Search results

Search the forum Search Articles
  1. C

    Spotters New Nightforce spotter.

    I think you have some numbers mixed up, probably comparing different distances and magnification. 100ft at 30x sounds like a 1000yd fov not a 100yd fov.
  2. C

    Spotters New Nightforce spotter.

    I have a Hensoldt spotter 60, and this nightforce. I never use the Hensoldt. Friends have borrowed it to RO more than I’ve ever used it. Time will tell if I use the nightforce. I feel like the nightforce is easier to transport and I definitely believe the nightforce is easier to use if...
  3. C

    Spotters New Nightforce spotter.

    It’s not the reverse, we’re saying the exact same thing as best I can tell from your illustration.
  4. C

    Spotters New Nightforce spotter.

    It definitely matters if the reticle is not centered in the scope, which is the case with the nightforce cfs. If the lrf is 3.5” above the center of the scope, and the reticle is below center, there will always be a crossing angle and only one range where the lrf beam is coaligned with the zero...
  5. C

    SAC Seating Die - real world experiences?

    Oh he mad. I know your post helped the OP immensely in his quest for knowledge about the seating die. I have four of these seaters. I’ve posted here before that THE seating die is one of the better products on the market, for the reason that the micrometer head generally is consistent in...
  6. C

    SAC Seating Die - real world experiences?

    That’s cool, I’ve never seen a seating die with a bushing or mandrel.
  7. C

    Spotters New Nightforce spotter.

    Resurrecting this thread with a legitimate question. Since the zero of the reticle (and for that matter, the top of the 5 mil vertical axis in the reticle) is below the centerline of the scope, how in the hell do people set up a LRF on the cage? If I coalign the LRF at 1000 yds to be on the...
  8. C

    Has anyone else found the Area 419 Zero Reloading Press Secret Accessory Primer Prison Pocket (A419 ZRPSAPPP)?

    I can ony guess you’re not talking about Mark Gordon “at Area 419” either. :/
  9. C

    Has anyone else found the Area 419 Zero Reloading Press Secret Accessory Primer Prison Pocket (A419 ZRPSAPPP)?

    I don’t think him and @flyer1a look alike, but who knows.
  10. C

    SAC Modular Sizing Die - Neck/Shoulder Bushing Measurement

    He’s taking your loaded round diameter (.338”) and subtracting a little more than .003” (the neck tension you indicated was desired) to account for spring back. So he says .338 minus .005 for a bushing of .333”. A .334 bushing would be ok also here in my opinion. For mandrel, similar math...
  11. C

    Giraud Cutter Head Holder / Canister - 3D Printed

    Looks like you have the printer dialed in pretty well. What printer and what filament?
  12. C

    Kei Trucks. Japanese utility trucks.

    If you were in Florida or south Alabama I could hook you up with a 1999 Mitsubishi with a PTO dump bed. Power steering and air (although the air needs to be serviced).
  13. C

    SAC Modular Sizing Die Disassembly Help

    I was just about to tell you to take a screwdriver and put it between the collet and and cone shaped tapered piece, and just turn the flat head screwdriver to pop that piece off. But you figured it out.
  14. C

    Kestrel, Trued perfectly to 700, then way high at 800 ///// SEE LAST POST

    Assumption, but he said he went to the “abc” range and of those the c range is the only one with 100 berms going out to 800. 👍🏼
  15. C

    Kestrel, Trued perfectly to 700, then way high at 800 ///// SEE LAST POST

    I gave the distance for the c8 target above. It’s not 775 unless he is shooting from a weird position on that range.
  16. C

    Sig Kilo 10K Gen 2

    95% seems kind of subjective, but I’m not going to argue with a numbers nerd. In my own subjective opinion, they’re “way less” blue than Gen 1. Left side isn’t blue at all.
  17. C

    Kestrel, Trued perfectly to 700, then way high at 800 ///// SEE LAST POST

    The c8 at Altus is pretty close to 806. c9 is more like 838. I’d delete the profile and start over. Zero at 100, put your mv in, and then true at 800+. Don’t futz with bc inside of 800, just mv. Published bc’s are pretty close now and inside of 1k or so they don’t need much adjustment at...
  18. C

    ZCO doesn’t keep zero

    Thermal shift, obviously.
  19. C

    Sig Kilo 10K Gen 2

    Glass seems better. Less blue obviously but I see more blue in the right tube than the left, which seems clearer. I’m sure someone will say it’s the coating, maybe it is. But, I also might be Sig’s first warranty claim. There is dust or some kind of aberration in my left tube about the 9:30...
  20. C

    Calypso ultrasonic wind meter

    Sounds like they need to allocate some engineering dollars to hire a legit app developer.
Top Bottom
Back
Home
Forums
Merch
Alerts