Search results

Search the forum Search Articles
  1. Q

    Suppressors Light coat of oil?

    Dumb question. I was reading through the maintenance instructions for my suppressor it calls for a light coat of oil after use before storage. This is a welded suppressor. Do any of you do this and if so how do you get a thin coat on all the baffles with out having oil pool in the suppressor...
  2. Q

    Blowing primers at MINIMUM load?

    I have an LR-308B that does the same thing with factory ammo over 168gr and even some of the hotter 168gr as well (Hornady with 168gr amax). I've checked head space, cut off all gas so it wouldn't cycle and still never found a solution. Here is a link to the thread with some pics of my ammo. If...
  3. Q

    New GAP Custom 308 - Christmas came early

    Finally got out to the range this weekend. Life's been busy. Pretty happy with the results though. Here is a 10 shot group at 100 yards. Nosler 175gr custom comp factory ammo. One stray... I must have twitched.
  4. Q

    I need a name for a rifle action company. Help me and win.

    Meticulous Action and Rifle - M.A.R. Meticulous Action Forge - M.A.F. Exacting Master Actions - E.M.A Adamantium Actions OmegaForge Talon actions - rifles come in raptor names like Hawk, Eagle, Falcon, etc
  5. Q

    New GAP Custom 308 - Christmas came early

    Months ago, that said I provided the Jewell trigger, AICS stock, and the barrel. I had picked them up over the past year or so while I decided on a builder.
  6. Q

    New GAP Custom 308 - Christmas came early

    I put in an order for a custom rifle with GA Precision a few months ago and wasn't expecting it for a good while. But low and behold it came in today. GAP Custom .308 GAP Templar V2 action Jewell Trigger Bartlein #9 Contour barrel 26" 1-10 twist Threaded for suppressor AICS 1.5 FDE stock...
  7. Q

    LR-308 build and an ammo issue\warning

    Re: LR-308 build and an ammo issue\warning Zeroed in today with FGMM 168gr. I I had one stray I caused, but here is my best group of 7.
  8. Q

    New DPMS LR-308 24" question

    Re: New DPMS LR-308 24" question If you change the upper receiver to the FA type you would need to get a bolt carrier with the notches for it to work. Also the scope rail is taller on the slick side so watch your clearance if you use a large scope. Past that the free floating forearm screws...
  9. Q

    LR-308 build and an ammo issue\warning

    I got a new job and decided to celebrate by building a 308 AR variant. Here are the specs of my build: Started with a DPMS LR-308B Installed Geissele SSA trigger Magpul PRS stock BCM Gunfighter large charge handle ERGO Sure grip Spikes Heavy buffer and spring PRI Adjustable gas block YHM mount...
  10. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup 100 yards
  11. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup Finally got to the range and dialed in. Here is my best 5 of the day. Still need some work, but it is a start.
  12. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup Well I finally got everything in and together(a few things were on back order). I also got a stock bag, kick eez recoil pad, and once again changed the scope. I got a bit more cash so I ended up getting a Bushnell Elite Tactical 6-24x50 G2DMR...
  13. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup Considering everyone's advice, thinking realistically how far I will be able to effectively shoot for the next few years (I imagine it will take a good while to become proficient), and after reading a few more articles; I decided to changed my scope...
  14. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup I'll look more into the scope magnification, the one I ordered is on back order anyways so maybe I'll change it. I bought a muzzle brake so I won't be able to go to the range for a few weeks now. I know 300 win is more expensive, my issue with cost...
  15. Q

    Just getting started - here is my setup

    Re: Just getting started - here is my setup Thanks for all the comments so far. I'll look into getting a muzzle break for long sessions (or perhaps just to want to fire it at all if the kick is as bad with this rifle as people are warning me)..thanks for the suggestion. I probably should...
  16. Q

    Just getting started - here is my setup

    I decided to start getting more into precision shooting since general recreational target shooting is fast becoming my hobby (I have a NEF handi-rifle 223 that shoots surprisingly well that I have shot paper with over the past 5 years). I did a lot of reading here and other places before I...
Top Bottom
Back
Home
Forums
Merch
Alerts