Search results

Search the forum Search Articles
  1. I

    1-8 / 1-10×

    If you don't need an exposed windage Turret, the Kahles K18i-2 has a 5.6 mil exposed elevation turret option with zero stop.
  2. I

    New Kahles K328i

    The red line is the end of the upper receiver. The bottom of the yellow tape (tape measure laid across the optics) is where the forward bolt on the Area 419 mount lands. It's about 2 slots of pic rail too little of cantilever. I think that this https://spuhrwebshop.com/en/isms/sp-6022m.html...
  3. I

    Rifle Scopes Kahles or ZCO upgrade

    I guess it depends on what the issue was. Since the topic was customer service, if it's a customer service issue, different entities handling customer service would seem very relevant.
  4. I

    Rifle Scopes Kahles or ZCO upgrade

    Swarovski Optik didn't take over Kahles distribution and service until 2017. A gen 1 issue would have been with a Totally different distributor, wouldn't it?
  5. I

    Can't get scope to zero low enough with 20MOA rail

    looks like 3 revs on that turret is not 120 moa. What you're describing sounds exactly like a 20 moa based scope at optical center.
  6. I

    Rifle Scopes LPVO Comparison: March Shorty 1-10x vs Kahles K18i-2 1-8x

    The K18i-2 is a 34mm tube. It has very forgiving eye relief/box, just like the 127 ft FOV 30mm K16i and gen 1 K18i.
  7. I

    Max range with 56mm scope on 20 moa rail + ?moa mount?

    ^^This BTW, the way to figure out the maximum MOA in your mount that your scope will be able to get a 100 yd zero with is to divide the Total Elevation Range of Adjustment by 2. So for the Razor you could have up to 60 MOA before you hit the floor of the scope. That assumes that the rifle...
  8. I

    7.62 NATO LPVO

    For field of view with an lpvo, get a Kahles K18i-2 with the dialing turret.
  9. I

    Steiner STR MIL reticle

    Just eyeballing it, looks like a .03 mil center dot, 0.1 mil hair thickness, 0.2 mil marks that are .1 mil tall/thick, mil marks that are .2 mils tall, little plus signs are .2x.2 mils, floating dots in the tree look like .1 mil, and line dots look like .05 mil.
  10. I

    Rifle Scopes Official Zero Compromise Optic News & Updates

    Yes, you can perform it as an aftermarket action without any patent implications, provided you can successfully disassemble the scope, reassemble it, and nitrogen purge it, however, they cannot. Presumably, doing this would void your warranty.
  11. I

    Rifle Scopes LPVO 1-6 vs. 1-8 - What´s the difference?

    It actually doesn't. You're comparing 100m field of view in feet to the 100 yd FOV listed above. The FOV of the SAI 1-6 is 6.5m @ 100m or 6.5 yds @ 100 yds, which is 19.5 ft @ 100 yds. At 1x the FOV is 38.8m @ 100m, or 38.8 yds at 100 yds, which is 116.4 ft @ 100 yds. The 1x is about the same...
  12. I

    Typical windage adjustments needed when zeroing rifle?

    To give you an idea, 8MOA between the front ring and rear (assume a 3" mount seperation) works out to be: 8 = X >>> X = 24/3600 >>> X = 0.0066 inches of lateral offset from the bore axis. 3600 3 Simply put, this could be anywhere. -Concentricity of...
  13. I

    Rifle Scopes Official Zero Compromise Optic News & Updates

    The company removing the limiter would put them in violation of the patent the same as selling the unmodified scope.
  14. I

    Scope for LWRC REPR MKII 7.62mm NATO 16.1"

    For an AR 10, I'd run a K328i over that Z8i if that's the glass you're looking for
  15. I

    New Kahles K328i

    I'm cautiously optimistic that the Geissele ZCO 36mm mount has a long enough cantilever on it to run on a small frame AR.
  16. I

    Rifle Scopes Official Zero Compromise Optic News & Updates

    If you take a calculator and multiply your dope values by Pi/10.8 you'll convert them all to Mils. Would probably take less time than that drive to Euro.
  17. I

    New Kahles K328i

    -Trigger cam isn't compatible -the ocular bell gets in the way of a 90 degree bolt throw -mounting requires a cantilever 1-piece -mag numbers aren't raised -glass is great -field of view is ridiculous -you love the left side windage and top-center parallax -you wish it was longer and had a 56mm...
  18. I

    SPR Optic

    Depends on your optic and what you're willing to spend. Illumination certainly solves a lot of low end mag reticle issues. Certainly unusable for holds, but then, if you're trying to do holds at sub 4x you're wrong. Even using a 5x erector is a big improvement over the tech available 20 years...
  19. I

    SPR Optic

    The goal was to be able to send a guy out with an accurized, scoped AR in a team of other guys with ARs at a time when virtually all ARs used 3.5x ACOGs or red dots. This allowed for shared ammo, while also giving additional range/precision to the group. Today's 6x and 8x erector scopes give...
  20. I

    SPR Optic

    You're 60 days out from Shot Show. Might make sense to wait.
Top Bottom
Back
Home
Forums
Merch
Alerts