I have recently switched to 6.5 PRC (and also have a 7mm WBY). With the larger jaw on the Coax and the "spreader" screw set all the way in, I can barely insert the case head, and have to manually open the jaw further to remove the case. Not only is this a pain, I am worried it may cause misalignment. Is there a solution to this?
Forester CoAx and magnum/PRC cases
- Thread starter NateAdams13
- Start date
1. Check that you are using the correct side of the jaws. The 'large' side of the 'standard' jaws should handle most regular magnums, at max spread.
2. If that doesn't work, there is a second set of jaws available, ie 'LS'. Usually it's just for really teeny (Hornet) and really big (338LM) case heads.
2. If that doesn't work, there is a second set of jaws available, ie 'LS'. Usually it's just for really teeny (Hornet) and really big (338LM) case heads.
I’m dumb. I had the jaws flipped around so the inlet hole from the screw was on the wrong side. Flipped it around, adjusted the screw up and it’s totally fine. Learn from my error lol
Ah. Yeah, that's fucked me more than once over the years. Seems like I change jaws around just infrequently enough to where I forget about it biting me *last* time...
Similar threads
