Josh @bohem from Patriot Valley Arms posted up on Facebook that he is now offering Osprey match grade AR15 .223 Wylde barrels in 16", 18" and 20" length. Anyone who has used the other Osprey barrels knows that they shoot so I don't expect anything less from these barrels. Worth a look if you are looking to get the best accuracy out of your AR platform.
-
Having trouble using the site?
Contact support
PVA now offering AR15 barrels!
- Thread starter Rob01
- Start date
These are ready to ship barrels, not customs, as such they're run to a spec and 1/2-28 is still (as much as I don't care for it) the 223 spec muzzle thread. If you would like a custom we can do that for an upcharge. If you won't want to do that we do have a 1/2 to 5/8 adapter that we make in house and it's dead true. We've been using them for helping hunting rifle users and factory barrel AR users for a number of years now.
Built this upper this week to test PVA's 16" 223 Wylde AR15 barrel..
Specs
16" PVA 223 Wylde
Mid length gas
1/2-28 muzzle threads
0.750" Gas tenon
BCM MOD4 thermofit upper receiver
BCM 15" MCMR MLOK
BCM .750 fixed gas block
Rubber City Armory adjustable gas key BCG
Found loads with 77c/8208 and 69TMK /Varget that were shooting in the 0.2s @ 100yd.
Varget / 69TMK was very slow. Super accurate, but very slow.
22.6gr Varget 69 TMK
23.2gr 8208 77cc
23.4gr 8208 77c
Last edited:
Here the highest Varget /69 TMK charge I tested (23.6gr).. still very good 0.5moa accuracy but man as the Varget charge weights went up, the SD's went through the roof and the velocity was still very slow for a 16" barrel and 69gr bullet.
8208 is the ticket for speed, accuracy and low single digit SD's which is no suprise. 77's with 23.2-23.6gr 8208 has been my AR accuracy load for a long time
8208 is the ticket for speed, accuracy and low single digit SD's which is no suprise. 77's with 23.2-23.6gr 8208 has been my AR accuracy load for a long time
@bohem - It's awesome that you are now offering Osprey AR barrels. A few quick questions.
1. Any plans to offer a 6mm ARC version?
2. What are the weights of the different lengths for the 223 Wylde versions? I'm mainly interested in the 16".
3. Are these barrels customizable in any way? I'm interested in fluting options and finish options like bead blast and Cerakote.
1. Any plans to offer a 6mm ARC version?
2. What are the weights of the different lengths for the 223 Wylde versions? I'm mainly interested in the 16".
3. Are these barrels customizable in any way? I'm interested in fluting options and finish options like bead blast and Cerakote.
1) Yes, it's in the works currently. We have a couple prototypes being shot now and I'm gathering final data on them. The performance is impressive, the best thing you can do is get an adjustable gas system on the gun (key or block). We are also working on 22ARC with a SAAMI throat as well as a short (Wylde) throat for using light bullets and a thermal.
2) The 16" is 2lb 3oz ready to install on the upper.
3) The barrels can be spiral fluted and cerakoted to spec, we aren't doing straight fluting them at this point because it saves so little weight and the fixture is better setup for doing spiral work.
Here's the IG post I made showing off the spiral fluted bid sample for a contract.
Thank you @bohem.
Would you happen to know the weight of the 16” with the spiral flutes?
Also, how much extra does the fluting and Cerakote add to the $400 base price?
Last question, can you do a media blasted finish instead of the Cerakote?
Spiral Fluting the 16 cuts 3.5oz
Fluting and cerakote are $250 together
We only offer Bead Blast and Clear, not a basic blast only. The clear cerakote keeps the blasted finish looking nice much longer.
@bohem - I’d love to hear your thoughts on fluting and it’s effects on accuracy (or lack there of) for your Osprey barrels. I’ve read that fluting should be avoided with button rifled barrels because it can induce additional stress in the metal that can cause changes in the bore diameter. But it sounds like you’ve got special manufacturing processes with these Osprey barrels so maybe the “don’t flute buttoned barrels” belief is completely irrelevant for your barrels?
"Dont Flute Button" falls under the end result of "buttons have extra stress" which is an offshoot of the button vs. cut argument.
If the barrel isn't properly stress relieved it doesn't really matter what kind of rifling it has you're very likely to get problems when fluting, contouring, or getting it hot while shooting.
We haven't seen our fluting cause a problem in anything on the Ospreys which I am pretty convinced has to do with the stress relieving steps we take on the barrels.
