25 CM has a short freebore and works well but the bullet is stuffed in there to the NeckView attachment 8394338 shoulder junction.
I went with the 180fb reamer as I generally start at 30k in load dev and work further back. I shoot the 135 35k off in my 25cm, which has 150k freebore.
 
  • Like
Reactions: LRPC243
UPDATE:
I went with one of Austin Orgains CRB 28” barrels with 1:7.5 twist. Using Alpha 25gt brass with 135 bergers and 36.6 g of H4350. Gets me around 2726 fps. I’m using the SAC modular sizing die with a 281 bushing and 255 mandrel (which is recommended by Alpha). Picture attached is from working on setting up data out to 1275 yards on my kestrel. 56 shots total with sd of 5 and es of 23. Can’t ask for much more than that. I shot my 1st PRS match a couple of weeks ago and was really able to see my hits and misses a lot better running the heavier bullet and slower speed than I was able to see shooting my 6gt. The small amount of increased recoil is not really noticeable during shooting stages. So far I’m loving the 25gt and plan to stick with this caliber for a while.

Glad you had an overall positive experience, I also shoot 6GT but want something a little slower and easier to see. I started PRS in October 2023 and was shooting .308 originally. Got hooked and bought a MPA rifle chambered in 6GT but noticed that it’s harder for me to spot my splash especially with west coast winds! I’ve been looking at 22GT and 25GT as alternatives since I too have brass and would just need bushing and mandrels to make the swap. As far as recoil I wouldn’t mind 25 Cal as I was doing okay with a .308 at local matches
 
UPDATE:
I went with one of Austin Orgains CRB 28” barrels with 1:7.5 twist. Using Alpha 25gt brass with 135 bergers and 36.6 g of H4350. Gets me around 2726 fps. I’m using the SAC modular sizing die with a 281 bushing and 255 mandrel (which is recommended by Alpha). Picture attached is from working on setting up data out to 1275 yards on my kestrel. 56 shots total with sd of 5 and es of 23. Can’t ask for much more than that. I shot my 1st PRS match a couple of weeks ago and was really able to see my hits and misses a lot better running the heavier bullet and slower speed than I was able to see shooting my 6gt. The small amount of increased recoil is not really noticeable during shooting stages. So far I’m loving the 25gt and plan to stick with this caliber for a while.
Just got my CRB blank in the mail today and I too am wanting to go 25GT just truthfully because it seems like everyone else is going 25x47 and I like to be different 🤣. Plus I am planning on keeping it around 2700fps where most of the 25x47 shooters I know well are running theirs and that is no problem with either caliber. I have put a lot of rounds down range this year laying on that exact deck at Coleman’s Creek.
 
I took mine out today for first time. Barrel is 28" Shilen Select Match 7 twist 4 groove on Kauger Arms VPR action bedded in MDT ACC Elite, Alpha OCD brass, BR4 primers, 134 ELDMs at .035 off lands with 36 grains of RL16 for first 100 rounds. First few rounds were 2590ish and it quickly went to 2640ish. I cleaned after 3 rounds, again after next 5 rounds and one more at 40 round count. Only had 354 yards today but it was a hammer on a 4" squirrel. Going to test N150, N160 and N555. Barrel times for all powders are right around 2700 and 2770 + or - 20 fps, those are 1 grain plus below projected max in QL. So far I am really impressed with the 25GT. The barreled action was provided to us for testing. So far so good. Going to be fun testing. I hope I can find some 135 LRHTs at a reasonable cost to test. When I agreed to take this project on, 135s were 56 to 63 and 134s were 40, so I got 600 134s to start. I like Bergers but pricing is so hit and miss nowadays. I will post results later, may be a few months, very busy with other life things.

20240706_155611.jpg
 
Last edited:
I went from 6.5 creed to 25 creed to 25 GT. In the same rifle I went from spotting barricade impacts/misses at 400 with the 6.5 to 350ish with the 25CM TO 200ish with the 25GT. I improved my recoil management but there is definitely a lot less recoil in 25 GT than the 6.5 creed.
(I was running 140s at 2825 in the 6.5 CM and 131s @2775 in the 25 GT)
 
  • Like
Reactions: ncyotecaller