• Get 30% off the first 3 months with code HIDE30

    Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.

    Subscribe

  • Having trouble using the site?

    Contact support

Search results

Search the forum Search Articles
  1. A

    Reloading Equipment Hornady Bullet Feed Dies; Redding G-RX

    Hello, is the G-RX kit still available?
  2. A

    Gunsmithing Bushing bolt and turning pin

    I sent my .308 bolt to Greg Tannel, Gre-tan rifles. He did a great job, and was pretty quick as well. Lighter pin assembly as well, and a pleasure to deal with.
  3. A

    Load data for Berger's 185gr Juggs in a 308 win?

    kujuak, have you tried and seen a difference between standard and magnum small primers in the Palma brass?
  4. A

    Random color change from annealing?

    When I was using dry lube, I just put them back in a box and loaded as needed, but the dry lube isn't quite enough, I'm getting heavier marks when sizing, so I'm back to paste lube and re-tumbling for now.
  5. A

    Random color change from annealing?

    Yes, he has the green tempi lac, I'm pretty sure it's 750. I was thinking surface chemicals too, maybe old case lube or cleaner. It was like 5 pieces out of 200.
  6. A

    Loads 178 BTHP vs 178 ELD-M vs 175 RDF

    I love the 2000MR in my Rem 5R (24"), but it is a little more temp sensitive than Varget. I use more of it than varget for a 175, almost 3 gr, but I get about 100 more fps out of it and have it pretty accurate at about 2750fps. On initial testing I got them over 2800 without issues, but the...
  7. A

    308win-175 SMK "tactical tips" & Berger 185 Juggernaut's AR10 semi auto

    You might get the Juggs to fit and work, I seat them at 2.208" ogive in my Rem 5R, but I'm betting the tipped 175's will be too long. Previous post nailed it, make some dummies, and/or do some measuring and eyeballing of the slugs next to a case and a mag.
  8. A

    308 : Switching to the 168 ELD-M bullet

    They'll seat differently than the BTHP bullets, but should be about the same as AMAX. That's what my pal noticed when he loaded some 178's.
  9. A

    Rifle Scopes Mount height for a Bushnell DMRIIi 3.5-21x50

    I have Seekins rings for my DMR, on my Rem 5R, but I can't remember the height. I want to say low mount, I only have like .25" clearance from the barrel. Seekin's site shows .92" for low mount, and they have a 1.45" for "AR high" mount. With a continuous rail, something in that range is probably...
  10. A

    Random color change from annealing?

    I annealed 200 rds of Lapua .308 brass on my pals Annealez machine the other day, seems to work great. My question for everybody is, that a handful of them showed a bunch of pink coloring halfway down the case, where most of them had the typical light coloring at the neck and shoulder. Does...
  11. A

    75 ELDM and 178 ELDM, thoughts and questions

    I was told by a close source that the 73 was created to fit in AR mags better. The 75's can fit, but you lose some flexibility with seating depth for load development. I have some 178's for my 5R, but haven't loaded them yet. My pal should have some of the 73's soon, if he doesn't already.
  12. A

    Load data for Berger's 185gr Juggs in a 308 win?

    I have a gen2 700 5R, and I got one pretty dialed. 46.8gr of 2000MR, bullet seated at 2.208 ogive, Lapua brass, and Federal 210M primer. I had tried seating them longer originally, but pulling them back tightened up the groups quite a bit, as well as the GM primers from CCI BR2's. I haven't...
  13. A

    185 Juggernaut + Power pro = awsome

    I too, am a fan of 2000-MR and the 185 juggernaut. I had it shooting well with BR-2's, but got some 210m primers recently and really got it to work. I shoot a Rem 5R, and have them running around 2650-2700, with very low SD's. My best was like 3-something.
Top Bottom
Back
Home
Forums
Merch
Alerts