Brand new to reloading. I’m having issues with light primer strikes. I thought it was related to primer seating depth which i’m working on. This round ( the first photo) got stuck and had to be tapped out with a rod. So i tracked down a case gauge and perhaps the new brass isn’t quite to spec. The brass sits down and is not flush.
Most of them 90% (second photo) seem fine.
My Process:
New Starline 223 Brass
Run - neck expander mandrel
Prime - BR-4
Powder - Varget
Seat bullet - 80.5 Berger
Is this common with Starline brass? Other brass?
Is there a way to fix this on the brass that is too short?
Thanks
Newbie reloader.
Most of them 90% (second photo) seem fine.
My Process:
New Starline 223 Brass
Run - neck expander mandrel
Prime - BR-4
Powder - Varget
Seat bullet - 80.5 Berger
Is this common with Starline brass? Other brass?
Is there a way to fix this on the brass that is too short?
Thanks
Newbie reloader.