-
Having trouble using the site?
Contact support
How to Pair and Use a Kestrel with AB Quantum
- Thread starter DocUSMCRetired
- Start date
View attachment 8600430
When searching/connecting to a Kestrel 5700 Elite, it shows device type as RANGEFINDER instead of "Kestrel Weathermeter"
When searching/connecting to a Kestrel 5700 Elite, it shows device type as RANGEFINDER instead of "Kestrel Weathermeter"
It is just a naming nomenclature. This will change in our next minor bug fix. That's why the video appears different. It will not affect how the app performs.
My Kestrel 5700 Elite connects via Bluetooth with the app, but the pressure, humidity, and temperature values do not update when I click on the device buttons. I also tried reinstalling the app.
Another Potential bug report -
Profiles -> Receive -> Syncing Profiles Please wait... - stalls indefinitely
No issues with Sending profiles. Sync and profile transfer starts immediately.
App Build - 3.2.1, Build 441
Kestrel Firmware - 1.53
Connection - PC/Mobile, Privacy PIN - OFF
Profiles -> Receive -> Syncing Profiles Please wait... - stalls indefinitely
No issues with Sending profiles. Sync and profile transfer starts immediately.
App Build - 3.2.1, Build 441
Kestrel Firmware - 1.53
Connection - PC/Mobile, Privacy PIN - OFF
Kestrel mode PC/Mobile. Firmware 1.53
As shown in the photo, the Kestrel is connected (Bluetooth on and live environment), but it is not reading data from the Kestrel 5700 Elite. When you press the device buttons, the same values always appear: 15°C, 50%, and 1013 mbar. Wind speed and direction are also not updating.
I had the same problem with profiles not loading nor uploading. It just stalled downloading and uploading showed it did something but kestrel never knew about it.
The quantum also had used 1.4GB of data.
I reinstalled it and in short order it had used another 500MB of data.
All foreground, background data was few KB.
I uninstalled it for now.
The quantum also had used 1.4GB of data.
I reinstalled it and in short order it had used another 500MB of data.
All foreground, background data was few KB.
I uninstalled it for now.
Attachments
I had the same problem with profiles not loading nor uploading. It just stalled downloading and uploading showed it did something but kestrel never about it.
The quantum also had used 1.4GB of data.
I reinstalled it and in short order it had used another 500MB of data.
All foreground, background data was few KB.
I uninstalled it for now.
The quantum also had used 1.4GB of data.
I reinstalled it and in short order it had used another 500MB of data.
All foreground, background data was few KB.
I uninstalled it for now.
Last few days the Kestrel 5700 I have has been pairing just fine, but yesterday the data from the Kestrel does not seem to be relayed correctly to the app, it shows 59degrees, 50% Humidity, and 29.92 pressure no matter what when I hit the device icon below the fields.
Try changing your battery in your Kestrel.
Also make sure pin mode is always off for use with the app.
Try changing out your battery.
The app has over 700 reticles now. Which requires a bit of downloading as you can imagine. We asked the manufacturers to send us high quality where possible reticles and many of them did.
- Is your app up to date?
- Version 3.2.3 on iOS and Android are the latest.
- Do you have the PIN feature turned off?
- Is Bluetooth set to PC/Mobile?
Both, depends on your Hardware.
App did not show an update available, however when I went to the app store I was able to upgrade to 3.2.3 on my iphone.
Kestrel 5700SL firmware is 2.17
Pin is disabled, connection is PC/Mobile.
App still defaults to 59degrees, 50%humidity, and 29.92 pressure when I press the device icon before the value.
FYI
Kestrel 5700SL firmware is 2.17
Pin is disabled, connection is PC/Mobile.
App still defaults to 59degrees, 50%humidity, and 29.92 pressure when I press the device icon before the value.
FYI
I'm sure about everyone else but the "AB Ecosystem" seems to be a hot mess...
I have AB Quantum (Pro Subscription) Elite License, Kestrel 5700 Elite Link, Sig Kilo 10K (gen1), and a Garmin Tactix 7 Ballistic edition.
All apps and firmware are up to date.
My experience so far.
1 - Create profiles in AB Q - get profiles tuned to known shooting parameters and solutions look good.
2 - Send Profiles to Kestrel - all appears good (Caveat- when receiving profiles from Kestrel and they never show "sync'd")
3 - Send Profiles to Garmin Watch - Sometimes it works and sometimes it doesn't. Rarely does it send all of the profiles I have marked to sync. Sometimes I get a message that says I can only send 5.
4 - Send Profiles to Sig 10K - Profiles upload but seems data is lost somewhere, somehow. After Uploading to Sig Profile selected, Sig in BDX-E(lite) mode. Using a 22LR Profile that is MV 1085fps I get a solution (that isn't correct) out to about 115 yards and after that I get 0.0 for elevation for any other further yardage.
5 - I called Sig - spoke to two Techs - Both say AB Quantum is not compatible with Sig Kilo 10k or any other products. Only Kestrel and Garmin 701.
6 - Now, I removed/forgot/disconnected my Sigs from AB Q and when trying to reconnect I do not get the two-digit pin to reconnect. Profiles are not uploading to my watch, and the Kestrel is still telling me profiles are sync'd when sending them to the Kestrel but not receiving them from.
7 - Referring back to 4, when I used the clone profile in the Sig BDX App and sync'd it/them with the Sigs all went back to normal on the Sigs.
8 - Sync'ing, so when I sync my Kestrel and all appears good, I disconnect from it and sync my Watch and all appears good, I go back to the Kestrel and all of the Profiles indicate that they are not sync'd. Then disconnecting the Kestrel and going back to the watch, the Profiles are no longer sync'd with that device.
I have talked to Doc, Sig Tech(s) No help there, and AB Support.... As of this writing I have no solutions to any of the above other than having each device as a standalone unit.
Note - I may have missed something up in there, but I tried to cover it.
I have AB Quantum (Pro Subscription) Elite License, Kestrel 5700 Elite Link, Sig Kilo 10K (gen1), and a Garmin Tactix 7 Ballistic edition.
All apps and firmware are up to date.
My experience so far.
1 - Create profiles in AB Q - get profiles tuned to known shooting parameters and solutions look good.
2 - Send Profiles to Kestrel - all appears good (Caveat- when receiving profiles from Kestrel and they never show "sync'd")
3 - Send Profiles to Garmin Watch - Sometimes it works and sometimes it doesn't. Rarely does it send all of the profiles I have marked to sync. Sometimes I get a message that says I can only send 5.
4 - Send Profiles to Sig 10K - Profiles upload but seems data is lost somewhere, somehow. After Uploading to Sig Profile selected, Sig in BDX-E(lite) mode. Using a 22LR Profile that is MV 1085fps I get a solution (that isn't correct) out to about 115 yards and after that I get 0.0 for elevation for any other further yardage.
5 - I called Sig - spoke to two Techs - Both say AB Quantum is not compatible with Sig Kilo 10k or any other products. Only Kestrel and Garmin 701.
6 - Now, I removed/forgot/disconnected my Sigs from AB Q and when trying to reconnect I do not get the two-digit pin to reconnect. Profiles are not uploading to my watch, and the Kestrel is still telling me profiles are sync'd when sending them to the Kestrel but not receiving them from.
7 - Referring back to 4, when I used the clone profile in the Sig BDX App and sync'd it/them with the Sigs all went back to normal on the Sigs.
8 - Sync'ing, so when I sync my Kestrel and all appears good, I disconnect from it and sync my Watch and all appears good, I go back to the Kestrel and all of the Profiles indicate that they are not sync'd. Then disconnecting the Kestrel and going back to the watch, the Profiles are no longer sync'd with that device.
I have talked to Doc, Sig Tech(s) No help there, and AB Support.... As of this writing I have no solutions to any of the above other than having each device as a standalone unit.
Note - I may have missed something up in there, but I tried to cover it.
Strangely enough for me, the integration with the Kestrel worked well when they rolled it out, other than not being able to be connected at the same time as the LRF to the app, which I was told was due to how Kestrel bluetooth communications worked, and would need a change on the Kestrel side before it could happen.
Something in the recent updates stopped it from working for me, which I am sure (I hope) will get tracked down soon.
Something in the recent updates stopped it from working for me, which I am sure (I hope) will get tracked down soon.
The Kestrel integration seems to work the best of all of the devices so far. My only issue with it is that the Profiles indicate that they are not sync'd when receiving the profiles from the Kestrel. I think if the Kestrel was the only device I was using that it would not be an issue.
Bug/s report -
App Build - 3.2.5, Build 447
Kestrel Firmware - 1.53
Connection - PC/Mobile, Privacy PIN - OFF
This bug appeared only on profiles that were received from the Kestrel, despite the Eunit and Wunit for these profiles being set to mil in the Kestrel 5700 Elite Ballistics. I have not been able to recreate these issues in any profile created through the AB Quantum app.
Profiles ->Scope -> Scope Units - any changes made to scope units do not save properly. Seems to want to either default to MOA most of the time. Profiles that were properly received in MRAD will default to that despite changing to something like 1/10 MRAD Clicks
On random occasions, profiles that were received will have weird mismatched scope unit solutions when scope units are changed.
Examples in pics, where the scope unit was changed from MRAD to 1/10 MRAD Clicks or changed from MOA to 1/10 MRAD Clicks and the units for the solutions are mismatched.
These bugs still appear after restarting the app after saving scope unit changes.
App Build - 3.2.5, Build 447
Kestrel Firmware - 1.53
Connection - PC/Mobile, Privacy PIN - OFF
This bug appeared only on profiles that were received from the Kestrel, despite the Eunit and Wunit for these profiles being set to mil in the Kestrel 5700 Elite Ballistics. I have not been able to recreate these issues in any profile created through the AB Quantum app.
Profiles ->Scope -> Scope Units - any changes made to scope units do not save properly. Seems to want to either default to MOA most of the time. Profiles that were properly received in MRAD will default to that despite changing to something like 1/10 MRAD Clicks
On random occasions, profiles that were received will have weird mismatched scope unit solutions when scope units are changed.
Examples in pics, where the scope unit was changed from MRAD to 1/10 MRAD Clicks or changed from MOA to 1/10 MRAD Clicks and the units for the solutions are mismatched.
These bugs still appear after restarting the app after saving scope unit changes.
Last edited:
To fix this. Pull the battery out of the Kestrel while holding the power button for 10-15 seconds. Then reinsert the battery, disconnect it, and reconnect it to the app in the devices menu. This should get the Kestrel transmitting enviro data again.
See my above message. We have found that when they stop transmitting data or the connection won't stabilize the battery in the Kestrel needs to be pulled out while holding the power button, then placed back in. It is important to note, the Kestrel doesn't entirely turn off when you power it down. It continues to read and collect enviro data to an extent. So pushing the power button alone is not enough, you need to pull the battery while you do it restart it.
I will document this so we can look at it.
Thanks Doc, that worked perfectly, and the app is now getting the correct data from the Kestrel.
Any idea what it would take to have the LRF and the Kestrel both connected and streaming live data at the same time? I know I was told something about how the communication is handled on the Kestrel side, is this something that we could request as users from the Kestrel manufacturer?
Any idea what it would take to have the LRF and the Kestrel both connected and streaming live data at the same time? I know I was told something about how the communication is handled on the Kestrel side, is this something that we could request as users from the Kestrel manufacturer?
Not really as this is partly a limitation of Android devices and iOS devices as well. This is already on our radar and we are discussing it.
I spoke with Kestrel today about my 5700 Elite and the Kestrel App having communication issues. The rep indicated that they have seen a few devices that have been experiencing the same issues I am having. Profiles with not sync between the device and the Kestrel Link App. I provided him with information and he said they are working on a fix.
I still have the issues with the Sig 10Ks not providing good data after sync'ing AB Q with them. My Garmin watch is hit or miss when sync'ing profiles
Either way, no matter what device I sync, as soon as I sync another device and go back to the original AB Q tells me my Profiles are not sync'd.
I still have the issues with the Sig 10Ks not providing good data after sync'ing AB Q with them. My Garmin watch is hit or miss when sync'ing profiles
Either way, no matter what device I sync, as soon as I sync another device and go back to the original AB Q tells me my Profiles are not sync'd.
Is this to take the place of the Kestrel LiNK Ballistics app? I don’t know if I see the point of pairing the phone and Kestrel aside from pulling environmentals from the Kestrel to the app.
No. You still need KLB for Sectors and for Firmware updates. Quantum won't do those. Quantum also will not re-name the device.
Ok. What exactly is the point of pairing the phone and Kestrel? I get the app can import environmentals but at that point why not just use the kestrel? Seems redundant unless I’m overlooking something.
- You can live stream from the Kestrel, including wind.
- It will change the license from Ultralite to Elite or Pro (model dependent) for free.
- You can create and upload profiles or download profiles from the Kestrel.
- You can then share those profiles with co workers, friends etc via QR code for their app or devices.
- You can send those profiles to other compatible devices to share them across multiple devices.
- AB Quantum can act as a remote view HUD for a Kestrel in a Wind Vane Mount.
Similar threads
