Search results

Search the forum Search Articles
  1. mark5pt56

    For the Love of God, GI Joe and John Wayne.... cleaning and abrasive cleaners

    I know I've done it multiple times with AR's. Stored muzzle down, lube migrates, I typically forget to swab out and the first couple of rounds will be slick with excess, never an issue. Yes, you should have a bore, chamber and bolt face free of fluids. On an AR15, you want lube on the lugs...
  2. mark5pt56

    Accuracy International AT-X

    Okie, going to be a 6BR, 26" 1.125 straight, 7.5 with Cortina V2 and Area 419 HFM. May just go right to 55. I will be using the identical reloading equipment, components and recipe as the builder uses the same to great success on his rifle.
  3. mark5pt56

    Accuracy International AT-X

    Manual states 49 inch pounds on the barrel lock screw. Getting ready to change a barrel, anyone have issues with loosening or barrel exhibiting better accuracy in the higher ranges, 55-65?
  4. mark5pt56

    AT-x--6BR magazines?

    Great! Yeah, went by the shop this a.m. and got the answer--Gray Ops, tks!
  5. mark5pt56

    Firearms BCM 16"MIDDY

    Very nice classic middy, all BCM other than the carry handle and Magpul stock. No issue with it, very clean maybe 1000 rounds if that. Includes med Gunfighter CH and 20 rd Pmag. *Carry handle sight zeroed and set up using the RIBZ. ***ONLY TO STATES THAT ALLOW THE RIFLE IN IT'S CURRENT STATE***...
  6. mark5pt56

    Reloading Equipment 168 SMK and 150 Hornady fmjbt bullets

    Cleaning up some extra's, they will fit into a small USPS Flat Rate and priced accordingly. As a note the Sierra's go at 45-49 per 100 plus tax and shipping. AVAILABLE-Sierra .30 168 SMK, 248 count-90 shipped *sold*Hornady .30 150 FMJBT-273 count-45 shipped USPS money order, check or...
  7. mark5pt56

    Tikka T3X Super Varmint-223

    Strange, never an issue with a Tikka feeding from a factory magazine, 4 calibers(3 .223) and multiple rifles. You can get a single shot follower from Mountain Tactical or make one out of kydex. You can also feed via a stripper clip, this was an old High Power shooter trick I was shown.
  8. mark5pt56

    Precision Rifle Gear New to nice bipods, looking at the Atlas BT64 LW17

    In my opinion with the intended role is to spend money on ammo, not a bipod for that platform.
  9. mark5pt56

    AT-x--6BR magazines?

    Looking at a 6BR barrel for the AT-x, just want to make sure I get this right. Do the Gray Ops AW 6BR mags work reliably in the AT-x? I do read there's a mag block kit(HRD?) but spotty reviews? Any other options for this rifle? Aside from bending lips and pushings rounds forward, etc. Let's...
  10. mark5pt56

    SOLD TRIAD STOCK PACK, AMMO STRIP AND RED TAC GEAR TOOL POUCH

    As new on these, as a set, includes the height adjusting strips. Multicam in case it wasn't obvious. 65 shipped USpS money order, check or zelle.
  11. mark5pt56

    Reloading Equipment HORNADY 6.5CM BRASS, 1X

    Hornady 6.5CM once fired, 220+ count. Since it will go in a med flat rate, will keep the boxed stuff intact. All together, 65 shipped. USPS money order, check or Zelle.
  12. mark5pt56

    SOLD Vortex 34mm 1.10 rings, like new

    Vortex, 34mm 1.10 Pro rings, used for a short time on a bolt gun, no issues, moved scope to AR. 55 shipped usps money order, check or Zelle.
  13. mark5pt56

    Optics AR15 cut carry handle

    Cut carry handle, sight wheel set for the 50 Santos IBZ. I cut, smoothed and refinished with aluma black. 70 shipped lower 48 usps money order, check or Zelle.
  14. mark5pt56

    SK S+ deviation / Rimfire

    OP, also-look at the shot list--was the 913 the only one I that range? and when did it occur?
  15. mark5pt56

    SK S+ deviation / Rimfire

    Try to track shots that may be from a cold clean barrel, first shot after the barrel cools, etc. I find that the first shot from a barrel after changing a target may show a higher velocity from average. I was trying a different cleaning method and didn't have lower velocity after cleaning but...
  16. mark5pt56

    Accuracy International AT-X

    I thought you were inquiring about the AICS/ATX chassis Oh--and no fucking shit
  17. mark5pt56

    Accuracy International AT-X

    https://www.milehighshooting.com/accuracy-international-at-x-aics-remington-700-sa-short-upper-chassis-de/
  18. mark5pt56

    SOLD BT APC 9 extractors

    ^^^^^^^^^^^^^
  19. mark5pt56

    Accuracy International AT-X

    I have a short ATX with 18", approx 3" of clearance.
  20. mark5pt56

    Questions for those with SilencerCo, Dead Air, and Banish suppressors

    Same here with DA/419 hub, Nomad 30. That XC TI is nice.
Top Bottom
Back
Home
Forums
Merch
Alerts