New Winchester 52D

Calfed

Private
Full Member
Minuteman
Dec 3, 2009
530
731
This has been quite a fruitful month for me with respect to Target .22 rifles.

In addition to a Remington 40XB, I also got this Winchester 52D. It is US marked and supposed to include the CMP certificate. Also came with a set of Redfield Olympic sights and a hand stop.

Stock is a little banged up, but the price was good.

Cvnx54J.jpg


MkxLndt.jpg
 
I’ve been down the same road! Lol
Purchased a super clean 52d from a young man that his father had passed and he was selling off his guns.
Only complaint I have on the 52 is the trigger is a little stiff. But man it is very accurate with RWS ammo.

So then I ran across a 40x for sale. Purchased it at another good price but found out it wasn’t in as good a shape as the 52. Accuracy was worse than poor.
40x went down the road. Found a gentleman that wanted the action to build a bench rifle off of. Sold him the whole rifle.
 
  • Like
Reactions: Calfed
You can probably just remove from stock and dunk entire action in some solvent for 24-48 hours. Then flush throughly with break cleaner and apply light oil. No need to remove frim action.

If you don’t mind please post results.

Those 52D triggers are really sought after for installation on C repeater actions. Sterling reputation.
 
  • Like
Reactions: Calfed
Thanks for the great idea, I’d rather not remove trigger if I don’t have to. We have gallons of naphtha at work so may try some of it instead of carb cleaner.

Yes sir I will post results.

Didn’t some of the early D rifles come with the C trigger?
 
  • Like
Reactions: Calfed
You can probably just remove from stock and dunk entire action in some solvent for 24-48 hours. Then flush throughly with break cleaner and apply light oil. No need to remove frim action.

If you don’t mind please post results.

Those 52D triggers are really sought after for installation on C repeater actions. Sterling reputation.
Here are some pics of my trigger
 

Attachments

  • IMG_5465.jpeg
    IMG_5465.jpeg
    547.6 KB · Views: 66
  • IMG_5466.jpeg
    IMG_5466.jpeg
    640.2 KB · Views: 67
Thank you.
I do not know about C triggers in D’s. Nothing mentioned in Houze book.
Would not surprise me either way.
I have very little experience with D&E models.
 
1727124170206.png

1727124240170.png


Look at the first picture , the size of the gap on the right side , compare it to yours , look at the pin locations , you should be able to see is your have a c or d trigger
 
I have never wanted a D trigger in my C’s.
The C trigger can be set to far lighter pull weight than I require. I perceive zero vibration or over travel. I need nothing more, or less..
 
  • Like
Reactions: d_dial
Got into my FFl to start the paperwork on the 52D. The metal is in fine shape and the stock doesn't look too bad.

It is in his safe now for the 10 day "cooling off" period. Better pics when I've "cooled off"
 
  • Like
Reactions: d_dial and RTH1800
Finally scoped my newest Winchester 52D. I used a Redfield 3200 24X that has internal adjustments, but is long and mounts on the Unertl -style mounting blocks.
1aSlQUW.jpg

n7NLQxQ.jpg


Made a quick trip to the range to sight it in. There was a left to right breeze, which I made one pathetic attempt at compensating for (the hole at 10 o'clock), but then just shot for the bullseye to see what kind of "waterline" the rifle would shoot with the Eley black box ammo.

7 rounds @50 yards

wpOJXtD.jpg