For sale is a barreled action Stiller Tac30 + 18" PVA Osprey 223AI. The barrel was cut to run an AEM5/OCM5. I have both an OpsInc muzzle brake and Otter Creek Flash hider I can sell with the setup (Surefire Closed Time not included).
I will include a metal 223 x10 round Accurate AICS magazine. It shoots 80gr ELDM at 2800fps and that is with a very low charge of Varget for a 223AI. Fireforming loads with 77 SMK and 8208 shoot sub 1/2 MOA as well.
The action has about ~4000 rounds on it and is on its 3rd barrel which has about 500 through it. It is ridiculously smooth.
I have x40 fireforming rounds (new brass) and x136 loaded 80 ELDM rounds in full prepped brass (annealed, trimmed, etc). All with Winchester 223 brass.
I have the following reloading components to bundle for the buyer:
-49 pieces of 223AI fireformed Winchester Brass with mixed firings and loosening primer pockets (good for load development)
-47 pieces of Lapua 223AI fireformed brass (mixed firings)
-38 pieces of once fired after it's last full prep of 223AI fireformed Winchester brass
-38 pieces of once fired for fireforming Lake City 223 brass (now fireformed)
-Redding 223AI bushing full length sizing set with the appropriate bushing for 0.002 of neck tension
-Redding Competition 223AI Seating Die
Barreled Action+Mag+Ammo for $1500 shipped. Add $75 per muzzle brake.
With the brass and dies included add another $250.
I will include a metal 223 x10 round Accurate AICS magazine. It shoots 80gr ELDM at 2800fps and that is with a very low charge of Varget for a 223AI. Fireforming loads with 77 SMK and 8208 shoot sub 1/2 MOA as well.
The action has about ~4000 rounds on it and is on its 3rd barrel which has about 500 through it. It is ridiculously smooth.
I have x40 fireforming rounds (new brass) and x136 loaded 80 ELDM rounds in full prepped brass (annealed, trimmed, etc). All with Winchester 223 brass.
I have the following reloading components to bundle for the buyer:
-49 pieces of 223AI fireformed Winchester Brass with mixed firings and loosening primer pockets (good for load development)
-47 pieces of Lapua 223AI fireformed brass (mixed firings)
-38 pieces of once fired after it's last full prep of 223AI fireformed Winchester brass
-38 pieces of once fired for fireforming Lake City 223 brass (now fireformed)
-Redding 223AI bushing full length sizing set with the appropriate bushing for 0.002 of neck tension
-Redding Competition 223AI Seating Die
Barreled Action+Mag+Ammo for $1500 shipped. Add $75 per muzzle brake.
With the brass and dies included add another $250.
Attachments
Last edited:
