Weird Eley Match Lot#

drglock

Old fat guy
Full Member
Minuteman
Supporter
  • Jan 13, 2012
    2,089
    2,576
    Morrison,Oklahoma
    Put a new CZ457 together with a Brux barrel and MDT chassis. Been going through different ammo to get a feel for what it liked. It seems to really like the Eley Match so I ordered 8 lots. All of them overall shot really good but found one lot that shot exceptionally well with a velocity range I liked with low SD’s.
    So I ordered 3000 of said lot and when it comes in I go to shooting it. Shoots really well but here’s the odd part. It’s actually two different lots. The lot I tested and part of the lot I ordered match up perfectly. Average velocity of 1091fps and SD 4-5. The second lot within this lot has an average velocity of 1111fps with an SD of 6. So far I’ve tested 18 boxes and they two lots are about 50/50. You can test a box and the whole box will be one or the other with SD’s being right at what I posted above. I’ve been in the competitive 22 for a long time and I’ve seen a lot of things but never anything like this. Not going to be that big of a deal but will have to go through every box and chrono and mark that box as one or the either. 🤷
     
    You are a bit more easygoing than I am. If this happened to my ammo that I was paying $20 a box for I'd be on the phone demanding a whole new batch from Eley. If I'm paying that much I expect it to be as perfect as it can get and hassle free.
     
    Same lot number?
    20 fps difference in average velocity? 1.8% of MV?
    At 50 yards the difference in poi would be about 0.14 inch of vertical.
    Edge of a 22 would still score the 10, right?

    I'd be happy to find a lot that had that small a variation in mv's.
    Unless it's spitting odd strays due to other cartridge issues. :unsure:
     
    The velocity differences aren't a surprise.
    When the factory labeling process is based on statical sampling,
    management establishes acceptable defect rates,
    defect levels, level of confidence to be applied to establish the sample size.
    Profit is job one, expense kept to a minimum,
    so 400 shots are all that are actually fired to label a batch of 28,000 cartridges.
    That leaves room for less than stellar quality product to slip by.

    Welcome to the assembly line lottery.
    We pays our money, we takes our chances. ;)
     
    The velocity differences aren't a surprise.
    When the factory labeling process is based on statical sampling,
    management establishes acceptable defect rates,
    defect levels, level of confidence to be applied to establish the sample size.
    Profit is job one, expense kept to a minimum,
    so 400 shots are all that are actually fired to label a batch of 28,000 cartridges.
    That leaves room for less than stellar quality product to slip by.

    Welcome to the assembly line lottery.
    We pays our money, we takes our chances. ;)
    Yes but you would think that it would be all mixed in on the boxes not whole boxes with identical different lots. It’s almost like two different lots got mixed after they were boxed but before being labeled