Manners / Tac Ops Possible Collaboration Build

M

MikeRTacOps

Private
Commercial Supporter
Full Member
Minuteman
Jun 18, 2017
1,399
4,403
#1
Tom and I have been speaking about doing a collaboration build. The platform would be the Tac Ops X-Ray 51mf. That would be his T4A folder with a Badger Forward EFR mount with a Krieger Varmint contour barrel installed into a Surgeon 591 action & DBM. I’ll probably offer a 16 ¼ to 18 inch barrel threaded for a Tac Ops Titanium Can. He was thinking seriously about discontinuing the folder and I hope that he keeps it in his fine inventory of products.

We are still in talks about this collaboration and wanted to see who might be interested? We are talking about 25 to 50 platforms atm



Mike R.
 
Last edited:
  • Like
  • Love
Reactions: Stan73, Krob95, duramaxed and 10 others
#2
I just finished rereading your other thread and now this. A Tac Ops in a hunting platform needs to find its way up to Alaska. And talked about if over a halibut/salmon fishing trip on Prince William Sound, my boats in Valdez.
IMG_1818.jpeg
IMG_0253.jpeg
IMG_0237.jpeg
IMG_1355.jpeg
IMG_9819.jpeg
 
  • Like
Reactions: JeffLebowski, Mississippi-tacA1, Charlie112 and 4 others
#3
Last edited:
  • Like
Reactions: camocorvette, MikeRTacOps and rope
#5
Well if you are asking if there would be any interest in the collaboration I think we all know the answer Mike…😉

It isn’t exactly a secret that you build some of the finest rifles available and Tom stocks have been the benchmark since they were released. I have owned a few folders and although I can’t justify the added weight for my uses I have to say they are truly excellent.

This would be an awesome project!
 
  • Like
Reactions: dlouie87 and deltawiskey
#6
jbell said:
Well if you are asking if there would be any interest in the collaboration I think we all know the answer Mike…😉

It isn’t exactly a secret that you build some of the finest rifles available and Tom stocks have been the benchmark since they were released. I have owned a few folders and although I can’t justify the added weight for my uses I have to say they are truly excellent.

This would be an awesome project!
Click to expand...
Appreciate the kind words that's very kind of you ;) You are correct Tom makes unbelievable products we are definitely looking forward to this possible Collaboration should it come to fruition in the near future...

Mike R.
 
#7
I haven’t had the pleasure of holding much less shooting a build from one of the master gunsmiths of the hides. I do have a few MCS stocked rifles. I think the support for this collaboration will be there. I have shot a buddies T4A quite a few times. I can’t imagine how awesome this build will be. I look forward to see how you spec the build.
 
#10
LeftyJason said:
You post this with out even a picture? You must have something you can mock up.

I'm too poor for your builds but they look great.
Click to expand...
My Ninja just posted some pics :) If your money is tight I'll send you a ski mask and a suppressed Glock 19 with no numbers. Hit a bank and you'll be in the mix. If you get caught only give them my first name don't completely rat me out :ROFLMAO:

Mike R.
 
  • Haha
  • Like
Reactions: JeffLebowski, bigbuckslayer3, Stormshadow and 12 others
#11
MikeRTacOps said:
My Ninja just posted some pics :) If your money is tight I'll send you a ski mask and a suppressed Glock 19 with no numbers. Hit a bank and you'll be in the mix. If you get caught only give them my first name don't completely rat me out :ROFLMAO:

Mike R.
Click to expand...
I see you sick bastards laughing you like the way I think ? I'll tell you what , I'll drive the getaway car while you fkers run into the bank :ROFLMAO: lmao

Mike R.
 
  • Like
Reactions: cooper_257, dlouie87, jbell and 1 other person
#22
Part of me wonders if I can replace the thumbwheel on my Delta-51 with that recessed head allen bolt. Quick adjustment versus lower profile. It would definitely make it easier to get my cheek pad/stock pack on and situated. No reflection on Mike or Terry, the cheek piece is rock solid and does what it's supposed to do.
 
#27
MikeRTacOps said:
Tom and I have been speaking about doing a collaboration build. The platform would be the Tac Ops X-Ray 51mf. That would be his T4A folder with a Badger Forward EFR mount with a Krieger Varmint contour barrel installed into a Surgeon 591 action & DBM. I’ll probably offer a 16 ¼ to 18 inch barrel threaded for a Tac Ops Titanium Can. He was thinking seriously about discontinuing the folder and I hope that he keeps it in his fine inventory of products.

We are still in talks about this collaboration and wanted to see who might be interested? We are talking about 25 to 50 platforms atm



Mike R.
Click to expand...
Well, you already got my money 💰……. But no contour barrel for me, heavy
 
#30
I'm saving this for later!! You can be my Donald and I'll be your Janurary 6th Guy.....:cool:

"If your money is tight I'll send you a ski mask and a suppressed Glock 19 with no numbers. Hit a bank and you'll be in the mix. If you get caught only give them my first name don't completely rat me out"
 
You must log in or register to reply here.

Similar threads

M
Firearms TAC OPS AND SURGEON 591'S AND BOTTOM MEDALS
Replies
5
Views
1K
MikeRTacOps
M
M
TAC OPS / KMW Collaboration
Replies
941
Views
68K
TheOE800
TheOE800
C
SOLD Tac Ops X-Ray 51
Replies
18
Views
3K
Cheytacbanger
C
Aries64
Accessories VERY FEW TAC OPS DRAG BAGS REMAINING!
Replies
11
Views
1K
Aries64
Aries64
Aries64
Group Buys VERY LIMITED NUMBER OF OLIVE DRAB, COYOTE BROWN, & MULTICAM TAC OPS DRAG BAGS AVAILABLE
Replies
27
Views
2K
Aries64
Aries64
Top Bottom
Back
Home
Forums
Merch
Alerts