That works. Use your knuckles and tap just like you’re knocking on a door and knock on the wall. You will hear the sound difference then go from there.
Tell me they didn’t put any rebar or wire mesh in it without telling me they didn’t put any rebar or wire mesh in it.. Two years ago my nextdoor neighbors had their old asphalt driveway redone with concrete. I watched the whole process and it was the same thing, there’s areas where it’s not very thick, it has no footing, and no mesh or rebar. They over vibrated it on one section and top flaked off the first winter. They sold it the next summer and it’s someone else’s problem now. They also just eyeballed the forms, I mean who uses a transit and level these days to set slope and drainage
. No pride in workmanship any more.
Can't use MOA in a Mils shower.
FINALLY! Someone with a brain posted this. I've owned one for years. Not only will the device tell you where the stud is, it will shows you the beginning and the end of the stud width wise as you pan the device sideways along the wall.
In that case you take a 12" sds drill bit and drill all the way through. Take some marinetex and anchor at least a 2" stainless fender washer to the outside. Take a stainless bolt and torque it down to 20ftlbs. Don't forget the loctite 272 (permatex equivalent fine, not rocksett). Slipperiness already taken into account for the torque.
Far enough into a thread we assume you have at least the level of intelligence to watch a This Old Tony video and be able to tell the BS.
www.snipershide.com
Just finished a reno on a rental office I needed to upgrade. It has been the victim of a few ad-hoc updates over the decades. 16”, 24” and for some damn reason a couple 13.5”.
. Pretty much, but now we are talking about how no one in concrete has any pride of workmanship any more and I’m sure if you wait long enough someone will be along to brag about their bow kills and how much they bench. Just grab some popcorn 
and relax.
With today's fiber mesh, a lot of structural engineers are eliminating reinforcing steel in flat work. I have a $50MIL project going on right now and all the slab on grade is absent of reinforcing steel. I'm not using that method on anything I do, but I wouldn't call it comical.@KYAggie
The concrete crew has been across the street for about 45 minutes.
The pump has arrived, but no concrete truck.
Still no rebar or wire mesh.
I'm pretty sure you called it.
On another comical note. The woman directly across the street from him has her white Christmas tree up in her front window.
At night, when it's illuminated, it looks like a KKK member.
She's black...
This. Hell it even has the word dry right there in it to tell you don't do it.
God damnit i gave a really wrong answer!
