-
Having trouble using the site?
Contact support
Accessories Garmin Xero C1 chrono mount $38 shipped
- Thread starter Keith Johns
- Start date
Got mine yesterday took it to a match today and 3 guys used it. Awesome quality. Thanks for the great product at a great price
Some new pics
Picture shows the Garmin in the center of its travel range left and right. It has about 3/4” of side to side adjustment. Tighten that D-ring bolt down tight. Use a coin or screw driver, and just leave the Garmin attached to the mount. The mount attaches to the Garmin tripod and it’s the perfect combo.
I got mine in the mail today, looks great! Fast shipping and very easy to order. Thought I'd add a few photos as none of my guns have arca but I have an arca to picatinny QD adapter that seems like it will work great for this so I can easily put it on any gun with a picatinny rail. This was about $30 on Amazon but you can get them cheaper if you don't get the QD type. Also picked up this cheap case that arrived today that this mount fits in perfectly with the Garmin, seems like it should be a great easy to use setup.
Attachments
Guys the D-ring 1/4x20 bolt that screws into the Garmin is tight in its slot(the slot in the mount, to make it width adjustable). It’s that way on purpose.
Last edited:
Received mine today, fits perfectly on my rail. Can't wait to get out and shoot now and not worry about the muzzle break blowing the Garmin off of the bench!
Works on a green rimfire, works great and looks even better on a pink one!
Took it to the range this morning.
I’ve attached mine all the way back at the mag well. It recorded the 10 or so shots I fired.
And my barrel is 1.300” for 5” then gradual taper to 1” at 26” muzzle with a huge brake. So it as big and in-the-way as it gets.
Just a reminder, if anyone has any issues I’ll send out another for free.
I haven’t had one break, or anything major, but it’s not impossible that one could slip by me that’s less than it should be. I test each one after assembly by actually mounting it and visually inspecting it, and I’m not selling a ton of these so quality control is easy, but hey I’m only human.
If you receive one that just isn’t feeling or looking right, let me know what’s wrong and I’ll send you another one free.
I haven’t had one break, or anything major, but it’s not impossible that one could slip by me that’s less than it should be. I test each one after assembly by actually mounting it and visually inspecting it, and I’m not selling a ton of these so quality control is easy, but hey I’m only human.
If you receive one that just isn’t feeling or looking right, let me know what’s wrong and I’ll send you another one free.
Sorry, is it “mint” the color of pictures can be deceiving. MPA had mine listed as “Prison Pink”, I get a lot of comments from folks, but it shoot!
I got some much larger thumbwheels for these(almost 1” diameter!). I’ll post pics soon.
The larger thumbwheels are easier to get more leverage with, but it really isn’t necessary. I still prefer the normal thumbwheel/knob, but for guys that want the larger knob it’s now available.
Remember these have a free replacement warranty if anything breaks on it. Please don’t take a hammer to it… that’s about the only thing that would break one. But life happens and if ya run it over with your truck or something I’ll happily send you a new one.
$38 for one mount, shipped. Or just $60 for two mounts shipped!(give one to a buddy)
The larger thumbwheels are easier to get more leverage with, but it really isn’t necessary. I still prefer the normal thumbwheel/knob, but for guys that want the larger knob it’s now available.
Remember these have a free replacement warranty if anything breaks on it. Please don’t take a hammer to it… that’s about the only thing that would break one. But life happens and if ya run it over with your truck or something I’ll happily send you a new one.
$38 for one mount, shipped. Or just $60 for two mounts shipped!(give one to a buddy)
Last edited:
Here’s some comparison pics of the larger knob option. The smaller knob is the original that everyone has gotten so far, the larger one is the new option.
www.phoenixcustomrifles.com
www.phoenixcustomrifles.com
Last edited:
Shipped out a couple more last week and I can’t thank you guys enough. I had a lot of fun, and learned a lot, making these and I’m selling just enough of them to cover the costs of this CAD/printing endeavor.
They’re still $38 shipped. (So shipping is included).
Or $60 gets you two of them(shipping included!). Split it with a buddy!
www.phoenixcustomrifles.com
They’re still $38 shipped. (So shipping is included).
Or $60 gets you two of them(shipping included!). Split it with a buddy!
www.phoenixcustomrifles.com
Last edited:
Any way to integrate a picatinny clamp in with the arca, like RRS does? Might have to make the clamp taller to fit the pic part
Yes I can redesign them to also work with picatinny, but the ones I have now only work with ARCA.
This is the one I've been using from Amazon, it's great. Fits the Garmin with the tripod and this Arca adapter, not room for much more but that's perfect for me.
I’ve been using a Pelican 1120 case which holds my Garmin, the tripod it came with, this mount, and the charging cable, with extra room for a note pad or something. A guy could use a smaller case than the 1120 though, I'm using it cause I had one laying around.
I might have a picatinny only version ready to ship next week if anyone wants those.
I made a picatinny version and am printing the first finished version now. I expect to have them ready to ship in a few days.
They are picatinny only and will not work with ARCA.
They’ll also be $38 shipped. Free replacement warranty if they fail or break in any way… none have broken.
Thanks!
They are picatinny only and will not work with ARCA.
They’ll also be $38 shipped. Free replacement warranty if they fail or break in any way… none have broken.
Thanks!
The picatinny only version is ready to go.
All orders have been getting shipped within 24 hours.
Thanks!
All orders have been getting shipped within 24 hours.
Thanks!
In for PCR hoodie. Please pick a good soft one, I’ll free advertise every day for you.
I hope it comes in black
Yes they’ll always be available. I keep them premade and ready to ship.
Sorry I’ve been sick for a week and haven’t really been on Snipershide.
Reminder, if one ever breaks or fails in any way I’ll replace it for free. Or if it just doesn’t feel great, I’ll send you a replacement. Haven’t had any break or fail.
Still $38 shipped for one, or $60 shipped for two.
Original and larger knob sizes available on the clamp bolt.
Picatinny version is available but I don’t keep them premade. Only takes me 15 minutes to build though. They’re 3 hours to print but I keep all versions preprinted so I should still be able to ship picatinny mounts same or next day. The picatinny mount will technically fit ARCA rails, but don’t do it. It overextends the clamp far too much. Most stocks I see don’t have a long enough picatinny rail to use a mount and their bipod at the same time. Keep that in mind.
Thanks!
Last edited:
